Generated by kicad-footprint-generator · KiCad file format 20260206
PI6CB33802ZLIEX
Diodes Incorporated · Clock Buffers, Drivers · TQFN-48-EP(6x6)
PI6CB33802ZLIEX from Diodes Incorporated, in a TQFN-48-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SADR_TRI | input | Tri-level latch that selects the SMBus address and has an internal pulldown. |
| 2 | BW_SEL_TRI | input | Tri-level latch that selects low-loop bandwidth, PLL bypass, or high-loop bandwidth, and has both an internal pullup and an internal pulldown. |
| 3 | NC | unconnected | Internally connected for the feedback loop; do not connect this pin. |
| 4 | NC | unconnected | Internally connected for the feedback loop; do not connect this pin. |
| 5 | VDD_R | power_in | Power supply for the input differential buffers, 3.135 V to 3.465 V (3.3 V nominal). |
| 6 | IN+ | input | Differential true clock input (HCSL, 100 MHz; 50, 125 or 133.33 MHz selectable via SMBus), with differential input high voltage up to 1150 mV. |
| 7 | IN- | input | Differential complementary clock input paired with IN+. |
| 8 | GND_R | power_in | Ground for the input differential buffers. |
| 9 | GND_DIG | power_in | Ground for the digital circuitry. |
| 10 | SCLK | input | SMBus clock input; CMOS, 3.3 V tolerant. |
| 11 | SDATA | bidirectional | SMBus data line; CMOS, 3.3 V tolerant. |
| 12 | VDD_DIG | power_in | Power supply for the digital circuitry, nominal 3.3 V (3.135 V to 3.465 V). |
| 13 | VDDO | power_in | Power supply for the differential outputs; rated 0.95 V to 3.465 V per the operating conditions table. |
| 14 | OE0# | input | Active-low output enable for the Q0 pair (0 = enable outputs, 1 = disable outputs); has an internal pulldown. |
| 15 | Q0+ | output | HCSL differential true clock output with on-chip termination (default Zout 85 Ω). |
| 16 | Q0- | output | HCSL differential complementary clock output with on-chip termination (default Zout 85 Ω). |
| 17 | OE1# | input | Active-low output enable for the Q1 pair (0 = enable outputs, 1 = disable outputs); has an internal pulldown. |
| 18 | Q1+ | output | HCSL differential true clock output with on-chip termination (default Zout 85 Ω). |
| 19 | Q1- | output | HCSL differential complementary clock output with on-chip termination (default Zout 85 Ω). |
| 20 | VDD | power_in | Power supply, nominal 3.3 V (3.135 V to 3.465 V). |
| 21 | VDDO | power_in | Power supply for the differential outputs; rated 0.95 V to 3.465 V per the operating conditions table. |
| 22 | GND | power_in | Ground. |
| 23 | Q2+ | output | HCSL differential true clock output with on-chip termination (default Zout 85 Ω). |
| 24 | Q2- | output | HCSL differential complementary clock output with on-chip termination (default Zout 85 Ω). |
| 25 | OE2# | input | Active-low output enable for the Q2 pair (0 = enable outputs, 1 = disable outputs); has an internal pulldown. |
| 26 | Q3+ | output | HCSL differential true clock output with on-chip termination (default Zout 85 Ω). |
| 27 | Q3- | output | HCSL differential complementary clock output with on-chip termination (default Zout 85 Ω). |
| 28 | OE3# | input | Active-low output enable for the Q3 pair (0 = enable outputs, 1 = disable outputs); has an internal pulldown. |
| 29 | GNDA | power_in | Ground for the analog circuitry. |
| 30 | VDDA | power_in | Power supply for the analog circuitry, 3.135 V to 3.465 V (3.3 V nominal). |
| 31 | VDDO | power_in | Power supply for the differential outputs; rated 0.95 V to 3.465 V per the operating conditions table. |
| 32 | Q4+ | output | HCSL differential true clock output with on-chip termination (default Zout 85 Ω). |
| 33 | Q4- | output | HCSL differential complementary clock output with on-chip termination (default Zout 85 Ω). |
| 34 | OE4# | input | Active-low output enable for the Q4 pair (0 = enable outputs, 1 = disable outputs); has an internal pulldown. |
| 35 | Q5+ | output | HCSL differential true clock output with on-chip termination (default Zout 85 Ω). |
| 36 | Q5- | output | HCSL differential complementary clock output with on-chip termination (default Zout 85 Ω). |
| 37 | OE5# | input | Active-low output enable for the Q5 pair (0 = enable outputs, 1 = disable outputs); has an internal pulldown. |
| 38 | VDD | power_in | Power supply, nominal 3.3 V (3.135 V to 3.465 V). |
| 39 | VDDO | power_in | Power supply for the differential outputs; rated 0.95 V to 3.465 V per the operating conditions table. |
| 40 | GND | power_in | Ground. |
| 41 | Q6+ | output | HCSL differential true clock output with on-chip termination (default Zout 85 Ω). |
| 42 | Q6- | output | HCSL differential complementary clock output with on-chip termination (default Zout 85 Ω). |
| 43 | OE6# | input | Active-low output enable for the Q6 pair (0 = enable outputs, 1 = disable outputs); has an internal pulldown. |
| 44 | Q7+ | output | HCSL differential true clock output with on-chip termination (default Zout 85 Ω). |
| 45 | Q7- | output | HCSL differential complementary clock output with on-chip termination (default Zout 85 Ω). |
| 46 | OE7# | input | Active-low output enable for the Q7 pair (0 = enable outputs, 1 = disable outputs); has an internal pulldown. |
| 47 | VDDO | power_in | Power supply for the differential outputs; rated 0.95 V to 3.465 V per the operating conditions table. |
| 48 | PD# | input | Input that makes the device sample latched inputs and start up on first high assertion; low enters Power Down Mode, and has an internal pullup. |
| 49 | EPAD | power_in | Exposed pad; connect to ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TQFN-48-EP(6x6) |
| Category | RTC/Clock Chip |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | VDD, VDDA, VDD_R, VDD_DIG | 3.135 | 3.3 | 3.465 | V | 5 | |
| Output Power Supply Voltage | VDDO | 0.95 | 3.465 | V | 5 | ||
| Ambient Temperature | TA | -40 | 85 | °C | Industrial grade | 5 | |
| Analog Power Supply Current | IDDA | 21 | 25 | mA | VDDA, PLL mode, All outputs active @ 100MHz | 5 | |
| Power Supply Current | IDD | 34 | 40 | mA | VDD + VDD_DIG + VDD_R, All outputs active @ 100MHz | 5 | |
| Power Supply Current for Outputs | IDDO | 31 | 36 | mA | VDDO, PLL mode, All outputs active @ 100MHz | 5 | |
| Analog Power Supply Power Down Current | IDDA_PD | 0.5 | 1 | mA | VDDA, PLL mode, All outputs LOW/LOW | 5 | |
| Power Supply Power Down Current | IDD_PD | 1 | 2 | mA | VDD + VDD_DIG + VDD_R, All outputs LOW/LOW | 5 | |
| Power Supply Current Power Down for Outputs | IDDO_PD | 0.04 | 0.1 | mA | VDDO, All outputs LOW/LOW | 5 | |
| Pin Inductance | LPIN | 7 | nH | 5 | |||
| Nominal Bus Voltage | VDDSMB | 2.7 | 3.6 | V | 6 | ||
| SMBus Input High Voltage | VIHSMB | 2.1 | 3.6 | V | SMBus, VDDSMB = 3.3V | 6 | |
| SMBus Input Low Voltage | VILSMB | 0.8 | V | SMBus, VDDSMB = 3.3V | 6 | ||
| SMBus Sink Current | ISMBSINK | 4 | mA | SMBus, at VOLSMB | 6 | ||
| SMBus Output Low Voltage | VOLSMB | 0.4 | V | SMBus, at ISMBSINK | 6 | ||
| SMBus Operating Frequency | fMAXSMB | 500 | kHz | Maximum frequency | 6 | ||
| Input Low Voltage | VIL | -0.3 | V | Single-ended inputs, except SMBus | 6 | ||
| Input High Current | IIH | 5 | µA | Single-ended inputs, VIN = VDD | 6 | ||
| Input Low Current | IIL | -5 | µA | Single-ended inputs, VIN = 0V | 6 | ||
| Input Capacitance | CIN | 1.5 | 5 | pF | 6 | ||
