main
Ray Publish 0.1.0 dccd6f8

PI6CDBL401BZHIEX

Diodes Incorporated · Clock Buffers, Drivers · TQFN-32-EP(5x5)

PI6CDBL401BZHIEX from Diodes Incorporated, in a TQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 HIBW_BYPM_LOBW# input Trilevel input that selects High BW, Bypass or Low BW PLL operating mode.
2 FB_DNC output True clock of the differential feedback, internally connected to the feedback input on this pin, and must not be connected to anything externally.
3 FB_DNC# output Complement clock of the differential feedback, internally connected to the feedback input on this pin, and must not be connected to anything externally.
4 VDDR3.3 power_in 3.3V power for the differential input clock receiver, to be treated as an analog power rail and filtered appropriately.
5 CLK_IN input True input for the differential reference clock.
6 CLK_IN# input Complementary input for the differential reference clock.
7 GNDR power_in Analog ground pin for the differential input receiver.
8 GNDDIG power_in Ground pin for digital circuitry.
9 VDDDIG3.3 power_in 3.3V digital power (dirty power).
10 SCLK_3.3 input Clock pin of the SMBus circuitry, 3.3V tolerant.
11 SDATA_3.3 bidirectional Data pin of the SMBus circuitry, 3.3V tolerant.
12 OE0# input Active low input enabling DIF pair 0, with internal pull-down; 1 disables outputs and 0 enables outputs.
13 CLK0 output Differential true clock output 0.
14 CLK0# output Differential complementary clock output 0.
15 GND power_in Ground pin.
16 VDDO1.8 power_in Power supply for outputs, range from 1.8V to 3.3V.
17 OE1# input Active low input enabling DIF pair 1, with internal pull-down; 1 disables outputs and 0 enables outputs.
18 CLK1 output Differential true clock output 1.
19 CLK1# output Differential complementary clock output 1.
20 GNDA power_in Ground pin for the PLL core.
21 VDDA3.3 power_in 3.3V power for the PLL core.
22 CLK2 output Differential true clock output 2.
23 CLK2# output Differential complementary clock output 2.
24 OE2# input Active low input enabling DIF pair 2, with internal pull-down; 1 disables outputs and 0 enables outputs.
25 VDDO1.8 power_in Power supply for outputs, range from 1.8V to 3.3V.
26 GND power_in Ground pin.
27 CLK3 output Differential true clock output 3.
28 CLK3# output Differential complementary clock output 3.
29 OE3# input Active low input enabling DIF pair 3, with internal pull-down; 1 disables outputs and 0 enables outputs.
30 GND power_in Ground pin.
31 CKPWRGD_PD# input Notifies the device to sample latched inputs and start up on first high assertion; low enters Power Down Mode and subsequent high assertions exit it, with internal pull-up.
32 SADR_tri input Tri-level latch that selects the SMBus address per the SMBus Address Selection Table.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package TQFN-32-EP(5x5)
Category Clock and Timing
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage core analog VDDX 3 3.3 3.6 V Supply voltage for core, analog 5
Supply Voltage outputs 3.3V VDDO 2.97 3.3 3.63 V VDDO = 3.3V+/-10% 5
Supply Voltage outputs 2.5V VDDO 2.25 2.5 2.75 V VDDO = 2.5V+/-10% 5
Supply Voltage outputs 1.8V VDDO 1.62 1.8 1.98 V VDDO = 1.8V+/-10% 5
Ambient Operating Temperature TA -40 25 85 °C Ambient Operating Temperature 5
Ambient Operating Temperature -40 85 °C Ambient Operating Temperature 5
Storage Temperature -65 150 °C Storage Temperature 5
Junction Temperature 125 °C Junction Temperature 5
Input High Voltage differential CLK_IN VIHDIF 600 800 1150 mV Differential inputs (single-ended measurement) 5
Input Low Voltage differential CLK_IN VILDIF 0 300 mV Differential inputs (single-ended measurement) 5
Input Common Mode Voltage VCOM 300 725 mV Common Mode Input Voltage 5
Input Amplitude Peak to Peak VSWING 300 1450 mV Peak to Peak value (VIHDIF - VILDIF) 5
Input Leakage Current IIN -5 5 uA VIN = VDD, VIN = GND 5
Input Duty Cycle dtin 45 55 % Measurement from differential wavefrom 5
Input Jitter Cycle to Cycle JDIFIn 0 150 ps Differential Measurement 5
Input Current IIN -5 5 uA Single-ended inputs, VIN = GND, VIN = VDD 6
Input Current with internal pull resistors IINP -200 200 uA Single-ended inputs; VIN = 0 V inputs with internal pull-up; VIN = VDD inputs with internal pull-down 6
Input Frequency bypass mode fin 1 400 MHz Bypass mode 6
Input Frequency 100MHz PLL mode fin 95 100 105 MHz 100MHz PLL mode 6
Input SS Modulation Frequency fMODIN 30 31.5 33 kHz Allowable Frequency (Triangular Modulation) 6
CLK start after OE# assertion delay tDRVPD 300 us CLK output enable after CKPWRGD_PD# de-assertion 6
SMBus Input Low Voltage VILSMB 0.8 V 6
SMBus Input High Voltage VIHSMB 2.1 3.6 V 6
Output Low Voltage VOL 0.45 V Single-ended outputs, except SMBus. IOL = -2mA 6
SMBus Output Low Voltage VOLSMB 0.4 V @ IPULLUP 7
SMBus Sink Current IPULLUP 4 mA @ VOL 7
Nominal Bus Voltage VDDSMB 2.7 3.6 V 3.3V bus voltage 7
SCLK/SDATA Rise Time tRSMB 1000 ns (Max VIL - 0.15) to (Min VIH + 0.15) 7
SCLK/SDATA Fall Time tFSMB 300 ns (Min VIH + 0.15) to (Max VIL - 0.15) 7
SMBus Operating Frequency fMAXSMB 400 kHz Maximum SMBus operating frequency 7
Slew rate 2.0V/ns setting Trf 1 2 3 V/ns Scope averaging on 2.0V/ns setting @100MHz output 7
Slew rate 3.0V/ns setting Trf 2 3 4.5 V/ns Scope averaging on 3.0V/ns setting @100MHz output 7
Voltage Low VLOW -150 150 mV Statistical measurement on single-ended signal using oscilloscope math function. (Scope averaging on) 7
Max Voltage Vmax 1150 mV Measurement on single ended signal using absolute value. (Scope averaging off) 7
Min Voltage Vmin -300 mV 7
Crossing Voltage (abs) Vcross_abs 250 550 mV Scope averaging off 7
Duty Cycle tDC 45 55 % Measured differentially, PLL Mode 8
Duty Cycle Distortion tDCD -1 0 1 % Measured differentially, Bypass Mode@100MHz 8
Skew Input to Output PLL Mode tpdPLL -250 250 ps PLL Mode VT = 50% 8

CAD (KiCad official)

  • Symbol: PI6CDBL401BZHIEX
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: TQFN-32-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: pi6cdbl401bzhiex-etched.step / pi6cdbl401bzhiex-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pi6cdbl401bzhiex.step / pi6cdbl401bzhiex.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (17 pp, sha256 a3623300cea2b580, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF