main
Ray
Publish 0.1.0
a33c83a
PI6CG33201CZDIEX-13R
Diodes Incorporated · Clock Generators, PLLs, Frequency Synthesizers · TQFN-24(4x4)
PI6CG33201CZDIEX-13R from Diodes Incorporated, in a TQFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | XTAL_IN/CLK | input | Crystal input or CMOS reference input (25 MHz). |
| 2 | XTAL_OUT | output | Crystal output. |
| 3 | VDD_OSC | power_in | Power supply for oscillation circuit, nominal 3.3V. |
| 4 | SADR/REFOUT | bidirectional | CMOS latch to select SMBus address or LVCMOS REFOUT output; has an internal pull-down. |
| 5 | GND_REF | power_in | Ground for REFOUT. |
| 6 | GND_DIG | power_in | Ground for digital circuitry. |
| 7 | VDD_DIG | power_in | Power supply for digital circuitry, nominal 3.3V. |
| 8 | SCLK | input | CMOS SMBus clock input, 3.3V tolerant. |
| 9 | SDATA | bidirectional | CMOS SMBus data line, 3.3V tolerant. |
| 10 | GND | power_in | Ground pin. |
| 11 | VDD | power_in | Power supply, nominal 3.3V. |
| 12 | OE0# | input | Active low CMOS input enabling Q0 pair (1 = disable outputs, 0 = enable outputs); internal pull-down. |
| 13 | Q0+ | output | HCSL differential true clock output. |
| 14 | Q0- | output | HCSL differential complementary clock output. |
| 15 | GNDA | power_in | Ground for analog circuitry. |
| 16 | VDDA | power_in | Power supply for analog circuitry, nominal 3.3V per operating range. |
| 17 | Q1+ | output | HCSL differential true clock output. |
| 18 | Q1- | output | HCSL differential complementary clock output. |
| 19 | OE1# | input | Active low CMOS input enabling Q1 pair (1 = disable outputs, 0 = enable outputs); internal pull-down. |
| 20 | VDD | power_in | Power supply, nominal 3.3V. |
| 21 | GND | power_in | Ground pin. |
| 22 | PD# | input | CMOS input that samples latched inputs and starts up on first high assertion; low enters Power Down Mode; internal pull-up resistor. |
| 23 | SS_SEL_TRI | input | Tri-level latched input selecting spread at power up: 1 = 0.5% spread, M = spread off, 0 = spread off; internal pull-up and pull-down. |
| 24 | GND | power_in | Ground pin. |
| 25 | EPAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TQFN-24(4x4) |
| Category | Clock/Timing |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | VDD | 3.135 | 3.3 | 3.465 | V | VDD, VDDA, VDD_OSC, VDD_DIG | 5 |
| Ambient Temperature | TA | -40 | 85 | °C | Industrial grade | 5 | |
| Analog Power Supply Current | IDDA | 22 | 25 | mA | All outputs active @100MHz | 5 | |
| Power Supply Current | IDD | 24 | 30 | mA | All VDD, except VDDA, All outputs active @100MHz | 5 | |
| Analog Wake-on-LAN Current | IDDA_WL | 0.5 | 1 | mA | Q outputs off, REF output running | 5 | |
| Wake-on-LAN Current | IDD_WL | 3 | 6 | mA | All VDD, except VDDA, Q outputs off, REF output running | 5 | |
| Analog Power Down Current | IDDA_PD | 0.5 | 1 | mA | All outputs off | 5 | |
| Power Down Current | IDD_PD | 1 | 2 | mA | All outputs off | 5 | |
| Storage Temperature | -65 | 150 | °C | 5 | |||
| Supply Voltage to Ground | VDDxx | -0.5 | 4.6 | V | 5 | ||
| Input Voltage | -0.5 | 4.6 | V | -0.5V to VDD+0.5V, not exceed 4.6V | 5 | ||