| Output Enable Latency | tOELAT | 1 | 3 | clocks | Q start after OE# assertion; Q stop after OE# deassertion | 7 | |
| PD# Deassertion | tPDLAT | 20 | 300 | µs | Differential outputs enable after PD# deassertion | 7 | |
| Diff. Input High Voltage | VIHDIF | 600 | 800 | 1150 | mV | IN+, IN-, single-end measurement | 7 |
| Diff. Input Low Voltage | VILDIF | -300 | 0 | 300 | mV | IN+, IN-, single-end measurement | 7 |
| Diff. Input Common Mode Voltage | VCOM | 150 | 900 | mV | 7 | ||
| Diff. Input Swing Voltage | VSWING | 300 | 2900 | mV | Peak to peak value (VIHDIF - VILDIF) | 7 | |
| Input Frequency | fINBP | 1 | 200 | MHz | PLL Bypass mode | 7 | |
| Input Frequency 100MHz PLL | fIN100 | 99.9 | 100 | 100.1 | MHz | 100MHz PLL | 7 |
| Input Frequency 133MHz PLL | fIN133 | 133.2 | 133.33 | 133.46 | MHz | 133MHz PLL | 7 |
| Input SS Modulation Freq. PCIe | fMODI-PCIe | 30 | 33 | kHz | Allowable frequency for PCIe applications (Triangular Modulation) | 7 | |
| Diff. Input Slew Rate | tRF | 0.4 | V/ns | Measured differentially | 7 | ||
| Diff. Input Leakage Current | IIN | -5 | 0.01 | 5 | uA | VIN = VDD, VIN = GND | 7 |
| Output Voltage High | VOH | 660 | 784 | 850 | mV | Statistical measurement on single-ended signal using oscilloscope math function | 8 |
| Output Voltage Low | VOL | -150 | 150 | mV | 8 | ||
| Output Voltage Maximum | VOMAX | 816 | 1150 | mV | Measurement on single ended signal using absolute value | 8 | |
| Output Voltage Minimum | VOMIN | -300 | -42 | mV | 8 | ||
| Output Cross Voltage | VOC | 250 | 430 | 550 | mV | 8 | |
| VOC Magnitude Change | DVOC | 12 | 140 | mV | 8 | ||
| Output Frequency | fOUT | 50 | 100 | 133.33 | MHz | 8 | |
| PLL Bandwidth (high BW) | BW | 1.3 | 3.2 | 3.6 | MHz | -3dB point in High Bandwidth Mode | 8 |
| PLL Bandwidth (low BW) | BW | 0.7 | 1.7 | 1.9 | MHz | -3dB point in Low Bandwidth Mode | 8 |
| Slew Rate (fast setting) | tRF | 2.5 | 3.2 | 4 | V/ns | Scope averaging on fast setting | 8 |
| Slew Rate (slow setting) | tRF | 2.2 | 3 | 3.7 | V/ns | Scope averaging on slow setting | 8 |
| Output Skew | tSKEW | 35 | 50 | ps | Averaging on, VT = 50% | 8 | |
| Propagation Delay (PLL Bypass) | tPDELAY | 2000 | 2500 | 3000 | ps | PLL Bypass mode, VT = 50% | 8 |
| Propagation Delay (PLL mode) | tPDELAY | -200 | 90 | 200 | ps | PLL mode, VT = 50% | 8 |
| Duty Cycle | tDC | 45 | 50 | 55 | % | Measured differentially, PLL Mode | 8 |
| Duty Cycle Distortion | tDCD | -3.5 | 0 | 3.5 | % | Measured differentially, PLL Bypass Mode at 100MHz | 8 |
| Cycle-to-Cycle Jitter | tjc-c | 14 | 50 | ps | PLL mode | 8 | |
| Slew Rate Matching | DtRF | 7 | 15 | % | Scope averaging on | 8 | |
| Diff. Input Cycle to cycle jitter | tjc-c | 125 | ps | Measured differentially | 7 | ||
| Storage Temperature | -65 | 150 | °C | 5 | |||
| Supply Voltage to Ground Potential | VDDxx | -0.5 | 4.6 | V | 5 | ||
| Input Voltage | -0.5 | V | Max VDD+0.5V, not exceed 4.6V | 5 | |||
| SMBus Input High Voltage (absolute maximum) | 3.6 | V | 5 | ||||
| ESD Protection (HBM) | 2000 | V | 5 | ||||
| Thermal Resistance Junction to Ambient | θJA | 38.15 | °C/W | Still air | 18 | ||
| Thermal Resistance Junction to Case | θJC | 24.66 | °C/W | 18 |
CAD (KiCad official)
- Symbol:
PI6CB33802ZLIEX - Footprint:
Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm - 3D model: TQFN-48-EP(6x6), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
pi6cb33802zliex-etched.step/pi6cb33802zliex-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pi6cb33802zliex.step/pi6cb33802zliex.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (21 pp, sha256
f1cc0f18808f64e6, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).