main
Ray
Publish 0.1.0
0464ee7
PI6CB33401ZHIEX
Diodes Incorporated · Clock Buffers, Drivers · TQFN-32-EP(5x5)
PI6CB33401ZHIEX from Diodes Incorporated, in a TQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BW_SEL_TRI | input | Tri-level latch selects low loop bandwidth, PLL bypass, or high loop bandwidth, and the pin has both internal pull-up and pull-down. |
| 2 | NC | unconnected | Internally connected for the feedback loop, so this pin must not be connected externally. |
| 3 | NC | unconnected | Internally connected for the feedback loop, so this pin must not be connected externally. |
| 4 | VDD_R | power_in | Supplies the input differential buffers, nominal 3.3V (3.135V to 3.465V). |
| 5 | IN+ | input | Differential true clock input for the reference clock, 100MHz with 50, 125 or 133.33MHz selectable via SMBus. |
| 6 | IN- | input | Differential complementary clock input for the reference clock. |
| 7 | NC | unconnected | Do not connect this pin. |
| 8 | GND_DIG | power_in | Ground for the digital circuitry. |
| 9 | SCLK | input | CMOS SMBus clock input that is 3.3V tolerant. |
| 10 | SDATA | bidirectional | CMOS SMBus data line that is 3.3V tolerant. |
| 11 | VDD_DIG | power_in | Supplies the digital circuitry, nominal 3.3V. |
| 12 | OE0# | input | Active-low output enable for the Q0 pair (1 = disable outputs, 0 = enable outputs), with an internal pull-down. |
| 13 | Q0+ | output | HCSL differential true clock output, with on-chip 100Ω termination by default. |
| 14 | Q0- | output | HCSL differential complementary clock output, with on-chip termination by default. |
| 15 | VDDO | power_in | Supplies the differential outputs, nominal 3.3V (3.135V to 3.465V). |
| 16 | NC | unconnected | Do not connect this pin. |
| 17 | Q1+ | output | HCSL differential true clock output, with on-chip termination by default. |
| 18 | Q1- | output | HCSL differential complementary clock output, with on-chip termination by default. |
| 19 | OE1# | input | Active-low output enable for the Q1 pair (1 = disable outputs, 0 = enable outputs), with an internal pull-down. |
| 20 | NC | unconnected | Do not connect this pin. |
| 21 | VDDA | power_in | Supplies the analog circuitry, nominal 3.3V (3.135V to 3.465V). |
| 22 | Q2+ | output | HCSL differential true clock output, with on-chip termination by default. |
| 23 | Q2- | output | HCSL differential complementary clock output, with on-chip termination by default. |
| 24 | OE2# | input | Active-low output enable for the Q2 pair (1 = disable outputs, 0 = enable outputs), with an internal pull-down. |
| 25 | VDDO | power_in | Supplies the differential outputs, nominal 3.3V (3.135V to 3.465V). |
| 26 | NC | unconnected | Do not connect this pin. |
| 27 | Q3+ | output | HCSL differential true clock output, with on-chip termination by default. |
| 28 | Q3- | output | HCSL differential complementary clock output, with on-chip termination by default. |
| 29 | OE3# | input | Active-low output enable for the Q3 pair (1 = disable outputs, 0 = enable outputs), with an internal pull-down. |
| 30 | NC | unconnected | Do not connect this pin. |
| 31 | PD# | input | Low enters power-down mode and a subsequent high exits it; the pin has an internal pull-up resistor. |
| 32 | SADR_TRI | input | Tri-level latch selects the SMBus address on first application of PD#, with an internal pull-down. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TQFN-32-EP(5x5) |
| Category | RTC/Clock Chip |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | VDDO, VDDA, VDD_R, VDD_DIG | 3.135 | 3.3 | 3.465 | V | 5 | |
