component
PI3A27518ZDEX
Public Made by Adomby adom
Diodes Incorporated Analog Switches, Multiplexers, TQFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
PI3A27518ZDEX
Diodes Incorporated · Analog Switches, Multiplexers · TQFN-24(4x4)
PI3A27518ZDEX from Diodes Incorporated, in a TQFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COM1 | passive | Common signal path for channel 1, switched to NO1 or NC1 per the select truth table; analog signal range is 0 to VDD. |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | COM2 | passive | Common signal path for channel 2, switched to NO2 or NC2 per the select truth table; analog signal range is 0 to VDD. |
| 4 | COM3 | passive | Common signal path for channel 3, switched to NO3 or NC3 per the select truth table; analog signal range is 0 to VDD. |
| 5 | VDD | power_in | Positive power supply; operating voltage is 1.65V to 3.6V. |
| 6 | COM4 | passive | Common signal path for channel 4, switched to NO4 or NC4 per the select truth table; analog signal range is 0 to VDD. |
| 7 | COM5 | passive | Common signal path for channel 5, switched to NO5 or NC5 per the select truth table; analog signal range is 0 to VDD. |
| 8 | NO1 | passive | Normally open signal path for channel 1; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 9 | COM6 | passive | Common signal path for channel 6, switched to NO6 or NC6 per the select truth table; analog signal range is 0 to VDD. |
| 10 | NO2 | passive | Normally open data port for channel 2; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 11 | IN2 | input | Select input 2 that chooses the NO or NC path for channels 4-6 together with IN1; control input must be held HIGH or LOW and must not float, with logic levels up to VDD. |
| 12 | NO3 | passive | Normally open signal path for channel 3; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 13 | NO6 | passive | Normally open signal path for channel 6; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 14 | NO4 | passive | Normally open signal path for channel 4; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 15 | NO5 | passive | Normally open signal path for channel 5; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 16 | NC5 | unconnected | Normally closed signal path for channel 5; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 17 | EN | input | Enable input, active low; when driven HIGH all channels are OFF, and the control input must be held HIGH or LOW and must not float. |
| 18 | NC4 | unconnected | Normally closed signal path for channel 4; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 19 | NC6 | unconnected | Normally closed signal path for channel 6; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 20 | NC3 | unconnected | Normally closed signal path for channel 3; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 21 | IN1 | input | Select input 1 that chooses the NO or NC path for channels 1-3 together with IN2; control input must be held HIGH or LOW and must not float, with logic levels up to VDD. |
