main
Ray
Publish 0.1.0
6772a0d
PI6CG18801ZLIEX
Diodes Incorporated · Clock Generators / Frequency Synthesizers / PLL · QFN-48(6x6)
PI6CG18801ZLIEX from Diodes Incorporated, in a QFN-48(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SS_SEL_TRI | input | Tri-level input latched at initial power-up to select the spread-spectrum amount: 1 = -0.5%, M = -0.25%, 0 = spread off. |
| 2 | GND_XTAL | power_in | Ground for the crystal oscillator circuit. |
| 3 | XTAL_IN/CLK | input | Crystal input or CMOS reference clock input. |
| 4 | XTAL_OUT | output | Crystal output. |
| 5 | VDD_OSC | power_in | Power supply for the oscillator circuitry, nominal 1.8 V. |
| 6 | VDD_REFOUT | power_in | Power supply for the buffered CMOS REFOUT output. |
| 7 | SADR/REFOUT | bidirectional | CMOS latch that selects the SMBus address (SADR) or the 1.8 V LVCMOS REFOUT function; has an internal pull-down. |
| 8 | GND_REFOUT | power_in | Ground for the REFOUT output. |
| 9 | GND_DIG | power_in | Ground for the digital circuitry. |
| 10 | SCLK | input | SMBus clock input, CMOS, 3.3 V tolerant. |
| 11 | SDATA | bidirectional | SMBus data line, CMOS, 3.3 V tolerant. |
| 12 | VDD_DIG | power_in | Power supply for the digital circuitry, nominal 1.8 V. |
| 13 | VDDO | power_in | Power supply for the differential outputs. |
| 14 | OE0# | input | Active-low output enable for the Q0 pair with internal pull-down; 1 disables the outputs, 0 enables them. |
| 15 | Q0+ | output | HCSL differential true clock output. |
| 16 | Q0- | output | HCSL differential complementary clock output. |
| 17 | OE1# | input | Active-low output enable for the Q1 pair with internal pull-down; 1 disables the outputs, 0 enables them. |
| 18 | Q1+ | output | HCSL differential true clock output. |
| 19 | Q1- | output | HCSL differential complementary clock output. |
| 20 | VDD | power_in | Power supply, nominal 1.8 V. |
| 21 | VDDO | power_in | Power supply for the differential outputs. |
| 22 | GND | power_in | Ground. |
| 23 | Q2+ | output | HCSL differential true clock output. |
| 24 | Q2- | output | HCSL differential complementary clock output. |
| 25 | OE2# | input | Active-low output enable for the Q2 pair with internal pull-down; 1 disables the outputs, 0 enables them. |
| 26 | Q3+ | output | HCSL differential true clock output. |
| 27 | Q3- | output | HCSL differential complementary clock output. |
| 28 | OE3# | input | Active-low output enable for the Q3 pair with internal pull-down; 1 disables the outputs, 0 enables them. |
| 29 | GNDA | power_in | Ground for the analog circuitry. |
| 30 | VDDA | power_in | Power supply for the analog circuitry; operating supply range 1.7 V to 1.9 V per the operating conditions. |
| 31 | VDDO | power_in | Power supply for the differential outputs. |
| 32 | Q4+ | output | HCSL differential true clock output. |
| 33 | Q4- | output | HCSL differential complementary clock output. |
| 34 | OE4# | input | Active-low output enable for the Q4 pair with internal pull-down; 1 disables the outputs, 0 enables them. |
| 35 | Q5+ | output | HCSL differential true clock output. |
| 36 | Q5- | output | HCSL differential complementary clock output. |
| 37 | OE5# | input | Active-low output enable for the Q5 pair with internal pull-down; 1 disables the outputs, 0 enables them. |
| 38 | VDD | power_in | Power supply, nominal 1.8 V. |
| 39 | VDDO | power_in | Power supply for the differential outputs. |
| 40 | GND | power_in | Ground. |
| 41 | Q6+ | output | HCSL differential true clock output. |
| 42 | Q6- | output | HCSL differential complementary clock output. |
| 43 | OE6# | input | Active-low output enable for the Q6 pair with internal pull-down; 1 disables the outputs, 0 enables them. |
| 44 | Q7+ | output | HCSL differential true clock output. |
| 45 | Q7- | output | HCSL differential complementary clock output. |
| 46 | OE7# | input | Active-low output enable for the Q7 pair with internal pull-down; 1 disables the outputs, 0 enables them. |
| 47 | VDDO | power_in | Power supply for the differential outputs. |
| 48 | PD# | input | Power-down input: low enters power-down mode and a high assertion exits it; the first high assertion samples the latched inputs and starts the device; internal pull-up. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | QFN-48(6x6) |
| Category | Clock and Timing |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | VDD, VDDA, VDD_OSC, VDDO, VDD_DIG | 1.7 | 1.8 | 1.9 | V | 5 | |
| Output Power Supply Voltage | VDD_REFOUT | 0.9975 | 1.9 | V | 5 | ||
| Analog Power Supply Current | IDDA | 6 | 9 | mA | All outputs active @100MHz | 5 | |
| Power Supply Current | IDD | 5 | 7.5 | mA | All VDD, except VDDA and VDDO, All outputs active @100MHz | 5 | |
| Power Supply Current for Outputs | IDDO | 28 | 35 | mA | All outputs active @100MHz | 5 | |
| Analog Power Supply Wake-on-LAN Current | IDDA_WL | 0.4 | 1 | mA | Q outputs off, REF output running | 5 | |
| Power Supply Wake-on-LAN Current | IDD_WL | 0.5 | 1 | mA | All VDD, except VDDA and VDDO, Q outputs off, REF output running | 5 | |
| Power Supply Wake-on-LAN Current for Outputs | IDDO_WL | 0.04 | 0.1 | mA | Q outputs off, REF output running | 5 | |
| Analog Power Supply Power Down Current | IDDA_PD | 0.4 | 1 | mA | All outputs off | 5 | |
| Power Supply Power Down Current | IDD_PD | 0.6 | 1 | mA | All outputs off | 5 | |
| Power Supply Current Power Down for Outputs | IDDO_PD | 0.0005 | 0.1 | mA | All outputs off | 5 | |
| Ambient Temperature | TA | -40 | 85 | °C | Industrial grade | 5 | |
| Storage Temperature | -65 | 150 | °C | 5 | |||
| Supply Voltage to Ground Potential | VDDxx | -0.5 | 2.5 | V | 5 | ||
| Input Voltage | -0.5 | 2.5 | V | -0.5V to VDD+0.5V, not exceed 2.5V | 5 | ||
| SMBus Input High Voltage | 3.6 | V | 5 | ||||
| ESD Protection (HBM) | 2000 | V | 5 | ||||
| Max Junction Temperature | 125 | ºC | 5 | ||||
| Internal pull up resistance | Rpu | 120 | KW | 6 | |||
| Internal pull down resistance | Rdn | 120 | KW | 6 | |||
| Internal capacitance on X_IN and X_OUT pins | CXTAL | 5 | pF | 6 | |||
| Pin inductance | LPIN | 7 | nH | 6 | |||
| Frequency (recommended crystal) | FREQ | 25 | MHz | 6 | |||
| Equivalent Series Resistance (recommended crystal) | ESR1 | 50 | W | 6 | |||
| Load Capacitance (recommended crystal) | Cload | 8 | pF | 6 | |||
| Shunt Capacitance (recommended crystal) | Cshunt | 7 | pF | 6 | |||
| Drive Level (recommended crystal) | 300 | uW | 6 | ||||
| Nominal bus voltage | VDDSMB | 1.7 | 3.6 | V | 6 | ||