| Ambient Temperature | TA | -40 | 85 | °C | Industrial grade | 5 | |
| Storage Temperature | -65 | 150 | °C | 5 | |||
| Supply Voltage to Ground Potential | VDDxx | -0.5 | 4.6 | V | 5 | ||
| SMBus Input High Voltage | 3.6 | V | 5 | ||||
| ESD Protection (HBM) | 2000 | V | 5 | ||||
| Analog Power Supply Current | IDDA | 21 | 25 | mA | VDDA, PLL mode, All outputs active @100MHz | 5 | |
| Digital Power Supply Current | IDD_DIG | 0.1 | 1 | mA | VDD_DIG, All outputs active @100MHz | 5 | |
| Power Supply Current for Inputs and Outputs | IDDO+R | 48 | 54 | mA | VDDO + VDD_R, PLL mode, All outputs active @100MHz | 5 | |
| Analog Power Supply Power Down Current | IDDA_PD | 0.5 | 1 | mA | VDDA, PLL mode, All outputs LOW/LOW | 5 | |
| Digital Power Supply Power Down Current | IDD_DIG_PD | 0.1 | 1 | mA | VDD_DIG, All outputs LOW/LOW | 5 | |
| Power Supply Current for Inputs and Outputs Power Down | IDDO_R_PD | 1 | 2 | mA | VDDO, VDD_R All outputs LOW/LOW | 5 | |
| Internal pull up resistance | Rpu | 120 | KW | 5 | |||
| Internal pull down resistance | Rdn | 120 | KW | 5 | |||
| Nominal bus voltage | VDDSMB | 2.7 | 3.6 | V | 6 | ||
| SMBus Input High Voltage | VIHSMB | 2.1 | 3.6 | V | SMBus, VDDSMB = 3.3V | 6 | |
| SMBus Input Low Voltage | VILSMB | 0.8 | V | SMBus, VDDSMB = 3.3V | 6 | ||
| SMBus sink current | ISMBSINK | 4 | mA | SMBus, at VOLSMB | 6 | ||
| SMBus Output Low Voltage | VOLSMB | 0.4 | V | SMBus, at ISMBSINK | 6 | ||
| SMBus operating frequency | fMAXSMB | 500 | kHz | Maximum frequency | 6 | ||
| SMBus rise time | tRMSB | 1000 | ns | (Max VIL - 0.15) to (Min VIH + 0.15) | 6 | ||
| SMBus fall time | tFMSB | 300 | ns | (Min VIH + 0.15) to (Max VIL - 0.15) | 6 | ||
| Input Low Voltage | VIL | -0.3 | V | Single-ended inputs, except SMBus | 6 | ||
| Input High Current | IIH | 5 | mA | Single-ended inputs, VIN = VDD | 6 | ||
| Input Low Current | IIL | -5 | µA | Single-ended inputs, VIN = 0V | 6 | ||
| Input High Current | IIH | 50 | mA | Single-ended inputs with pull up / pull down resistor, VIN = VDD | 6 | ||
| Input Low Current | IIL | -50 | µA | Single-ended inputs with pull up / pull down resistor, VIN = 0V | 6 | ||
| Input Capacitance | CIN | 1.5 | 5 | pF | 6 | ||
| Output enable latency | tOELAT | 1 | 3 | clocks | Q start after OE# assertion; Q stop after OE# deassertion | 7 | |
| PD# de-assertion | tPDLAT | 20 | 300 | us | Differential outputs enable after PD# de-assertion | 7 | |
| Diff. Input High Voltage | VIHDIF | 600 | 800 | 1150 | mV | IN+, IN-, single-end measurement | 7 |
| Diff. Input Low Voltage | VILDIF | -300 | 0 | 300 | mV | IN+, IN-, single-end measurement | 7 |
| Diff. Input Common Mode Voltage | VCOM | 150 | 900 | mV | 7 | ||
| Diff. Input Swing Voltage | VSWING | 300 | 2900 | mV | Peak to peak value (VIHDIF - VILDIF) | 7 | |
| Input Frequency | fINBP | 1 | 200 | MHz | PLL Bypass mode | 7 | |
| Input Frequency 100MHz PLL | fIN100 | 99.9 | 100 | 100.1 | MHz | PLL | 7 |
| Input Frequency 133MHz PLL | fIN133 | 133.2 | 133.33 | 133.46 | MHz | PLL | 7 |
| Input Frequency 125MHz PLL | fIN125 | 124.87 | 125 | 125.12 | MHz | PLL | 7 |
| Input Frequency 50MHz PLL | fIN50 | 49.95 | 50 | 50.05 | MHz | PLL | 7 |
| Input SS Modulation Freq. PCIe | fMODI-PCIe | 30 | 33 | kHz | Allowable frequency for PCIe applications (Triangular Modulation) | 7 | |
| Input SS Modulation Freq. non-PCIe | fMODIN-non-PCIe | 0 | 46 | kHz | Allowable frequency for non-PCIe applications (Triangular Modulation) | 7 | |
| Clock stabilization | tSTAB | 0.75 | 1 | ms | From VDD Power-Up and after input clock stabilization or de-assertion of PD# to 1st clock | 7 | |
