main
Ray
Publish 0.1.0
ca6ce5b
PGA305ARHHR
Texas Instruments · ADC/DAC - Specialized · VQFN-36-EP(6x6)
PGA305ARHHR from Texas Instruments, in a VQFN-36-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NU | unconnected | Not used; make no external connection. |
| 2 | DVDD_MEM | power_out | Power supply output for the EEPROM and OTP. |
| 3 | DVDD | power_out | DVDD regulator output. |
| 4 | NU | unconnected | Not used; make no external connection. |
| 5 | PWR | power_in | Input power supply, 3.3 V to 30 V recommended operating range (absolute maximum -28 V to 33 V). |
| 6 | DACCAP | passive | DAC capacitor connection. |
| 7 | NU | unconnected | Not used; make no external connection. |
| 8 | OUT | output | DAC gained output (absolute maximum -0.3 V to 33 V). |
| 9 | AVDD | power_out | AVDD regulator output. |
| 10 | GND | power_in | Ground. |
| 11 | FB- | input | Feedback negative input for the output amplifier. |
| 12 | FB+ | input | Feedback positive input (absolute maximum -2 V to VPWR + 0.3 V). |
| 13 | COMP | input | Output amplifier compensation pin. |
| 14 | BRG- | output | Bridge drive, negative. |
| 15 | BRG+ | output | Bridge drive, positive. |
| 16 | REFCAP | passive | ADC reference capacitor connection. |
| 17 | INP- | input | Resistive sensor negative input (absolute maximum -0.3 V to 2 V). |
| 18 | INP+ | input | Resistive sensor positive input (absolute maximum -0.3 V to 2 V). |
| 19 | NU | unconnected | Not used; make no external connection. |
| 20 | NU | unconnected | Not used; make no external connection. |
| 21 | INT+ | input | External temperature sensor positive input (absolute maximum -0.3 V to 2 V). |
| 22 | INT- | input | External temperature sensor negative input (absolute maximum -0.3 V to 2 V). |
| 23 | AVSS | power_in | Analog ground. |
| 24 | NU | unconnected | Not used; make no external connection. |
| 25 | NU | unconnected | Not used; make no external connection. |
| 26 | NU | unconnected | Not used; make no external connection. |
| 27 | NU | unconnected | Not used; make no external connection. |
| 28 | NU | unconnected | Not used; make no external connection. |
| 29 | I2CADDR | input | I2C chip address select. |
| 30 | NU | unconnected | Not used; make no external connection. |
| 31 | NU | unconnected | Not used; make no external connection. |
| 32 | DVSS | power_in | Digital ground. |
| 33 | SDA | bidirectional | I2C data line. |
| 34 | NU | unconnected | Not used; make no external connection. |
| 35 | NU | unconnected | Not used; make no external connection. |
| 36 | SCL | bidirectional | I2C clock line. |
| 37 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-36-EP(6x6) |
| Category | Data Converters |
| Pins | 37 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| PWR supply voltage | VPWR | -28 | 33 | V | 5 | ||
| Voltage at sensor input pins INP+, INP-, INT+, INT- | -0.3 | 2 | V | 5 | |||
| Voltage at AVDD, AVSS, BRG+, BRG-, COMP, DACCAP, DVDD, DVDD_MEM, DVSS, FB-, GATE, REFCAP, SCL, SDA, I2CADDR | -0.3 | 3.6 | V | 5 | |||
| Voltage at FB+ pin | -2 | V | max is VPWR + 0.3 V | 5 | |||
| Voltage at OUT pin | -0.3 | 33 | V | 5 | |||
| Supply current, short on OUT pin | IPWR | 25 | mA | short on OUT pin | 5 | ||
| Maximum junction temperature | TJmax | 155 | °C | 5 | |||
| Storage temperature | Tstg | -40 | 150 | °C | 5 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | HBM per ANSI/ESDA/JEDEC JS-001 | 5 | |
