Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PI6CB33801ZLIEX

Diodes Incorporated · Clock Buffers, Drivers · TQFN-48-EP(6x6)

PI6CB33801ZLIEX from Diodes Incorporated, in a TQFN-48-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SADR_TRI input Tri-level latch input that selects the SMBus address, with an internal pull-down.
2 BW_SEL_TRI input Tri-level latch input that selects low-loop bandwidth, PLL bypass, or high-loop bandwidth, with both internal pull-up and pull-down.
3 NC unconnected Internally connected for the feedback loop; do not connect this pin.
4 NC unconnected Internally connected for the feedback loop; do not connect this pin.
5 VDD_R power_in Power supply for the input differential buffers.
6 IN+ input Differential true clock input.
7 IN- input Differential complementary clock input.
8 GND_R power_in Ground for the input differential buffers.
9 GND_DIG power_in Ground for the digital circuitry.
10 SCLK input SMBus clock input, 3.3V tolerant.
11 SDATA bidirectional SMBus data line, 3.3V tolerant.
12 VDD_DIG power_in Power supply for the digital circuitry, nominal 3.3V.
13 VDDO power_in Power supply for the differential outputs.
14 OE0# input Active-low input that enables the Q0 pair (1 = disable outputs, 0 = enable outputs), with an internal pull-down.
15 Q0+ output Differential true clock output.
16 Q0- output Differential complementary clock output.
17 OE1# input Active-low input that enables the Q1 pair (1 = disable outputs, 0 = enable outputs), with an internal pull-down.
18 Q1+ output Differential true clock output.
19 Q1- output Differential complementary clock output.
20 VDD power_in Power supply, nominal 3.3V.
21 VDDO power_in Power supply for the differential outputs.
22 GND power_in Ground.
23 Q2+ output Differential true clock output.
24 Q2- output Differential complementary clock output.
25 OE2# input Active-low input that enables the Q2 pair (1 = disable outputs, 0 = enable outputs), with an internal pull-down.
26 Q3+ output Differential true clock output.
27 Q3- output Differential complementary clock output.
28 OE3# input Active-low input that enables the Q3 pair (1 = disable outputs, 0 = enable outputs), with an internal pull-down.
29 GNDA power_in Ground for the analog circuitry.
30 VDDA power_in Power supply for the analog circuitry.
31 VDDO power_in Power supply for the differential outputs.
32 Q4+ output Differential true clock output.
33 Q4- output Differential complementary clock output.
34 OE4# input Active-low input that enables the Q4 pair (1 = disable outputs, 0 = enable outputs), with an internal pull-down.
35 Q5+ output Differential true clock output.
36 Q5- output Differential complementary clock output.
37 OE5# input Active-low input that enables the Q5 pair (1 = disable outputs, 0 = enable outputs), with an internal pull-down.
38 VDD power_in Power supply, nominal 3.3V.
39 VDDO power_in Power supply for the differential outputs.
40 GND power_in Ground.
41 Q6+ output Differential true clock output.
42 Q6- output Differential complementary clock output.
43 OE6# input Active-low input that enables the Q6 pair (1 = disable outputs, 0 = enable outputs), with an internal pull-down.
44 Q7+ output Differential true clock output.
45 Q7- output Differential complementary clock output.
46 OE7# input Active-low input that enables the Q7 pair (1 = disable outputs, 0 = enable outputs), with an internal pull-down.
47 VDDO power_in Power supply for the differential outputs.
48 PD# input Input that makes the device sample latched inputs and start up on first high assertion; low enters Power Down Mode and a subsequent high exits it, with an internal pull-up.
49 EPAD power_in Exposed pad; connect to ground.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package TQFN-48-EP(6x6)
Category RTC/Clock Chip
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply Voltage VDD, VDDA, VDD_R, VDD_DIG 3.135 3.3 3.465 V 5
Output Power Supply Voltage VDDO 0.95 3.465 V 5
Analog Power Supply Current IDDA 21 25 mA VDDA, PLL mode, All outputs active @ 100MHz 5