| Diff. Input Slew Rate | tRF | 0.4 | V/ns | Measured differentially | 7 | ||
| Diff. Input Leakage Current | IIN | -5 | 0.01 | 5 | uA | VIN = VDD, VIN = GND | 7 |
| Diff. Input Duty Cycle | tDC | 45 | 55 | % | Measured differentially | 7 | |
| Diff. Input Cycle to cycle jitter | tjc-c | 125 | ps | Measured differentially | 7 | ||
| Output Frequency | fOUT | 50 | 100 | 133.33 | MHz | 8 | |
| PLL bandwidth -3dB point High Bandwidth Mode | BW | 1.3 | 3.2 | 3.6 | MHz | -3dB point in High Bandwidth Mode | 8 |
| PLL bandwidth -3dB point Low Bandwidth Mode | BW | 0.7 | 1.7 | 1.9 | MHz | -3dB point in Low Bandwidth Mode | 8 |
| Slew rate fast setting | tRF | 2.5 | 3.2 | 4 | V/ns | Scope averaging on fast setting | 8 |
| Slew rate slow setting | tRF | 2.2 | 3 | 3.7 | V/ns | Scope averaging on slow setting | 8 |
| Output Skew | tSKEW | 21 | 50 | ps | Averaging on, VT = 50% | 8 | |
| Propagation delay PLL Bypass mode | tPDELAY | 2000 | 2500 | 3000 | ps | PLL Bypass mode, VT = 50% | 8 |
| Propagation delay PLL mode | tPDELAY | -200 | 90 | 200 | ps | PLL mode, VT = 50% | 8 |
| Duty Cycle | tDC | 45 | 50 | 55 | % | Measured differentially, PLL Mode | 8 |
| Thermal Resistance Junction to Ambient | θJA | 44.7 | °C/W | Still air | 17 | ||
| Thermal Resistance Junction to Case | θJC | 21.7 | °C/W | 17 |
CAD (KiCad official)
- Symbol:
PI6CB33401ZHIEX - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: TQFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
pi6cb33401zhiex-etched.step/pi6cb33401zhiex-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pi6cb33401zhiex.step/pi6cb33401zhiex.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (20 pp, sha256
89e8689b3c2da3fd, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PI6CB33401ZHIEX
**Diodes Incorporated** · Clock Buffers, Drivers · TQFN-32-EP(5x5)
PI6CB33401ZHIEX from Diodes Incorporated, in a TQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BW_SEL_TRI | input | Tri-level latch selects low loop bandwidth, PLL bypass, or high loop bandwidth, and the pin has both internal pull-up and pull-down. |
| 2 | NC | unconnected | Internally connected for the feedback loop, so this pin must not be connected externally. |
| 3 | NC | unconnected | Internally connected for the feedback loop, so this pin must not be connected externally. |
| 4 | VDD_R | power_in | Supplies the input differential buffers, nominal 3.3V (3.135V to 3.465V). |
| 5 | IN+ | input | Differential true clock input for the reference clock, 100MHz with 50, 125 or 133.33MHz selectable via SMBus. |
| 6 | IN- | input | Differential complementary clock input for the reference clock. |
| 7 | NC | unconnected | Do not connect this pin. |
| 8 | GND_DIG | power_in | Ground for the digital circuitry. |
| 9 | SCLK | input | CMOS SMBus clock input that is 3.3V tolerant. |
| 10 | SDATA | bidirectional | CMOS SMBus data line that is 3.3V tolerant. |
| 11 | VDD_DIG | power_in | Supplies the digital circuitry, nominal 3.3V. |
| 12 | OE0# | input | Active-low output enable for the Q0 pair (1 = disable outputs, 0 = enable outputs), with an internal pull-down. |
| 13 | Q0+ | output | HCSL differential true clock output, with on-chip 100Ω termination by default. |
| 14 | Q0- | output | HCSL differential complementary clock output, with on-chip termination by default. |
| 15 | VDDO | power_in | Supplies the differential outputs, nominal 3.3V (3.135V to 3.465V). |
| 16 | NC | unconnected | Do not connect this pin. |
| 17 | Q1+ | output | HCSL differential true clock output, with on-chip termination by default. |