| ESD CDM | V(ESD) | -500 | 500 | V | CDM per JESD22-C101 | 5 | |
| Power supply voltage | VPWR | 3.3 | 30 | V | over operating ambient temperature range | 5 | |
| Slew rate | 0.5 | V/µs | VDD = 0 to 30 V | 5 | |||
| Power supply current - normal operation | IPWR | 2.5 | mA | No load on BRG, no load on DAC | 5 | ||
| Power supply current - EEPROM programming | IPWR | 9 | mA | While EEPROM is being programmed, no load on BRG, no load on DAC | 5 | ||
| Operating ambient temperature | TA | -40 | 150 | °C | 5 | ||
| Programming temperature EEPROM | -40 | 140 | °C | 5 | |||
| Start-up time (including analog and digital) | 1 | ms | VPWR ramp rate 0.5 V/µs | 5 | |||
| Capacitor on PWR pin | 10 | nF | 5 | ||||
| Junction-to-ambient thermal resistance | RθJA | 30.6 | °C/W | RHH (VQFN) 36 pins | 6 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 16.4 | °C/W | 6 | |||
| Junction-to-board thermal resistance | RθJB | 5.4 | °C/W | 6 | |||
| Junction-to-top characterization parameter | ψJT | 0.2 | °C/W | 6 | |||
| Junction-to-board characterization parameter | ψJB | 5.4 | °C/W | 6 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 0.7 | °C/W | 6 | |||
| Reverse voltage | -28 | V | 6 | ||||
| Voltage drop across reverse voltage protection element | 20 | mV | 6 | ||||
| AVDD voltage | VAVDD | 3 | V | CAVDD = 100 nF | 6 | ||
| DVDD voltage - operating | VDVDD | 1.8 | V | CDVDD = 100 nF | 6 | ||
| Accurate reference voltage | 2.5 | V | 6 | ||||
| Bridge supply voltage | VBRG+, VBRG- | 2.5 | V | Bridge supply control bit = 0b00, no load | 6 | ||
| Current supply to the bridge | IBRG | 1.5 | mA | 6 | |||
| Temperature range (internal temperature sensor) | -40 | 150 | °C | 7 | |||
| ADC voltage input range (P) | -2.5 | 2.5 | V | 8 | |||
| INL P ADC | INL | -0.5 | 0.5 | LSB | 8 | ||
| ADC voltage input range (T) | -2.5 | 2.5 | V | 9 | |||
| INL T ADC | INL | -0.5 | 0.5 | LSB | 9 | ||
| Communication baud rate | 600 | 9600 | bps | 9 | |||
| SCL clock frequency | fSCL | 400 | 800 | KBPS | 9 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL = 3 mA, I2C RATE configuration bit = 0 | 9 | ||
| EEPROM erase-write cycles | 1000 | cycles | 10 | ||||
| EEPROM data retention | 10 | years | 10 | ||||
| EEPROM programming time | 8 | ms | 1 8-byte page | 10 | |||
| Start-up time | 9.6 | ms | No IIR filter, Vout step 0 to 2.5 V | 11 | |||
| Start-up time | 10.8 | ms | IIR filter = 320Hz, Vout step 0 to 2.5 V | 11 | |||
| Response time | 1700 | µs | No IIR filter, Vout step 0 to 2.5 V | 11 | |||
| START condition set-up time | tSTASU | 500 | ns | 13 | |||
| START condition hold time | tSTAHD | 500 | ns | 13 | |||
| SCL low time | tLOW | 1.25 | µs | 13 | |||
| SCL high time | tHIGH | 1.25 | µs | 13 | |||
| Data setup time | tDATSU | 500 | ns | 13 | |||
| Data hold time | tDATHD | 500 | ns | 13 | |||
| STOP condition set-up time | tSTOSU | 500 | ns | 13 |
CAD (KiCad official)
- Symbol:
PGA305ARHHR - Footprint:
Package_DFN_QFN:QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm - 3D model: VQFN-36-EP(6x6) (KiCad packages3D, STEP)
- 3D model files:
pga305arhhr-etched.step/pga305arhhr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pga305arhhr.step/pga305arhhr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (76 pp, sha256
5dd5d974d5aae65d, retrieved 2026-10-31, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PGA305ARHHR