| 22 | NC2 | unconnected | Normally closed signal path for channel 2; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 23 | NC1 | unconnected | Normally closed signal path for channel 1; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 24 | N.C | unconnected | No connect; not internally bonded and left unconnected. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TQFN-24(4x4) |
| Category | Interface |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage | VDD | 1.65 | 3.6 | V | 4 | ||
| Control Input Voltage | VIN | 0 | V | max = VDD | 4 | ||
| Switch Input Voltage | VINPUT | -0.3 | V | max = VDD | 4 | ||
| Operating Temperature | TA | -40 | 25 | 85 | °C | 4 | |
| Storage Temperature | -65 | 150 | °C | 4 | |||
| Ambient Temperature with Power Applied | -40 | 85 | °C | 4 | |||
| Supply Voltage | VDD | -0.5 | 4.6 | V | 4 | ||
| Control Input Voltage | VINx | 0 | 4.6 | V | 4 | ||
| DC Input Voltage | VINPUT | -0.5 | 4.6 | V | 4 | ||
| Continuous Current NO_NC_COM | -50 | 50 | mA | 4 | |||
| ESD (HBM) | 2.5 | kV | 4 | ||||
| ESD (CDM) | 1.5 | kV | 4 | ||||
| Analog Signal Range | VNO, VNC, VCOM | 0 | V | -40°C to 85°C; max = VDD | 4 | ||
| On-Resistance | RON | 4.4 | 5.2 | Ω | +25°C; VDD = 3V, ICOM = -32mA, 0 ≤ VNO or VNC ≤ VDD, Test Circuit 1 | 4 | |
| On-Resistance | RON | 7.6 | Ω | -40°C to 85°C; VDD = 3V, ICOM = -32mA, 0 ≤ VNO or VNC ≤ VDD, Test Circuit 1 | 4 | ||
| On-Resistance Match Between Channels | ΔRON | 0.3 | 0.7 | Ω | +25°C; VDD = 3V, ICOM = -32mA, VNO or VNC = 2.1V, Test Circuit 1 | 4 | |
| On-Resistance Match Between Channels | ΔRON | 0.8 | Ω | -40°C to 85°C; VDD = 3V, ICOM = -32mA, VNO or VNC = 2.1V, Test Circuit 1 | 4 | ||
| On-Resistance Flatness | RONF | 0.95 | 2.1 | Ω | +25°C; VDD = 3.3V, ICOM = -32mA, VNO = 0.15V or VNC = 3.15V, Test Circuit 1 | 4 | |
| On-Resistance Flatness | RONF | 2.3 | Ω | -40°C to 85°C; VDD = 3.3V, ICOM = -32mA, VNO = 0.15V or VNC = 3.15V, Test Circuit 1 | 4 | ||
| NC/NO Channel-Off Leakage Current | IOFF (NO) or IOFF (NC) | -2 | 2 | μA | -40°C to 85°C; VDD=3.6V, VNO or VNC = 3V & VCOM = 1V or VNO or VNC = 1V & VCOM = 3V | 4 | |
| COM Channel-Off Leakage Current | IOFF (COM) | -2 | 2 | μA | -40°C to 85°C; VDD=3.6V, VNO or VNC = 3V & VCOM = 1V or VNO or VNC = 1V & VCOM = 3V | 4 | |
| NC/NO POWER-Off Leakage Current | IOFF (NO) or IOFF (NC) | -12 | 12 | μA | -40°C to 85°C; VDD=0V, VNO or VNC = 3.6V & VCOM = 0V or VNO or VNC = 0V & VCOM = 3.6V | 4 | |
| COM POWER-Off Leakage Current | IOFF (COM) | -12 | 12 | μA | -40°C to 85°C; VDD=0V, VNO or VNC = 3.6V & VCOM = 0V or VNO or VNC = 0V & VCOM = 3.6V | 4 | |
| Channel-On Leakage Current (NO/NC) | ION (NO) or ION (NC) | -7 | 7 | μA | -40°C to 85°C; VDD=3.6V, VNO or VNC = 3V & VCOM = open or VNO or VNC = 1V & VCOM = open | 4 | |
| Channel-On Leakage Current (COM) | ION (COM) | -7 | 7 | μA | -40°C to 85°C; VDD=3.6V, VNO or VNC = open & VCOM = 3V or VNO or VNC = open & VCOM = 1V | 4 | |