| 18 | Q1- | output | HCSL differential complementary clock output, with on-chip termination by default. |
| 19 | OE1# | input | Active-low output enable for the Q1 pair (1 = disable outputs, 0 = enable outputs), with an internal pull-down. |
| 20 | NC | unconnected | Do not connect this pin. |
| 21 | VDDA | power_in | Supplies the analog circuitry, nominal 3.3V (3.135V to 3.465V). |
| 22 | Q2+ | output | HCSL differential true clock output, with on-chip termination by default. |
| 23 | Q2- | output | HCSL differential complementary clock output, with on-chip termination by default. |
| 24 | OE2# | input | Active-low output enable for the Q2 pair (1 = disable outputs, 0 = enable outputs), with an internal pull-down. |
| 25 | VDDO | power_in | Supplies the differential outputs, nominal 3.3V (3.135V to 3.465V). |
| 26 | NC | unconnected | Do not connect this pin. |
| 27 | Q3+ | output | HCSL differential true clock output, with on-chip termination by default. |
| 28 | Q3- | output | HCSL differential complementary clock output, with on-chip termination by default. |
| 29 | OE3# | input | Active-low output enable for the Q3 pair (1 = disable outputs, 0 = enable outputs), with an internal pull-down. |
| 30 | NC | unconnected | Do not connect this pin. |
| 31 | PD# | input | Low enters power-down mode and a subsequent high exits it; the pin has an internal pull-up resistor. |
| 32 | SADR_TRI | input | Tri-level latch selects the SMBus address on first application of PD#, with an internal pull-down. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TQFN-32-EP(5x5) |
| Category | RTC/Clock Chip |
| Pins | 33 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | VDDO, VDDA, VDD_R, VDD_DIG | 3.135 | 3.3 | 3.465 | V | | 5 |
| Ambient Temperature | TA | -40 | | 85 | °C | Industrial grade | 5 |
| Storage Temperature | | -65 | | 150 | °C | | 5 |
| Supply Voltage to Ground Potential | VDDxx | -0.5 | | 4.6 | V | | 5 |
| SMBus Input High Voltage | | | | 3.6 | V | | 5 |
| ESD Protection (HBM) | | | | 2000 | V | | 5 |
| Analog Power Supply Current | IDDA | | 21 | 25 | mA | VDDA, PLL mode, All outputs active @100MHz | 5 |
| Digital Power Supply Current | IDD_DIG | | 0.1 | 1 | mA | VDD_DIG, All outputs active @100MHz | 5 |
| Power Supply Current for Inputs and Outputs | IDDO+R | | 48 | 54 | mA | VDDO + VDD_R, PLL mode, All outputs active @100MHz | 5 |
| Analog Power Supply Power Down Current | IDDA_PD | | 0.5 | 1 | mA | VDDA, PLL mode, All outputs LOW/LOW | 5 |
| Digital Power Supply Power Down Current | IDD_DIG_PD | | 0.1 | 1 | mA | VDD_DIG, All outputs LOW/LOW | 5 |
| Power Supply Current for Inputs and Outputs Power Down | IDDO_R_PD | | 1 | 2 | mA | VDDO, VDD_R All outputs LOW/LOW | 5 |
| Internal pull up resistance | Rpu | | 120 | | KW | | 5 |
| Internal pull down resistance | Rdn | | 120 | | KW | | 5 |
| Nominal bus voltage | VDDSMB | 2.7 | | 3.6 | V | | 6 |
| SMBus Input High Voltage | VIHSMB | 2.1 | | 3.6 | V | SMBus, VDDSMB = 3.3V | 6 |
| SMBus Input Low Voltage | VILSMB | | | 0.8 | V | SMBus, VDDSMB = 3.3V | 6 |
| SMBus sink current | ISMBSINK | | | 4 | mA | SMBus, at VOLSMB | 6 |
| SMBus Output Low Voltage | VOLSMB | | | 0.4 | V | SMBus, at ISMBSINK | 6 |
| SMBus operating frequency | fMAXSMB | | | 500 | kHz | Maximum frequency | 6 |
| SMBus rise time | tRMSB | | | 1000 | ns | (Max VIL - 0.15) to (Min VIH + 0.15) | 6 |
| SMBus fall time | tFMSB | | | 300 | ns | (Min VIH + 0.15) to (Max VIL - 0.15) | 6 |
| Input Low Voltage | VIL | -0.3 | | | V | Single-ended inputs, except SMBus | 6 |
| Input High Current | IIH | | | 5 | mA | Single-ended inputs, VIN = VDD | 6 |