**Texas Instruments** · ADC/DAC - Specialized · VQFN-36-EP(6x6)
PGA305ARHHR from Texas Instruments, in a VQFN-36-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NU | unconnected | Not used; make no external connection. |
| 2 | DVDD_MEM | power_out | Power supply output for the EEPROM and OTP. |
| 3 | DVDD | power_out | DVDD regulator output. |
| 4 | NU | unconnected | Not used; make no external connection. |
| 5 | PWR | power_in | Input power supply, 3.3 V to 30 V recommended operating range (absolute maximum -28 V to 33 V). |
| 6 | DACCAP | passive | DAC capacitor connection. |
| 7 | NU | unconnected | Not used; make no external connection. |
| 8 | OUT | output | DAC gained output (absolute maximum -0.3 V to 33 V). |
| 9 | AVDD | power_out | AVDD regulator output. |
| 10 | GND | power_in | Ground. |
| 11 | FB- | input | Feedback negative input for the output amplifier. |
| 12 | FB+ | input | Feedback positive input (absolute maximum -2 V to VPWR + 0.3 V). |
| 13 | COMP | input | Output amplifier compensation pin. |
| 14 | BRG- | output | Bridge drive, negative. |
| 15 | BRG+ | output | Bridge drive, positive. |
| 16 | REFCAP | passive | ADC reference capacitor connection. |
| 17 | INP- | input | Resistive sensor negative input (absolute maximum -0.3 V to 2 V). |
| 18 | INP+ | input | Resistive sensor positive input (absolute maximum -0.3 V to 2 V). |
| 19 | NU | unconnected | Not used; make no external connection. |
| 20 | NU | unconnected | Not used; make no external connection. |
| 21 | INT+ | input | External temperature sensor positive input (absolute maximum -0.3 V to 2 V). |
| 22 | INT- | input | External temperature sensor negative input (absolute maximum -0.3 V to 2 V). |
| 23 | AVSS | power_in | Analog ground. |
| 24 | NU | unconnected | Not used; make no external connection. |
| 25 | NU | unconnected | Not used; make no external connection. |
| 26 | NU | unconnected | Not used; make no external connection. |
| 27 | NU | unconnected | Not used; make no external connection. |
| 28 | NU | unconnected | Not used; make no external connection. |
| 29 | I2CADDR | input | I2C chip address select. |
| 30 | NU | unconnected | Not used; make no external connection. |
| 31 | NU | unconnected | Not used; make no external connection. |
| 32 | DVSS | power_in | Digital ground. |
| 33 | SDA | bidirectional | I2C data line. |
| 34 | NU | unconnected | Not used; make no external connection. |
| 35 | NU | unconnected | Not used; make no external connection. |
| 36 | SCL | bidirectional | I2C clock line. |
| 37 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-36-EP(6x6) |
| Category | Data Converters |
| Pins | 37 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| PWR supply voltage | VPWR | -28 | | 33 | V | | 5 |
| Voltage at sensor input pins INP+, INP-, INT+, INT- | | -0.3 | | 2 | V | | 5 |
| Voltage at AVDD, AVSS, BRG+, BRG-, COMP, DACCAP, DVDD, DVDD_MEM, DVSS, FB-, GATE, REFCAP, SCL, SDA, I2CADDR | | -0.3 | | 3.6 | V | | 5 |
| Voltage at FB+ pin | | -2 | | | V | max is VPWR + 0.3 V | 5 |
| Voltage at OUT pin | | -0.3 | | 33 | V | | 5 |
| Supply current, short on OUT pin | IPWR | | | 25 | mA | short on OUT pin | 5 |
| Maximum junction temperature | TJmax | | | 155 | °C | | 5 |
| Storage temperature | Tstg | -40 | | 150 | °C | | 5 |
| ESD HBM | V(ESD) | -2000 | | 2000 | V | HBM per ANSI/ESDA/JEDEC JS-001 | 5 |
| ESD CDM | V(ESD) | -500 | | 500 | V | CDM per JESD22-C101 | 5 |