| SMBus Input High Voltage | 3.6 | V | 5 | ||||
| Junction Temperature | 125 | °C | 5 | ||||
| Thermal Resistance Junction to Ambient | θJA | 54.4 | °C/W | Still air | 21 | ||
| Thermal Resistance Junction to Case | θJC | 40.8 | °C/W | 21 | |||
| SMBus Nominal Bus Voltage | VDDSMB | 2.7 | 3.6 | V | 6 | ||
| SMBus Input High Voltage | VIHSMB | 2.1 | 3.6 | V | SMBus, VDDSMB = 3.3V | 6 | |
| SMBus Input Low Voltage | VILSMB | 0.8 | V | SMBus, VDDSMB = 3.3V | 6 | ||
| SMBus Sink Current | ISMBSINK | 4 | mA | SMBus, at VOLSMB | 6 | ||
| SMBus Output Low Voltage | VOLSMB | 0.4 | V | SMBus, at ISMBSINK | 6 | ||
| SMBus Operating Frequency | fMAXSMB | 500 | kHz | Maximum frequency | 6 | ||
| SMBus Rise Time | tRMSB | 1000 | ns | (Max VIL - 0.15) to (Min VIH + 0.15) | 6 | ||
| SMBus Fall Time | tFMSB | 300 | ns | (Min VIH + 0.15) to (Max VIL - 0.15) | 6 | ||
| SS Modulation Frequency | fMOD | 30 | 31.8 | 33 | kHz | Triangular modulation | 6 |
| Input Low Voltage | VIL | -0.3 | V | Single-ended inputs, except SMBus | 7 | ||
| Input High Current | IIH | 5 | µA | Single-ended inputs, VIN = VDD | 7 | ||
| Input Low Current | IIL | -5 | µA | Single-ended inputs, VIN = 0V | 7 | ||
| Input High Current (pull up/down) | IIH | 50 | µA | Single-ended inputs with pull up / pull down resistor, VIN = VDD | 7 | ||
| Input Low Current (pull up/down) | IIL | -50 | µA | Single-ended inputs with pull up / pull down resistor, VIN = 0V | 7 | ||
| Input Capacitance | CIN | 1.5 | 5 | pF | 7 | ||
| Clock Stabilization | tSTAB | 0.75 | 1 | ms | From Power-Up and after input clock stabilization or de-assertion of PD# to 1st clock | 7 | |
| PD# De-assertion | tPDLAT | 20 | 300 | us | Differential outputs enable after PD# de-assertion | 7 | |
| REFOUT Duty Cycle | tDC | 45 | 50 | 55 | % | VT = VDD /2V, driven by a Xtal | 8 |
| REFOUT Duty Cycle Distortion | tDCDIS | -2 | 0 | 2 | % | VT = VDD /2V, driven by an external source | 8 |
| HCSL Output Voltage High | VOH | 660 | 784 | 850 | mV | Statistical measurement on single-ended signal using oscilloscope math function | 8 |
| HCSL Output Voltage Low | VOL | -150 | 150 | mV | 8 | ||
| HCSL Output Cross Voltage | VOC | 250 | 430 | 550 | mV | 8 | |
| HCSL Slew Rate (fast setting) | tRF | 2.5 | 3.2 | 4 | V/ns | Scope averaging on fast setting | 9 |
| HCSL Slew Rate (slow setting) | tRF | 2.2 | 3 | 3.7 | V/ns | Scope averaging on slow setting | 9 |
| HCSL Duty Cycle | tDC | 45 | 50 | 55 | % | Measured differentially, PLL Mode | 9 |
| HCSL Output Skew | tSKEW | 20 | 50 | ps | Averaging on, VT = 50% | 9 | |
| HCSL Cycle to Cycle Jitter | tjc-c | 20 | 50 | ps | 9 |
CAD (KiCad official)
- Symbol:
PI6CG33201CZDIEX-13R - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: TQFN-24(4x4) (KiCad packages3D, STEP)
- 3D model files:
pi6cg33201czdiex-13r-etched.step/pi6cg33201czdiex-13r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pi6cg33201czdiex-13r.step/pi6cg33201czdiex-13r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (24 pp, sha256
22b76ea9fdcd5d89, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PI6CG33201CZDIEX-13R