| Input Low Current | IIL | -5 | | | µA | Single-ended inputs, VIN = 0V | 6 |
| Input High Current | IIH | | | 50 | mA | Single-ended inputs with pull up / pull down resistor, VIN = VDD | 6 |
| Input Low Current | IIL | -50 | | | µA | Single-ended inputs with pull up / pull down resistor, VIN = 0V | 6 |
| Input Capacitance | CIN | 1.5 | | 5 | pF | | 6 |
| Output enable latency | tOELAT | 1 | | 3 | clocks | Q start after OE# assertion; Q stop after OE# deassertion | 7 |
| PD# de-assertion | tPDLAT | 20 | | 300 | us | Differential outputs enable after PD# de-assertion | 7 |
| Diff. Input High Voltage | VIHDIF | 600 | 800 | 1150 | mV | IN+, IN-, single-end measurement | 7 |
| Diff. Input Low Voltage | VILDIF | -300 | 0 | 300 | mV | IN+, IN-, single-end measurement | 7 |
| Diff. Input Common Mode Voltage | VCOM | 150 | | 900 | mV | | 7 |
| Diff. Input Swing Voltage | VSWING | 300 | | 2900 | mV | Peak to peak value (VIHDIF - VILDIF) | 7 |
| Input Frequency | fINBP | 1 | | 200 | MHz | PLL Bypass mode | 7 |
| Input Frequency 100MHz PLL | fIN100 | 99.9 | 100 | 100.1 | MHz | PLL | 7 |
| Input Frequency 133MHz PLL | fIN133 | 133.2 | 133.33 | 133.46 | MHz | PLL | 7 |
| Input Frequency 125MHz PLL | fIN125 | 124.87 | 125 | 125.12 | MHz | PLL | 7 |
| Input Frequency 50MHz PLL | fIN50 | 49.95 | 50 | 50.05 | MHz | PLL | 7 |
| Input SS Modulation Freq. PCIe | fMODI-PCIe | 30 | | 33 | kHz | Allowable frequency for PCIe applications (Triangular Modulation) | 7 |
| Input SS Modulation Freq. non-PCIe | fMODIN-non-PCIe | 0 | | 46 | kHz | Allowable frequency for non-PCIe applications (Triangular Modulation) | 7 |
| Clock stabilization | tSTAB | 0.75 | | 1 | ms | From VDD Power-Up and after input clock stabilization or de-assertion of PD# to 1st clock | 7 |
| Diff. Input Slew Rate | tRF | | | 0.4 | V/ns | Measured differentially | 7 |
| Diff. Input Leakage Current | IIN | -5 | 0.01 | 5 | uA | VIN = VDD, VIN = GND | 7 |
| Diff. Input Duty Cycle | tDC | 45 | | 55 | % | Measured differentially | 7 |
| Diff. Input Cycle to cycle jitter | tjc-c | | | 125 | ps | Measured differentially | 7 |
| Output Frequency | fOUT | 50 | 100 | 133.33 | MHz | | 8 |
| PLL bandwidth -3dB point High Bandwidth Mode | BW | 1.3 | 3.2 | 3.6 | MHz | -3dB point in High Bandwidth Mode | 8 |
| PLL bandwidth -3dB point Low Bandwidth Mode | BW | 0.7 | 1.7 | 1.9 | MHz | -3dB point in Low Bandwidth Mode | 8 |
| Slew rate fast setting | tRF | 2.5 | 3.2 | 4 | V/ns | Scope averaging on fast setting | 8 |
| Slew rate slow setting | tRF | 2.2 | 3 | 3.7 | V/ns | Scope averaging on slow setting | 8 |
| Output Skew | tSKEW | | 21 | 50 | ps | Averaging on, VT = 50% | 8 |
| Propagation delay PLL Bypass mode | tPDELAY | 2000 | 2500 | 3000 | ps | PLL Bypass mode, VT = 50% | 8 |
| Propagation delay PLL mode | tPDELAY | -200 | 90 | 200 | ps | PLL mode, VT = 50% | 8 |
| Duty Cycle | tDC | 45 | 50 | 55 | % | Measured differentially, PLL Mode | 8 |
| Thermal Resistance Junction to Ambient | θJA | | 44.7 | | °C/W | Still air | 17 |
| Thermal Resistance Junction to Case | θJC | | 21.7 | | °C/W | | 17 |
## CAD (KiCad official)
- Symbol: `PI6CB33401ZHIEX`
- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`
- 3D model: TQFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files: `pi6cb33401zhiex-etched.step` / `pi6cb33401zhiex-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pi6cb33401zhiex.step` / `pi6cb33401zhiex.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://www.diodes.com/assets/Datasheets/PI6CB33401ZHIEX.pdf) (20 pp, sha256 `89e8689b3c2da3fd`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pi6cb33401zhiex-datasheet.pdf)