| SMBus Input High Voltage | VIHSMB | 2.1 | 3.6 | V | SMBus, VDDSMB = 3.3V | 6 | |
| SMBus Input Low Voltage | VILSMB | 0.6 | V | SMBus, VDDSMB = 3.3V | 6 | ||
| SMBus operating frequency | fMAXSMB | 400 | kHz | Maximum frequency | 6 | ||
| SMBus rise time | tRMSB | 1000 | ns | (Max VIL - 0.15) to (Min VIH + 0.15) | 6 | ||
| SMBus fall time | tFMSB | 300 | ns | (Min VIH + 0.15) to (Max VIL - 0.15) | 6 | ||
| Input Frequency | fINPUT | 23 | 25 | 27 | MHz | 7 | |
| Clock stabilization | tSTAB | 0.6 | 1.8 | ms | From Power-Up and after input clock stabilization or de-assertion of PD# to 1st clock | 7 | |
| Output enable latency | tOELAT | 1 | 3 | clocks | Q start after OE# assertion; Q stop after OE# deassertion | 7 | |
| PD# de-assertion | tPDLAT | 20 | 300 | us | Differential outputs enable after PD# de-assertion | 7 | |
| Input Low Voltage | VIL | -0.3 | V | Single-ended inputs, except SMBus | 7 | ||
| Input High Current | IIH | 20 | mA | Single-ended inputs, VIN = VDD | 7 | ||
| Input Low Current | IIL | -20 | µA | Single-ended inputs, VIN = 0V | 7 | ||
| Input High Current with pull up / pull down resistor | IIH | 220 | mA | Single-ended inputs with pull up / pull down resistor, VIN = VDD | 7 | ||
| Input Low Current with pull up / pull down resistor | IIL | -220 | µA | Single-ended inputs with pull up / pull down resistor, VIN = 0V | 7 | ||
| Output Low Voltage | VOL | 0.45 | V | REFOUT, except SMBus; IOH = 2mA | 7 | ||
| CMOS Output impedance | ROUT | 20 | W | 7 | |||
| Input Capacitance | CIN | 1.5 | 5 | pF | 7 | ||
| SS Modulation Frequency | fMOD | 30 | 31.6 | 33 | kHz | Triangular modulation | 7 |
| REFOUT Duty Cycle | tDC | 45 | 50 | 55 | % | VT = VDD /2 V, driven by a Xtal | 8 |
| Output Voltage High | VOH | 660 | 784 | 850 | mV | Statistical measurement on single-ended signal using oscilloscope math function | 8 |
| Output Voltage Low | VOL | -150 | 150 | mV | 8 | ||
| Output Voltage Maximum | VOMAX | 816 | 1150 | mV | Measurement on single ended signal using absolute value | 8 | |
| Output Voltage Minimum | VOMIN | -300 | -42 | mV | 8 | ||
| Output Cross Voltage | VOC | 250 | 430 | 550 | mV | 8 | |
| Rise slew rate (fast setting) | tRF | 2 | 2.3 | 4 | V/ns | Scope averaging on fast setting | 9 |
| Rise slew rate (slow setting) | tRF | 1.1 | 1.9 | 2.9 | V/ns | Scope averaging on slow setting | 9 |
| Duty Cycle | tDC | 45 | 50 | 55 | % | Measured differentially, PLL Mode | 9 |
| Output Skew | tSKEW | 43 | 60 | ps | Averaging on, VT = 50% | 9 | |
| Cycle to cycle jitter | tjc-c | 42 | 50 | ps | 9 | ||
| Integrated phase jitter (RMS) | tjPHASE | 25 | 35 | 86 | ps | PCIe Gen 1 | 9 |
| Integrated phase jitter (RMS) | tjPHASE | 0.3 | 0.37 | 0.5 | ps | PLL BW of 2-4 or 2-5MHz, CDR =10MHz | 9 |
CAD (KiCad official)
- Symbol:
PI6CG18801ZLIEX - Footprint:
Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm - 3D model: QFN-48(6x6), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
pi6cg18801zliex-etched.step/pi6cg18801zliex-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pi6cg18801zliex.step/pi6cg18801zliex.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (20 pp, sha256
d98d1e9a76d0425a, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PI6CG18801ZLIEX