**Diodes Incorporated** · Clock Generators, PLLs, Frequency Synthesizers · TQFN-24(4x4)
PI6CG33201CZDIEX-13R from Diodes Incorporated, in a TQFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | XTAL_IN/CLK | input | Crystal input or CMOS reference input (25 MHz). |
| 2 | XTAL_OUT | output | Crystal output. |
| 3 | VDD_OSC | power_in | Power supply for oscillation circuit, nominal 3.3V. |
| 4 | SADR/REFOUT | bidirectional | CMOS latch to select SMBus address or LVCMOS REFOUT output; has an internal pull-down. |
| 5 | GND_REF | power_in | Ground for REFOUT. |
| 6 | GND_DIG | power_in | Ground for digital circuitry. |
| 7 | VDD_DIG | power_in | Power supply for digital circuitry, nominal 3.3V. |
| 8 | SCLK | input | CMOS SMBus clock input, 3.3V tolerant. |
| 9 | SDATA | bidirectional | CMOS SMBus data line, 3.3V tolerant. |
| 10 | GND | power_in | Ground pin. |
| 11 | VDD | power_in | Power supply, nominal 3.3V. |
| 12 | OE0# | input | Active low CMOS input enabling Q0 pair (1 = disable outputs, 0 = enable outputs); internal pull-down. |
| 13 | Q0+ | output | HCSL differential true clock output. |
| 14 | Q0- | output | HCSL differential complementary clock output. |
| 15 | GNDA | power_in | Ground for analog circuitry. |
| 16 | VDDA | power_in | Power supply for analog circuitry, nominal 3.3V per operating range. |
| 17 | Q1+ | output | HCSL differential true clock output. |
| 18 | Q1- | output | HCSL differential complementary clock output. |
| 19 | OE1# | input | Active low CMOS input enabling Q1 pair (1 = disable outputs, 0 = enable outputs); internal pull-down. |
| 20 | VDD | power_in | Power supply, nominal 3.3V. |
| 21 | GND | power_in | Ground pin. |
| 22 | PD# | input | CMOS input that samples latched inputs and starts up on first high assertion; low enters Power Down Mode; internal pull-up resistor. |
| 23 | SS_SEL_TRI | input | Tri-level latched input selecting spread at power up: 1 = 0.5% spread, M = spread off, 0 = spread off; internal pull-up and pull-down. |
| 24 | GND | power_in | Ground pin. |
| 25 | EPAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TQFN-24(4x4) |
| Category | Clock/Timing |
| Pins | 25 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | VDD | 3.135 | 3.3 | 3.465 | V | VDD, VDDA, VDD_OSC, VDD_DIG | 5 |
| Ambient Temperature | TA | -40 | | 85 | °C | Industrial grade | 5 |
| Analog Power Supply Current | IDDA | | 22 | 25 | mA | All outputs active @100MHz | 5 |
| Power Supply Current | IDD | | 24 | 30 | mA | All VDD, except VDDA, All outputs active @100MHz | 5 |
| Analog Wake-on-LAN Current | IDDA_WL | | 0.5 | 1 | mA | Q outputs off, REF output running | 5 |
| Wake-on-LAN Current | IDD_WL | | 3 | 6 | mA | All VDD, except VDDA, Q outputs off, REF output running | 5 |
| Analog Power Down Current | IDDA_PD | | 0.5 | 1 | mA | All outputs off | 5 |
| Power Down Current | IDD_PD | | 1 | 2 | mA | All outputs off | 5 |
| Storage Temperature | | -65 | | 150 | °C | | 5 |
| Supply Voltage to Ground | VDDxx | -0.5 | | 4.6 | V | | 5 |
| Input Voltage | | -0.5 | | 4.6 | V | -0.5V to VDD+0.5V, not exceed 4.6V | 5 |
| SMBus Input High Voltage | | | | 3.6 | V | | 5 |
| Junction Temperature | | | | 125 | °C | | 5 |