| Power supply voltage | VPWR | 3.3 | | 30 | V | over operating ambient temperature range | 5 |
| Slew rate | | | | 0.5 | V/µs | VDD = 0 to 30 V | 5 |
| Power supply current - normal operation | IPWR | | | 2.5 | mA | No load on BRG, no load on DAC | 5 |
| Power supply current - EEPROM programming | IPWR | | | 9 | mA | While EEPROM is being programmed, no load on BRG, no load on DAC | 5 |
| Operating ambient temperature | TA | -40 | | 150 | °C | | 5 |
| Programming temperature EEPROM | | -40 | | 140 | °C | | 5 |
| Start-up time (including analog and digital) | | | | 1 | ms | VPWR ramp rate 0.5 V/µs | 5 |
| Capacitor on PWR pin | | 10 | | | nF | | 5 |
| Junction-to-ambient thermal resistance | RθJA | | 30.6 | | °C/W | RHH (VQFN) 36 pins | 6 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 16.4 | | °C/W | | 6 |
| Junction-to-board thermal resistance | RθJB | | 5.4 | | °C/W | | 6 |
| Junction-to-top characterization parameter | ψJT | | 0.2 | | °C/W | | 6 |
| Junction-to-board characterization parameter | ψJB | | 5.4 | | °C/W | | 6 |
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | | 0.7 | | °C/W | | 6 |
| Reverse voltage | | -28 | | | V | | 6 |
| Voltage drop across reverse voltage protection element | | | | 20 | mV | | 6 |
| AVDD voltage | VAVDD | | 3 | | V | CAVDD = 100 nF | 6 |
| DVDD voltage - operating | VDVDD | | 1.8 | | V | CDVDD = 100 nF | 6 |
| Accurate reference voltage | | | 2.5 | | V | | 6 |
| Bridge supply voltage | VBRG+, VBRG- | | 2.5 | | V | Bridge supply control bit = 0b00, no load | 6 |
| Current supply to the bridge | IBRG | | | 1.5 | mA | | 6 |
| Temperature range (internal temperature sensor) | | -40 | | 150 | °C | | 7 |
| ADC voltage input range (P) | | -2.5 | | 2.5 | V | | 8 |
| INL P ADC | INL | -0.5 | | 0.5 | LSB | | 8 |
| ADC voltage input range (T) | | -2.5 | | 2.5 | V | | 9 |
| INL T ADC | INL | -0.5 | | 0.5 | LSB | | 9 |
| Communication baud rate | | 600 | | 9600 | bps | | 9 |
| SCL clock frequency | fSCL | | 400 | 800 | KBPS | | 9 |
| Low-level output voltage | VOL | | | 0.4 | V | IOL = 3 mA, I2C RATE configuration bit = 0 | 9 |
| EEPROM erase-write cycles | | 1000 | | | cycles | | 10 |
| EEPROM data retention | | 10 | | | years | | 10 |
| EEPROM programming time | | | | 8 | ms | 1 8-byte page | 10 |
| Start-up time | | | | 9.6 | ms | No IIR filter, Vout step 0 to 2.5 V | 11 |
| Start-up time | | | | 10.8 | ms | IIR filter = 320Hz, Vout step 0 to 2.5 V | 11 |
| Response time | | | | 1700 | µs | No IIR filter, Vout step 0 to 2.5 V | 11 |
| START condition set-up time | tSTASU | 500 | | | ns | | 13 |
| START condition hold time | tSTAHD | 500 | | | ns | | 13 |
| SCL low time | tLOW | 1.25 | | | µs | | 13 |
| SCL high time | tHIGH | 1.25 | | | µs | | 13 |
| Data setup time | tDATSU | 500 | | | ns | | 13 |
| Data hold time | tDATHD | 500 | | | ns | | 13 |
| STOP condition set-up time | tSTOSU | 500 | | | ns | | 13 |
## CAD (KiCad official)
- Symbol: `PGA305ARHHR`
- Footprint: `Package_DFN_QFN:QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm`
- 3D model: VQFN-36-EP(6x6) (KiCad packages3D, STEP)
- 3D model files: `pga305arhhr-etched.step` / `pga305arhhr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pga305arhhr.step` / `pga305arhhr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/pga305arhhr.pdf) (76 pp, sha256 `5dd5d974d5aae65d`, retrieved 2026-10-31, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pga305arhhr-datasheet.pdf)