| Input Logic High | VIH | 0.8 | 3.6 | V | -40°C to 85°C | 5 | |
| Input Logic Low | VIL | 0 | 0.2 | V | -40°C to 85°C | 5 | |
| IN Input Leakage Current | IIN | -2.5 | 2.5 | μA | -40°C to 85°C; VDD = 3.6V, VIN=0 or 3.6V | 5 | |
| Turn-On Time | TON | 11.5 | 30 | ns | +25°C; VDD=3.3V, VCOM=VDD, RL=50Ohm, CL=35pF, Test Circuit 2 | 5 | |
| Turn-On Time | TON | 30 | ns | -40°C to 85°C; VDD=3V to 3.6V, VCOM=VDD, RL=50Ohm, CL=35pF, Test Circuit 2 | 5 | ||
| Turn-Off Time | TOFF | 7.6 | 30 | ns | +25°C; VDD=3.3V, VCOM=VDD, RL=50Ohm, CL=35pF, Test Circuit 2 | 5 | |
| Turn-Off Time | TOFF | 30 | ns | -40°C to 85°C; VDD=3V to 3.6V, VCOM=VDD, RL=50Ohm, CL=35pF, Test Circuit 2 | 5 | ||
| Break-Before-Make Delay | TD | 4 | 6.5 | 20 | ns | +25°C; VDD=3.3V, VNC=VNO=VDD, RL=50Ohm, CL=35pF, Test Circuit 3 | 5 |
| Break-Before-Make Delay | TD | 20 | ns | -40°C to 85°C; VDD=3V to 3.6V, VNC=VNO=VDD, RL=50Ohm, CL=35pF, Test Circuit 3 | 5 | ||
| Power Supply Current | ICC | 3 | μA | -40°C to 85°C; VDD=3.6V, VIN=0V or VDD, Switch ON or OFF | 5 | ||
| On-Resistance | RON | 7.1 | 14.4 | Ω | +25°C; VDD = 1.65V, ICOM = -32mA, 0 ≤ VNO or VNC ≤ VDD, Test Circuit 1 | 5 | |
| On-Resistance | RON | 16.3 | Ω | -40°C to 85°C; VDD = 1.65V, ICOM = -32mA, 0 ≤ VNO or VNC ≤ VDD, Test Circuit 1 | 5 | ||
| On-Resistance Match Between Channels | ΔRON | 0.3 | 1 | Ω | +25°C; VDD = 1.65V, ICOM = -32mA, VNO or VNC = 1.5V, Test Circuit 1 | 5 | |
| On-Resistance Match Between Channels | ΔRON | 1.2 | Ω | -40°C to 85°C; VDD = 1.65V, ICOM = -32mA, VNO or VNC = 1.5V, Test Circuit 1 | 5 | ||
| On-Resistance Flatness | RONF | 2.7 | 5.5 | Ω | +25°C; VDD = 1.65V, ICOM = -32mA, VNO = 0.15V or VNC = 1.5V, Test Circuit 1 | 5 | |
| On-Resistance Flatness | RONF | 7.3 | Ω | -40°C to 85°C; VDD = 1.65V, ICOM = -32mA, VNO = 0.15V or VNC = 1.5V, Test Circuit 1 | 5 | ||
| NO/NC Channel-Off Leakage Current | IOFF (NO) or IOFF (NC) | -0.9 | 0.9 | μA | -40°C to 85°C; VDD=1.95V, VNO or VNC = 1.65V & VCOM = 0.3V or VNO or VNC = 0.3V & VCOM = 1.65V | 5 | |
| COM Channel-Off Leakage Current | IOFF (COM) | -0.9 | 0.9 | μA | -40°C to 85°C; VDD=1.95V, VNO or VNC = 1.65V & VCOM = 0.3V or VNO or VNC = 0.3V & VCOM = 1.65V | 5 | |
| NC/NO POWER-Off Leakage Current | IOFF (NO) or IOFF (NC) | -5 | 5 | μA | -40°C to 85°C; VDD=0V, VNO or VNC = 1.95V & VCOM = 0V or VNO or VNC = 0V & VCOM = 1.95V | 6 | |
| COM POWER-Off Leakage Current | IOFF (COM) | -5 | 5 | μA | -40°C to 85°C; VDD=0V, VNO or VNC = 1.95V & VCOM = 0V or VNO or VNC = 0V & VCOM = 1.95V | 6 | |
| Channel-On Leakage Current (NO/NC) | ION (NO) or ION (NC) | -5.2 | 5.2 | μA | -40°C to 85°C; VDD=1.95V, VNO or VNC = 1.65V & VCOM = open or VNO or VNC = 0.3V & VCOM = open | 6 | |
| Channel-On Leakage Current (COM) | ION (COM) | -5.2 | 5.2 | μA | -40°C to 85°C; VDD=1.95V, VNO or VNC = open & VCOM = 1.65V or VNO or VNC = open & VCOM = 0.3V | 6 | |
| Input Logic High | VIH | 0.8 | 1.95 | V | -40°C to 85°C | 6 | |