**Diodes Incorporated** · Clock Generators / Frequency Synthesizers / PLL · QFN-48(6x6)
PI6CG18801ZLIEX from Diodes Incorporated, in a QFN-48(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SS_SEL_TRI | input | Tri-level input latched at initial power-up to select the spread-spectrum amount: 1 = -0.5%, M = -0.25%, 0 = spread off. |
| 2 | GND_XTAL | power_in | Ground for the crystal oscillator circuit. |
| 3 | XTAL_IN/CLK | input | Crystal input or CMOS reference clock input. |
| 4 | XTAL_OUT | output | Crystal output. |
| 5 | VDD_OSC | power_in | Power supply for the oscillator circuitry, nominal 1.8 V. |
| 6 | VDD_REFOUT | power_in | Power supply for the buffered CMOS REFOUT output. |
| 7 | SADR/REFOUT | bidirectional | CMOS latch that selects the SMBus address (SADR) or the 1.8 V LVCMOS REFOUT function; has an internal pull-down. |
| 8 | GND_REFOUT | power_in | Ground for the REFOUT output. |
| 9 | GND_DIG | power_in | Ground for the digital circuitry. |
| 10 | SCLK | input | SMBus clock input, CMOS, 3.3 V tolerant. |
| 11 | SDATA | bidirectional | SMBus data line, CMOS, 3.3 V tolerant. |
| 12 | VDD_DIG | power_in | Power supply for the digital circuitry, nominal 1.8 V. |
| 13 | VDDO | power_in | Power supply for the differential outputs. |
| 14 | OE0# | input | Active-low output enable for the Q0 pair with internal pull-down; 1 disables the outputs, 0 enables them. |
| 15 | Q0+ | output | HCSL differential true clock output. |
| 16 | Q0- | output | HCSL differential complementary clock output. |
| 17 | OE1# | input | Active-low output enable for the Q1 pair with internal pull-down; 1 disables the outputs, 0 enables them. |
| 18 | Q1+ | output | HCSL differential true clock output. |
| 19 | Q1- | output | HCSL differential complementary clock output. |
| 20 | VDD | power_in | Power supply, nominal 1.8 V. |
| 21 | VDDO | power_in | Power supply for the differential outputs. |
| 22 | GND | power_in | Ground. |
| 23 | Q2+ | output | HCSL differential true clock output. |
| 24 | Q2- | output | HCSL differential complementary clock output. |
| 25 | OE2# | input | Active-low output enable for the Q2 pair with internal pull-down; 1 disables the outputs, 0 enables them. |
| 26 | Q3+ | output | HCSL differential true clock output. |
| 27 | Q3- | output | HCSL differential complementary clock output. |
| 28 | OE3# | input | Active-low output enable for the Q3 pair with internal pull-down; 1 disables the outputs, 0 enables them. |
| 29 | GNDA | power_in | Ground for the analog circuitry. |
| 30 | VDDA | power_in | Power supply for the analog circuitry; operating supply range 1.7 V to 1.9 V per the operating conditions. |
| 31 | VDDO | power_in | Power supply for the differential outputs. |
| 32 | Q4+ | output | HCSL differential true clock output. |
| 33 | Q4- | output | HCSL differential complementary clock output. |
| 34 | OE4# | input | Active-low output enable for the Q4 pair with internal pull-down; 1 disables the outputs, 0 enables them. |
| 35 | Q5+ | output | HCSL differential true clock output. |
| 36 | Q5- | output | HCSL differential complementary clock output. |
| 37 | OE5# | input | Active-low output enable for the Q5 pair with internal pull-down; 1 disables the outputs, 0 enables them. |
| 38 | VDD | power_in | Power supply, nominal 1.8 V. |