| Thermal Resistance Junction to Ambient | θJA | | 54.4 | | °C/W | Still air | 21 |
| Thermal Resistance Junction to Case | θJC | | 40.8 | | °C/W | | 21 |
| SMBus Nominal Bus Voltage | VDDSMB | 2.7 | | 3.6 | V | | 6 |
| SMBus Input High Voltage | VIHSMB | 2.1 | | 3.6 | V | SMBus, VDDSMB = 3.3V | 6 |
| SMBus Input Low Voltage | VILSMB | | | 0.8 | V | SMBus, VDDSMB = 3.3V | 6 |
| SMBus Sink Current | ISMBSINK | 4 | | | mA | SMBus, at VOLSMB | 6 |
| SMBus Output Low Voltage | VOLSMB | | | 0.4 | V | SMBus, at ISMBSINK | 6 |
| SMBus Operating Frequency | fMAXSMB | | | 500 | kHz | Maximum frequency | 6 |
| SMBus Rise Time | tRMSB | | | 1000 | ns | (Max VIL - 0.15) to (Min VIH + 0.15) | 6 |
| SMBus Fall Time | tFMSB | | | 300 | ns | (Min VIH + 0.15) to (Max VIL - 0.15) | 6 |
| SS Modulation Frequency | fMOD | 30 | 31.8 | 33 | kHz | Triangular modulation | 6 |
| Input Low Voltage | VIL | -0.3 | | | V | Single-ended inputs, except SMBus | 7 |
| Input High Current | IIH | | | 5 | µA | Single-ended inputs, VIN = VDD | 7 |
| Input Low Current | IIL | -5 | | | µA | Single-ended inputs, VIN = 0V | 7 |
| Input High Current (pull up/down) | IIH | | | 50 | µA | Single-ended inputs with pull up / pull down resistor, VIN = VDD | 7 |
| Input Low Current (pull up/down) | IIL | -50 | | | µA | Single-ended inputs with pull up / pull down resistor, VIN = 0V | 7 |
| Input Capacitance | CIN | 1.5 | | 5 | pF | | 7 |
| Clock Stabilization | tSTAB | | 0.75 | 1 | ms | From Power-Up and after input clock stabilization or de-assertion of PD# to 1st clock | 7 |
| PD# De-assertion | tPDLAT | 20 | | 300 | us | Differential outputs enable after PD# de-assertion | 7 |
| REFOUT Duty Cycle | tDC | 45 | 50 | 55 | % | VT = VDD /2V, driven by a Xtal | 8 |
| REFOUT Duty Cycle Distortion | tDCDIS | -2 | 0 | 2 | % | VT = VDD /2V, driven by an external source | 8 |
| HCSL Output Voltage High | VOH | 660 | 784 | 850 | mV | Statistical measurement on single-ended signal using oscilloscope math function | 8 |
| HCSL Output Voltage Low | VOL | -150 | | 150 | mV | | 8 |
| HCSL Output Cross Voltage | VOC | 250 | 430 | 550 | mV | | 8 |
| HCSL Slew Rate (fast setting) | tRF | 2.5 | 3.2 | 4 | V/ns | Scope averaging on fast setting | 9 |
| HCSL Slew Rate (slow setting) | tRF | 2.2 | 3 | 3.7 | V/ns | Scope averaging on slow setting | 9 |
| HCSL Duty Cycle | tDC | 45 | 50 | 55 | % | Measured differentially, PLL Mode | 9 |
| HCSL Output Skew | tSKEW | | 20 | 50 | ps | Averaging on, VT = 50% | 9 |
| HCSL Cycle to Cycle Jitter | tjc-c | | 20 | 50 | ps | | 9 |
## CAD (KiCad official)
- Symbol: `PI6CG33201CZDIEX-13R`
- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm`
- 3D model: TQFN-24(4x4) (KiCad packages3D, STEP)
- 3D model files: `pi6cg33201czdiex-13r-etched.step` / `pi6cg33201czdiex-13r-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pi6cg33201czdiex-13r.step` / `pi6cg33201czdiex-13r.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://www.diodes.com/assets/Datasheets/PI6CG33201CZDIEX-13R.pdf) (24 pp, sha256 `22b76ea9fdcd5d89`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pi6cg33201czdiex-13r-datasheet.pdf)