| Input Logic Low | VIL | 0 | 0.2 | V | -40°C to 85°C | 6 | |
| IN Input Leakage Current | IIN | -2.1 | 2.1 | μA | -40°C to 85°C; VDD = 1.95V, VIN=0 or 1.95V | 6 | |
| Turn-On Time | TON | 18.9 | 45 | ns | +25°C; VDD=1.65V to 1.95V, VCOM=VDD, RL=50Ohm, CL=35pF, Test Circuit 2 | 6 | |
| Turn-On Time | TON | 45 | ns | -40°C to 85°C; VDD=1.65V to 1.95V, VCOM=VDD, RL=50Ohm, CL=35pF, Test Circuit 2 | 6 | ||
| Turn-Off Time | TOFF | 14 | 26 | ns | +25°C; VDD=1.65V to 1.95V, VCOM=VDD, RL=50Ohm, CL=35pF, Test Circuit 2 | 6 | |
| Turn-Off Time | TOFF | 26 | ns | -40°C to 85°C; VDD=1.65V to 1.95V, VCOM=VDD, RL=50Ohm, CL=35pF, Test Circuit 2 | 6 | ||
| Break-Before-Make Delay | TD | 5.3 | 11.8 | 40 | ns | +25°C; VDD=1.65V to 1.95V, VCOM=VDD, RL=50Ohm, CL=35pF, Test Circuit 3 | 6 |
| Break-Before-Make Delay | TD | 40 | ns | -40°C to 85°C; VDD=1.65V to 1.95V, VCOM=VDD, RL=50Ohm, CL=35pF, Test Circuit 3 | 6 | ||
| Power Supply Current | ICC | 1.5 | μA | -40°C to 85°C; VDD=1.95V, VIN=0V or VDD, Switch ON or OFF | 6 |
CAD (KiCad official)
- Symbol:
PI3A27518ZDEX - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm - 3D model: TQFN-24(4x4) (KiCad packages3D, STEP)
- 3D model files:
pi3a27518zdex-etched.step/pi3a27518zdex-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pi3a27518zdex.step/pi3a27518zdex.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (11 pp, sha256
4b281e860826464d, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PI3A27518ZDEX
**Diodes Incorporated** · Analog Switches, Multiplexers · TQFN-24(4x4)
PI3A27518ZDEX from Diodes Incorporated, in a TQFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COM1 | passive | Common signal path for channel 1, switched to NO1 or NC1 per the select truth table; analog signal range is 0 to VDD. |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | COM2 | passive | Common signal path for channel 2, switched to NO2 or NC2 per the select truth table; analog signal range is 0 to VDD. |
| 4 | COM3 | passive | Common signal path for channel 3, switched to NO3 or NC3 per the select truth table; analog signal range is 0 to VDD. |
| 5 | VDD | power_in | Positive power supply; operating voltage is 1.65V to 3.6V. |
| 6 | COM4 | passive | Common signal path for channel 4, switched to NO4 or NC4 per the select truth table; analog signal range is 0 to VDD. |
| 7 | COM5 | passive | Common signal path for channel 5, switched to NO5 or NC5 per the select truth table; analog signal range is 0 to VDD. |
| 8 | NO1 | passive | Normally open signal path for channel 1; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 9 | COM6 | passive | Common signal path for channel 6, switched to NO6 or NC6 per the select truth table; analog signal range is 0 to VDD. |
| 10 | NO2 | passive | Normally open data port for channel 2; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 11 | IN2 | input | Select input 2 that chooses the NO or NC path for channels 4-6 together with IN1; control input must be held HIGH or LOW and must not float, with logic levels up to VDD. |