| 39 | VDDO | power_in | Power supply for the differential outputs. |
| 40 | GND | power_in | Ground. |
| 41 | Q6+ | output | HCSL differential true clock output. |
| 42 | Q6- | output | HCSL differential complementary clock output. |
| 43 | OE6# | input | Active-low output enable for the Q6 pair with internal pull-down; 1 disables the outputs, 0 enables them. |
| 44 | Q7+ | output | HCSL differential true clock output. |
| 45 | Q7- | output | HCSL differential complementary clock output. |
| 46 | OE7# | input | Active-low output enable for the Q7 pair with internal pull-down; 1 disables the outputs, 0 enables them. |
| 47 | VDDO | power_in | Power supply for the differential outputs. |
| 48 | PD# | input | Power-down input: low enters power-down mode and a high assertion exits it; the first high assertion samples the latched inputs and starts the device; internal pull-up. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | QFN-48(6x6) |
| Category | Clock and Timing |
| Pins | 49 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | VDD, VDDA, VDD_OSC, VDDO, VDD_DIG | 1.7 | 1.8 | 1.9 | V | | 5 |
| Output Power Supply Voltage | VDD_REFOUT | 0.9975 | | 1.9 | V | | 5 |
| Analog Power Supply Current | IDDA | | 6 | 9 | mA | All outputs active @100MHz | 5 |
| Power Supply Current | IDD | | 5 | 7.5 | mA | All VDD, except VDDA and VDDO, All outputs active @100MHz | 5 |
| Power Supply Current for Outputs | IDDO | | 28 | 35 | mA | All outputs active @100MHz | 5 |
| Analog Power Supply Wake-on-LAN Current | IDDA_WL | | 0.4 | 1 | mA | Q outputs off, REF output running | 5 |
| Power Supply Wake-on-LAN Current | IDD_WL | | 0.5 | 1 | mA | All VDD, except VDDA and VDDO, Q outputs off, REF output running | 5 |
| Power Supply Wake-on-LAN Current for Outputs | IDDO_WL | | 0.04 | 0.1 | mA | Q outputs off, REF output running | 5 |
| Analog Power Supply Power Down Current | IDDA_PD | | 0.4 | 1 | mA | All outputs off | 5 |
| Power Supply Power Down Current | IDD_PD | | 0.6 | 1 | mA | All outputs off | 5 |
| Power Supply Current Power Down for Outputs | IDDO_PD | | 0.0005 | 0.1 | mA | All outputs off | 5 |
| Ambient Temperature | TA | -40 | | 85 | °C | Industrial grade | 5 |
| Storage Temperature | | -65 | | 150 | °C | | 5 |
| Supply Voltage to Ground Potential | VDDxx | -0.5 | | 2.5 | V | | 5 |
| Input Voltage | | -0.5 | | 2.5 | V | -0.5V to VDD+0.5V, not exceed 2.5V | 5 |
| SMBus Input High Voltage | | | | 3.6 | V | | 5 |
| ESD Protection (HBM) | | | | 2000 | V | | 5 |
| Max Junction Temperature | | | | 125 | ºC | | 5 |
| Internal pull up resistance | Rpu | | 120 | | KW | | 6 |
| Internal pull down resistance | Rdn | | 120 | | KW | | 6 |
| Internal capacitance on X_IN and X_OUT pins | CXTAL | | 5 | | pF | | 6 |
| Pin inductance | LPIN | | 7 | | nH | | 6 |
| Frequency (recommended crystal) | FREQ | | 25 | | MHz | | 6 |
| Equivalent Series Resistance (recommended crystal) | ESR1 | | 50 | | W | | 6 |
| Load Capacitance (recommended crystal) | Cload | | 8 | | pF | | 6 |
| Shunt Capacitance (recommended crystal) | Cshunt | | 7 | | pF | | 6 |
| Drive Level (recommended crystal) | | | 300 | | uW | | 6 |
| Nominal bus voltage | VDDSMB | 1.7 | | 3.6 | V | | 6 |
| SMBus Input High Voltage | VIHSMB | 2.1 | | 3.6 | V | SMBus, VDDSMB = 3.3V | 6 |