Power Supply Current IDD 34 40 mA VDD + VDD_DIG + VDD_R, All outputs active @ 100MHz 5
Power Supply Current for Outputs IDDO 31 36 mA VDDO, PLL mode, All outputs active @ 100MHz 5
Analog Power Supply Current Power Down IDDA_PD 0.5 1 mA VDDA, PLL mode, All outputs LOW/LOW 5
Power Supply Power Down Current IDD_PD 1 2 mA VDD + VDD_DIG + VDD_R, All outputs LOW/LOW 5
Power Supply Current Power Down for Outputs IDDO_PD 0.04 0.1 mA VDDO, All outputs LOW/LOW 5
Ambient Temperature TA -40 85 °C Industrial grade 5
Internal Pull-up Resistance Rpu 120 KW 5
Internal Pull-down Resistance Rdn 120 KW 5
Pin Inductance LPIN 7 nH 5
Nominal Bus Voltage VDDSMB 2.7 3.6 V 6
SMBus Input High Voltage VIHSMB 2.1 3.6 V SMBus, VDDSMB = 3.3V 6
SMBus Input Low Voltage VILSMB 0.8 V SMBus, VDDSMB = 3.3V 6
SMBus Sink Current ISMBSINK 4 mA SMBus, at VOLSMB 6
SMBus Output Low Voltage VOLSMB 0.4 V SMBus, at ISMBSINK 6
SMBus Operating Frequency fMAXSMB 500 kHz Maximum frequency 6
SMBus Rise Time tRMSB 1000 ns (Max VIL - 0.15) to (Min VIH + 0.15) 6
SMBus Fall Time tFMSB 300 ns (Min VIH + 0.15) to (Max VIL - 0.15) 6
Input Low Voltage VIL -0.3 V Single-ended inputs, except SMBus; max is 0.25 VDD as printed 6
Input High Current IIH 5 µA Single-ended inputs, VIN = VDD 6
Input Low Current IIL -5 µA Single-ended inputs, VIN = 0V 6
Input High Current with pull-up/pull-down IIH 50 µA Single-ended inputs with pull-up/pull-down resistor, VIN = VDD 6
Input Low Current with pull-up/pull-down IIL -50 µA Single-ended inputs with pull-up/pull-down resistor, VIN = 0V 6
Input Capacitance CIN 1.5 5 pF 6
Output Enable Latency tOELAT 1 3 clocks Q start after OE# assertion; Q stop after OE# deassertion 6
PD# Deassertion tPDLAT 20 300 µs Differential outputs enable after PD# deassertion 6
Diff. Input High Voltage VIHDIF 600 800 1150 mV IN+, IN-, single-end measurement 7
Diff. Input Low Voltage VILDIF -300 0 300 mV IN+, IN-, single-end measurement 7
Diff. Input Swing Voltage VSWING 300 2900 mV Peak to peak value (VIHDIF - VILDIF) 7
Input Frequency fINBP 1 200 MHz PLL Bypass mode 7
Input Frequency 100MHz PLL fIN100 99.9 100 100.1 MHz 100MHz PLL 7
Diff. Input Slew Rate tRF 0.4 V/ns Measured differentially 7
Diff. Input Leakage Current IIN -5 0.01 5 uA VIN = VDD, VIN = GND 7
Output Frequency fOUT 50 100 133.33 MHz 8
PLL Bandwidth High BW 1.3 3.2 3.6 MHz -3dB point in High-Bandwidth Mode 8
PLL Bandwidth Low BW 0.7 1.7 1.9 MHz -3dB point in Low-Bandwidth Mode 8
Slew Rate fast setting tRF 2.5 3.2 4 V/ns Scope averaging on fast setting 8
Slew Rate slow setting tRF 2.2 3 3.7 V/ns Scope averaging on slow setting 8
Slew Rate Matching DtRF 7 15 % Scope averaging on 8
Output Skew tSKEW 35 50 ps Averaging on, VT = 50% 8
Propagation Delay PLL Bypass Mode tPDELAY 2000 2500 3000 ps PLL Bypass Mode, VT = 50% 8
Propagation Delay PLL Mode tPDELAY -200 90 200 ps PLL Mode, VT = 50% 8
Duty Cycle tDC 45 50 55 % Measured differentially, PLL Mode 8
Duty Cycle Distortion tDCD -3.5 0 3.5 % Measured differentially, PLL Bypass Mode at 100MHz 8
Cycle-to-Cycle Jitter PLL mode tjc-c 14 50 ps PLL mode 8
Output Voltage High VOH 660 784 850 mV Statistical measurement on single-ended signal using oscilloscope math function 8
Output Voltage Low VOL -150 150 mV 8
Output Voltage Maximum VOMAX 816 1150 mV Measurement on single ended signal using absolute value 8
Output Voltage Minimum VOMIN -300 -42 mV 8
Output Cross Voltage VOC 250 430 550 mV 8
Storage Temperature -65 150 °C 5
Supply Voltage to Ground Potential VDDxx -0.5 4.6 V 5
SMBus Input High Voltage 3.6 V 5
Thermal Resistance Junction to Ambient θJA 38.15 °C/W Still air 18
Thermal Resistance Junction to Case θJC 24.66 °C/W 18

CAD (KiCad official)

  • Symbol: PI6CB33801ZLIEX
  • Footprint: Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm
  • 3D model: TQFN-48-EP(6x6) (KiCad packages3D, STEP)
  • 3D model files: pi6cb33801zliex-etched.step / pi6cb33801zliex-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pi6cb33801zliex.step / pi6cb33801zliex.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (21 pp, sha256 f1b51e417cb69400, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF