main
Ray
Publish 0.1.0
b3ea6dd
PH-14AW
HCTL · Wire To Board Connector · JST_PH_S14B-PH-K_1x14_P2.00mm_Horizontal
PH-14AW from HCTL, in a JST_PH_S14B-PH-K_1x14_P2.00mm_Horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
| 3 | 3 | passive | Contact 3; numbering follows the footprint. |
| 4 | 4 | passive | Contact 4; numbering follows the footprint. |
| 5 | 5 | passive | Contact 5; numbering follows the footprint. |
| 6 | 6 | passive | Contact 6; numbering follows the footprint. |
| 7 | 7 | passive | Contact 7; numbering follows the footprint. |
| 8 | 8 | passive | Contact 8; numbering follows the footprint. |
| 9 | 9 | passive | Contact 9; numbering follows the footprint. |
| 10 | 10 | passive | Contact 10; numbering follows the footprint. |
| 11 | 11 | passive | Contact 11; numbering follows the footprint. |
| 12 | 12 | passive | Contact 12; numbering follows the footprint. |
| 13 | 13 | passive | Contact 13; numbering follows the footprint. |
| 14 | 14 | passive | Contact 14; numbering follows the footprint. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HCTL |
| Package | JST_PH_S14B-PH-K_1x14_P2.00mm_Horizontal |
| Category | Connectors |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Contact resistance, initial value | 20 | mΩ | Max 20 mV and max 100 mA applied to mated connector; excludes wire resistance | 5 | |||
| Withstand voltage leakage current | 0.5 | mA | 800 V AC(rms) for 1 min to adjacent terminals and ground of mated connectors; no breakdown or flashover | 5 | |||
| Voltage rating | 100 | V | AC and DC rating | 20 | |||
| Current rating | 2 | A | AC and DC rating | 20 | |||
| Ambient operating temperature range | -40 | 105 | °C | Ambient temperature range | 20 | ||
| Temperature rise of contact | 30 | °C | Mated connector, maximum rated current passed through contact | 8 | |||
| Contact resistance after durability | 30 | mΩ | After 30 mating cycles, max 10 cycles/min, before environmental test | 7 | |||
| Current discontinuity during vibration | 1 | µsec | Vibration amplitude 1.5 mm p-p, 10-55-10 Hz, 2 h per axis | 7 | |||
| Contact resistance after vibration | 30 | mΩ | After vibration test, 1.5 mm p-p, 10-55-10 Hz, 2 h per axis | 7 | |||
| Contact resistance after thermal aging | 30 | mΩ | 85 ± 2 °C for 96 h continuously | 8 | |||
| Contact resistance after constant humidity | 30 | mΩ | Relative humidity 90-95 % for 96 h continuously | 9 | |||
| Contact resistance after temperature cycling | 30 | mΩ | 5 cycles of -40 ± 3 °C 30 min and 105 ± 3 °C 30 min | 9 | |||
| Insulation resistance after humidity and temperature cycling | 1000 | MΩ | After constant humidity and temperature cycling tests | 9 | |||
| Contact resistance after salt spray | 30 | mΩ | Salt spray: 35 ± 3 °C, 5 ± 1 % solution, 8 h after plating / 24 h before plating | 10 | |||
| Solder wetting area | 90 | % | Solderability test, solder temperature 260 ± 3 °C, immersion 3 ± 0.5 s | 10 |
CAD (KiCad official)
- Symbol:
PH-14AW - Footprint:
Connector_JST:JST_PH_S14B-PH-K_1x14_P2.00mm_Horizontal - 3D model: JST_PH_S14B-PH-K_1x14_P2.00mm_Horizontal (KiCad packages3D, STEP)
- 3D model files:
ph-14aw-etched.step/ph-14aw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ph-14aw.step/ph-14aw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HCTL datasheet (25 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primaryconnector numbering(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PH-14AW