| SMBus Input Low Voltage | VILSMB | | | 0.6 | V | SMBus, VDDSMB = 3.3V | 6 |
| SMBus operating frequency | fMAXSMB | | | 400 | kHz | Maximum frequency | 6 |
| SMBus rise time | tRMSB | | | 1000 | ns | (Max VIL - 0.15) to (Min VIH + 0.15) | 6 |
| SMBus fall time | tFMSB | | | 300 | ns | (Min VIH + 0.15) to (Max VIL - 0.15) | 6 |
| Input Frequency | fINPUT | 23 | 25 | 27 | MHz | | 7 |
| Clock stabilization | tSTAB | | 0.6 | 1.8 | ms | From Power-Up and after input clock stabilization or de-assertion of PD# to 1st clock | 7 |
| Output enable latency | tOELAT | | 1 | 3 | clocks | Q start after OE# assertion; Q stop after OE# deassertion | 7 |
| PD# de-assertion | tPDLAT | | 20 | 300 | us | Differential outputs enable after PD# de-assertion | 7 |
| Input Low Voltage | VIL | -0.3 | | | V | Single-ended inputs, except SMBus | 7 |
| Input High Current | IIH | | | 20 | mA | Single-ended inputs, VIN = VDD | 7 |
| Input Low Current | IIL | -20 | | | µA | Single-ended inputs, VIN = 0V | 7 |
| Input High Current with pull up / pull down resistor | IIH | | | 220 | mA | Single-ended inputs with pull up / pull down resistor, VIN = VDD | 7 |
| Input Low Current with pull up / pull down resistor | IIL | -220 | | | µA | Single-ended inputs with pull up / pull down resistor, VIN = 0V | 7 |
| Output Low Voltage | VOL | | | 0.45 | V | REFOUT, except SMBus; IOH = 2mA | 7 |
| CMOS Output impedance | ROUT | | 20 | | W | | 7 |
| Input Capacitance | CIN | | 1.5 | 5 | pF | | 7 |
| SS Modulation Frequency | fMOD | 30 | 31.6 | 33 | kHz | Triangular modulation | 7 |
| REFOUT Duty Cycle | tDC | 45 | 50 | 55 | % | VT = VDD /2 V, driven by a Xtal | 8 |
| Output Voltage High | VOH | 660 | 784 | 850 | mV | Statistical measurement on single-ended signal using oscilloscope math function | 8 |
| Output Voltage Low | VOL | -150 | | 150 | mV | | 8 |
| Output Voltage Maximum | VOMAX | 816 | | 1150 | mV | Measurement on single ended signal using absolute value | 8 |
| Output Voltage Minimum | VOMIN | -300 | | -42 | mV | | 8 |
| Output Cross Voltage | VOC | 250 | 430 | 550 | mV | | 8 |
| Rise slew rate (fast setting) | tRF | 2 | 2.3 | 4 | V/ns | Scope averaging on fast setting | 9 |
| Rise slew rate (slow setting) | tRF | 1.1 | 1.9 | 2.9 | V/ns | Scope averaging on slow setting | 9 |
| Duty Cycle | tDC | 45 | 50 | 55 | % | Measured differentially, PLL Mode | 9 |
| Output Skew | tSKEW | | 43 | 60 | ps | Averaging on, VT = 50% | 9 |
| Cycle to cycle jitter | tjc-c | | 42 | 50 | ps | | 9 |
| Integrated phase jitter (RMS) | tjPHASE | 25 | 35 | 86 | ps | PCIe Gen 1 | 9 |
| Integrated phase jitter (RMS) | tjPHASE | 0.3 | 0.37 | 0.5 | ps | PLL BW of 2-4 or 2-5MHz, CDR =10MHz | 9 |
## CAD (KiCad official)
- Symbol: `PI6CG18801ZLIEX`
- Footprint: `Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm`
- 3D model: QFN-48(6x6), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files: `pi6cg18801zliex-etched.step` / `pi6cg18801zliex-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pi6cg18801zliex.step` / `pi6cg18801zliex.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://www.diodes.com/assets/Datasheets/PI6CG18801ZLIEX.pdf) (20 pp, sha256 `d98d1e9a76d0425a`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pi6cg18801zliex-datasheet.pdf)