| 12 | NO3 | passive | Normally open signal path for channel 3; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 13 | NO6 | passive | Normally open signal path for channel 6; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 14 | NO4 | passive | Normally open signal path for channel 4; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 15 | NO5 | passive | Normally open signal path for channel 5; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 16 | NC5 | unconnected | Normally closed signal path for channel 5; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 17 | EN | input | Enable input, active low; when driven HIGH all channels are OFF, and the control input must be held HIGH or LOW and must not float. |
| 18 | NC4 | unconnected | Normally closed signal path for channel 4; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 19 | NC6 | unconnected | Normally closed signal path for channel 6; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 20 | NC3 | unconnected | Normally closed signal path for channel 3; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 21 | IN1 | input | Select input 1 that chooses the NO or NC path for channels 1-3 together with IN2; control input must be held HIGH or LOW and must not float, with logic levels up to VDD. |
| 22 | NC2 | unconnected | Normally closed signal path for channel 2; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 23 | NC1 | unconnected | Normally closed signal path for channel 1; analog signal range is 0 to VDD and continuous current is limited to ±50mA. |
| 24 | N.C | unconnected | No connect; not internally bonded and left unconnected. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TQFN-24(4x4) |
| Category | Interface |
| Pins | 25 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage | VDD | 1.65 | | 3.6 | V | | 4 |
| Control Input Voltage | VIN | 0 | | | V | max = VDD | 4 |
| Switch Input Voltage | VINPUT | -0.3 | | | V | max = VDD | 4 |
| Operating Temperature | TA | -40 | 25 | 85 | °C | | 4 |
| Storage Temperature | | -65 | | 150 | °C | | 4 |
| Ambient Temperature with Power Applied | | -40 | | 85 | °C | | 4 |
| Supply Voltage | VDD | -0.5 | | 4.6 | V | | 4 |
| Control Input Voltage | VINx | 0 | | 4.6 | V | | 4 |
| DC Input Voltage | VINPUT | -0.5 | | 4.6 | V | | 4 |
| Continuous Current NO_NC_COM | | -50 | | 50 | mA | | 4 |
| ESD (HBM) | | | | 2.5 | kV | | 4 |
| ESD (CDM) | | | | 1.5 | kV | | 4 |
| Analog Signal Range | VNO, VNC, VCOM | 0 | | | V | -40°C to 85°C; max = VDD | 4 |
| On-Resistance | RON | | 4.4 | 5.2 | Ω | +25°C; VDD = 3V, ICOM = -32mA, 0 ≤ VNO or VNC ≤ VDD, Test Circuit 1 | 4 |
| On-Resistance | RON | | | 7.6 | Ω | -40°C to 85°C; VDD = 3V, ICOM = -32mA, 0 ≤ VNO or VNC ≤ VDD, Test Circuit 1 | 4 |
| On-Resistance Match Between Channels | ΔRON | | 0.3 | 0.7 | Ω | +25°C; VDD = 3V, ICOM = -32mA, VNO or VNC = 2.1V, Test Circuit 1 | 4 |