**HCTL** · Wire To Board Connector · JST_PH_S14B-PH-K_1x14_P2.00mm_Horizontal
PH-14AW from HCTL, in a JST_PH_S14B-PH-K_1x14_P2.00mm_Horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
| 3 | 3 | passive | Contact 3; numbering follows the footprint. |
| 4 | 4 | passive | Contact 4; numbering follows the footprint. |
| 5 | 5 | passive | Contact 5; numbering follows the footprint. |
| 6 | 6 | passive | Contact 6; numbering follows the footprint. |
| 7 | 7 | passive | Contact 7; numbering follows the footprint. |
| 8 | 8 | passive | Contact 8; numbering follows the footprint. |
| 9 | 9 | passive | Contact 9; numbering follows the footprint. |
| 10 | 10 | passive | Contact 10; numbering follows the footprint. |
| 11 | 11 | passive | Contact 11; numbering follows the footprint. |
| 12 | 12 | passive | Contact 12; numbering follows the footprint. |
| 13 | 13 | passive | Contact 13; numbering follows the footprint. |
| 14 | 14 | passive | Contact 14; numbering follows the footprint. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HCTL |
| Package | JST_PH_S14B-PH-K_1x14_P2.00mm_Horizontal |
| Category | Connectors |
| Pins | 14 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Contact resistance, initial value | | | | 20 | mΩ | Max 20 mV and max 100 mA applied to mated connector; excludes wire resistance | 5 |
| Withstand voltage leakage current | | | | 0.5 | mA | 800 V AC(rms) for 1 min to adjacent terminals and ground of mated connectors; no breakdown or flashover | 5 |
| Voltage rating | | | | 100 | V | AC and DC rating | 20 |
| Current rating | | | | 2 | A | AC and DC rating | 20 |
| Ambient operating temperature range | | -40 | | 105 | °C | Ambient temperature range | 20 |
| Temperature rise of contact | | | | 30 | °C | Mated connector, maximum rated current passed through contact | 8 |
| Contact resistance after durability | | | | 30 | mΩ | After 30 mating cycles, max 10 cycles/min, before environmental test | 7 |
| Current discontinuity during vibration | | | | 1 | µsec | Vibration amplitude 1.5 mm p-p, 10-55-10 Hz, 2 h per axis | 7 |
| Contact resistance after vibration | | | | 30 | mΩ | After vibration test, 1.5 mm p-p, 10-55-10 Hz, 2 h per axis | 7 |
| Contact resistance after thermal aging | | | | 30 | mΩ | 85 ± 2 °C for 96 h continuously | 8 |
| Contact resistance after constant humidity | | | | 30 | mΩ | Relative humidity 90-95 % for 96 h continuously | 9 |
| Contact resistance after temperature cycling | | | | 30 | mΩ | 5 cycles of -40 ± 3 °C 30 min and 105 ± 3 °C 30 min | 9 |
| Insulation resistance after humidity and temperature cycling | | 1000 | | | MΩ | After constant humidity and temperature cycling tests | 9 |
| Contact resistance after salt spray | | | | 30 | mΩ | Salt spray: 35 ± 3 °C, 5 ± 1 % solution, 8 h after plating / 24 h before plating | 10 |
| Solder wetting area | | 90 | | | % | Solderability test, solder temperature 260 ± 3 °C, immersion 3 ± 0.5 s | 10 |
## CAD (KiCad official)
- Symbol: `PH-14AW`
- Footprint: `Connector_JST:JST_PH_S14B-PH-K_1x14_P2.00mm_Horizontal`
- 3D model: JST_PH_S14B-PH-K_1x14_P2.00mm_Horizontal (KiCad packages3D, STEP)
- 3D model files: `ph-14aw-etched.step` / `ph-14aw-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ph-14aw.step` / `ph-14aw.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HCTL datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757864106957520896) (25 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `connector numbering` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ph-14aw-datasheet.pdf)