| On-Resistance Match Between Channels | ΔRON | | | 0.8 | Ω | -40°C to 85°C; VDD = 3V, ICOM = -32mA, VNO or VNC = 2.1V, Test Circuit 1 | 4 |
| On-Resistance Flatness | RONF | | 0.95 | 2.1 | Ω | +25°C; VDD = 3.3V, ICOM = -32mA, VNO = 0.15V or VNC = 3.15V, Test Circuit 1 | 4 |
| On-Resistance Flatness | RONF | | | 2.3 | Ω | -40°C to 85°C; VDD = 3.3V, ICOM = -32mA, VNO = 0.15V or VNC = 3.15V, Test Circuit 1 | 4 |
| NC/NO Channel-Off Leakage Current | IOFF (NO) or IOFF (NC) | -2 | | 2 | μA | -40°C to 85°C; VDD=3.6V, VNO or VNC = 3V & VCOM = 1V or VNO or VNC = 1V & VCOM = 3V | 4 |
| COM Channel-Off Leakage Current | IOFF (COM) | -2 | | 2 | μA | -40°C to 85°C; VDD=3.6V, VNO or VNC = 3V & VCOM = 1V or VNO or VNC = 1V & VCOM = 3V | 4 |
| NC/NO POWER-Off Leakage Current | IOFF (NO) or IOFF (NC) | -12 | | 12 | μA | -40°C to 85°C; VDD=0V, VNO or VNC = 3.6V & VCOM = 0V or VNO or VNC = 0V & VCOM = 3.6V | 4 |
| COM POWER-Off Leakage Current | IOFF (COM) | -12 | | 12 | μA | -40°C to 85°C; VDD=0V, VNO or VNC = 3.6V & VCOM = 0V or VNO or VNC = 0V & VCOM = 3.6V | 4 |
| Channel-On Leakage Current (NO/NC) | ION (NO) or ION (NC) | -7 | | 7 | μA | -40°C to 85°C; VDD=3.6V, VNO or VNC = 3V & VCOM = open or VNO or VNC = 1V & VCOM = open | 4 |
| Channel-On Leakage Current (COM) | ION (COM) | -7 | | 7 | μA | -40°C to 85°C; VDD=3.6V, VNO or VNC = open & VCOM = 3V or VNO or VNC = open & VCOM = 1V | 4 |
| Input Logic High | VIH | 0.8 | | 3.6 | V | -40°C to 85°C | 5 |
| Input Logic Low | VIL | 0 | | 0.2 | V | -40°C to 85°C | 5 |
| IN Input Leakage Current | IIN | -2.5 | | 2.5 | μA | -40°C to 85°C; VDD = 3.6V, VIN=0 or 3.6V | 5 |
| Turn-On Time | TON | | 11.5 | 30 | ns | +25°C; VDD=3.3V, VCOM=VDD, RL=50Ohm, CL=35pF, Test Circuit 2 | 5 |
| Turn-On Time | TON | | | 30 | ns | -40°C to 85°C; VDD=3V to 3.6V, VCOM=VDD, RL=50Ohm, CL=35pF, Test Circuit 2 | 5 |
| Turn-Off Time | TOFF | | 7.6 | 30 | ns | +25°C; VDD=3.3V, VCOM=VDD, RL=50Ohm, CL=35pF, Test Circuit 2 | 5 |
| Turn-Off Time | TOFF | | | 30 | ns | -40°C to 85°C; VDD=3V to 3.6V, VCOM=VDD, RL=50Ohm, CL=35pF, Test Circuit 2 | 5 |
| Break-Before-Make Delay | TD | 4 | 6.5 | 20 | ns | +25°C; VDD=3.3V, VNC=VNO=VDD, RL=50Ohm, CL=35pF, Test Circuit 3 | 5 |
| Break-Before-Make Delay | TD | | | 20 | ns | -40°C to 85°C; VDD=3V to 3.6V, VNC=VNO=VDD, RL=50Ohm, CL=35pF, Test Circuit 3 | 5 |
| Power Supply Current | ICC | | | 3 | μA | -40°C to 85°C; VDD=3.6V, VIN=0V or VDD, Switch ON or OFF | 5 |
| On-Resistance | RON | | 7.1 | 14.4 | Ω | +25°C; VDD = 1.65V, ICOM = -32mA, 0 ≤ VNO or VNC ≤ VDD, Test Circuit 1 | 5 |
| On-Resistance | RON | | | 16.3 | Ω | -40°C to 85°C; VDD = 1.65V, ICOM = -32mA, 0 ≤ VNO or VNC ≤ VDD, Test Circuit 1 | 5 |
| On-Resistance Match Between Channels | ΔRON | | 0.3 | 1 | Ω | +25°C; VDD = 1.65V, ICOM = -32mA, VNO or VNC = 1.5V, Test Circuit 1 | 5 |
| On-Resistance Match Between Channels | ΔRON | | | 1.2 | Ω | -40°C to 85°C; VDD = 1.65V, ICOM = -32mA, VNO or VNC = 1.5V, Test Circuit 1 | 5 |
| On-Resistance Flatness | RONF | | 2.7 | 5.5 | Ω | +25°C; VDD = 1.65V, ICOM = -32mA, VNO = 0.15V or VNC = 1.5V, Test Circuit 1 | 5 |
| On-Resistance Flatness | RONF | | | 7.3 | Ω | -40°C to 85°C; VDD = 1.65V, ICOM = -32mA, VNO = 0.15V or VNC = 1.5V, Test Circuit 1 | 5 |
| NO/NC Channel-Off Leakage Current | IOFF (NO) or IOFF (NC) | -0.9 | | 0.9 | μA | -40°C to 85°C; VDD=1.95V, VNO or VNC = 1.65V & VCOM = 0.3V or VNO or VNC = 0.3V & VCOM = 1.65V | 5 |
| COM Channel-Off Leakage Current | IOFF (COM) | -0.9 | | 0.9 | μA | -40°C to 85°C; VDD=1.95V, VNO or VNC = 1.65V & VCOM = 0.3V or VNO or VNC = 0.3V & VCOM = 1.65V | 5 |
| NC/NO POWER-Off Leakage Current | IOFF (NO) or IOFF (NC) | -5 | | 5 | μA | -40°C to 85°C; VDD=0V, VNO or VNC = 1.95V & VCOM = 0V or VNO or VNC = 0V & VCOM = 1.95V | 6 |
| COM POWER-Off Leakage Current | IOFF (COM) | -5 | | 5 | μA | -40°C to 85°C; VDD=0V, VNO or VNC = 1.95V & VCOM = 0V or VNO or VNC = 0V & VCOM = 1.95V | 6 |
| Channel-On Leakage Current (NO/NC) | ION (NO) or ION (NC) | -5.2 | | 5.2 | μA | -40°C to 85°C; VDD=1.95V, VNO or VNC = 1.65V & VCOM = open or VNO or VNC = 0.3V & VCOM = open | 6 |
| Channel-On Leakage Current (COM) | ION (COM) | -5.2 | | 5.2 | μA | -40°C to 85°C; VDD=1.95V, VNO or VNC = open & VCOM = 1.65V or VNO or VNC = open & VCOM = 0.3V | 6 |
| Input Logic High | VIH | 0.8 | | 1.95 | V | -40°C to 85°C | 6 |
| Input Logic Low | VIL | 0 | | 0.2 | V | -40°C to 85°C | 6 |
| IN Input Leakage Current | IIN | -2.1 | | 2.1 | μA | -40°C to 85°C; VDD = 1.95V, VIN=0 or 1.95V | 6 |
| Turn-On Time | TON | | 18.9 | 45 | ns | +25°C; VDD=1.65V to 1.95V, VCOM=VDD, RL=50Ohm, CL=35pF, Test Circuit 2 | 6 |
| Turn-On Time | TON | | | 45 | ns | -40°C to 85°C; VDD=1.65V to 1.95V, VCOM=VDD, RL=50Ohm, CL=35pF, Test Circuit 2 | 6 |
| Turn-Off Time | TOFF | | 14 | 26 | ns | +25°C; VDD=1.65V to 1.95V, VCOM=VDD, RL=50Ohm, CL=35pF, Test Circuit 2 | 6 |
| Turn-Off Time | TOFF | | | 26 | ns | -40°C to 85°C; VDD=1.65V to 1.95V, VCOM=VDD, RL=50Ohm, CL=35pF, Test Circuit 2 | 6 |
| Break-Before-Make Delay | TD | 5.3 | 11.8 | 40 | ns | +25°C; VDD=1.65V to 1.95V, VCOM=VDD, RL=50Ohm, CL=35pF, Test Circuit 3 | 6 |
| Break-Before-Make Delay | TD | | | 40 | ns | -40°C to 85°C; VDD=1.65V to 1.95V, VCOM=VDD, RL=50Ohm, CL=35pF, Test Circuit 3 | 6 |
| Power Supply Current | ICC | | | 1.5 | μA | -40°C to 85°C; VDD=1.95V, VIN=0V or VDD, Switch ON or OFF | 6 |
## CAD (KiCad official)
- Symbol: `PI3A27518ZDEX`
- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`
- 3D model: TQFN-24(4x4) (KiCad packages3D, STEP)
- 3D model files: `pi3a27518zdex-etched.step` / `pi3a27518zdex-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pi3a27518zdex.step` / `pi3a27518zdex.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590906267320213504) (11 pp, sha256 `4b281e860826464d`, retrieved 2026-10-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pi3a27518zdex-datasheet.pdf)