main
Ray pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) cef6dfa
{
 "schema": "adom.pads/1",
 "slug": "pga281aipwr",
 "footprint": "TSSOP-16_4.4x5mm_P0.65mm",
 "generated_from": {
  "footprint": "TSSOP-16_4.4x5mm_P0.65mm@sha256:fbac79fc5f310754",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.8625,
   -2.275
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "TSSOP-16_4.4x5mm_P0.65mm@sha256:fbac79fc5f310754"
 },
 "pad_count": 16,
 "symbol_pins": [
  "1",
  "10",
  "11",
  "12",
  "13",
  "14",
  "15",
  "16",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -2.275
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "DVDD",
   "type": "power_in",
   "description": "Digital supply input (2.7 V to 5.5 V). Powers the internal digital interface (G0-G4 gain-select logic and the EF error-flag driver). Referenced to VSON.",
   "is_pin1": true,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -1.625
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "EF",
   "type": "output",
   "description": "Error-flag output. Driven high (DVDD - 0.5 V) when an overload/alarm condition is detected on the input or output stages, and low (<= 0.7 V) when the device is operating in-range. Alarm-to-disable response ~30 us, alarm recovery ~5 us.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -0.975
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "G4",
   "type": "input",
   "description": "Gain-select digital input, bit 4. Combined with G3:G0 selects the internal gain per Table 1 (G4 chooses between the 1 V/V and 1.375 V/V output-scale families). Logic thresholds referenced to DVDD; input current ~0.2 uA.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -0.325
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "G3",
   "type": "input",
   "description": "Gain-select digital input, bit 3 (MSB of the binary input-gain code G3:G0). Selects input-stage gain from 1/8 V/V to 128 V/V per Table 1. Logic thresholds referenced to DVDD.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    0.325
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "G2",
   "type": "input",
   "description": "Gain-select digital input, bit 2 of the binary input-gain code G3:G0. Logic thresholds referenced to DVDD; input current ~0.2 uA.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    0.975
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "G1",
   "type": "input",
   "description": "Gain-select digital input, bit 1 of the binary input-gain code G3:G0. Logic thresholds referenced to DVDD; input current ~0.2 uA.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    1.625
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "G0",
   "type": "input",
   "description": "Gain-select digital input, LSB of the binary input-gain code G3:G0. Logic thresholds referenced to DVDD; input current ~0.2 uA.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    2.275
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "VON",
   "type": "output",
   "description": "Inverting signal output of the fully differential output stage. Swings rail-to-rail between VSON and VSOP (typ. within 40 mV of the rail at 2 mA load). Output resistance ~200 mOhm; drives up to 500 pF.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    2.275
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "9",
   "name": "VOP",
   "type": "output",
   "description": "Noninverting signal output of the fully differential output stage. Swings rail-to-rail between VSON and VSOP; short-circuit current ~15 mA (typ) to VSOP/2. Complement of VON.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "10",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    1.625
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "10",
   "name": "VOCM",
   "type": "input",
   "description": "Output common-mode voltage set input. Sets the common-mode level of the VOP/VON differential output pair. Valid range (VSON + 0.1 V) to (VSOP - 0.1 V); high-Z input (~1 GOhm), bias current typ. 3 nA. Typically tied to VSOP/2.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "11",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    0.975
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "11",
   "name": "VSOP",
   "type": "power_in",
   "description": "Positive output-stage low-voltage supply (2.7 V to 5.5 V). Sets the positive rail of the VOP/VON differential outputs so they can interface directly to a low-voltage ADC. Referenced to VSON.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "12",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    0.325
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "12",
   "name": "VSON",
   "type": "power_in",
   "description": "Negative output-stage low-voltage supply and negative digital supply (system ground / 0 V reference for the output and digital domains). VSOP - VSON must remain <= 6 V; also serves as the DVDD return.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "13",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -0.325
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "13",
   "name": "VSP",
   "type": "power_in",
   "description": "Positive high-voltage analog supply for the input amplifier stage. Operating range +5 V to +19 V (VSP - VSN specified 10 V to 36 V, operating up to 38 V). Bypass locally to VSN.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "14",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -0.975
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "14",
   "name": "INP",
   "type": "input",
   "description": "Noninverting signal input to the instrumentation amplifier. Very high input impedance (>1 GOhm, ~12 pF single-ended); valid input range (VSN + 2.5 V) to (VSP - 2.5 V). Diode-clamped to the high-voltage supplies.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "15",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -1.625
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "15",
   "name": "INN",
   "type": "input",
   "description": "Inverting signal input to the instrumentation amplifier. Matches INP: >1 GOhm input impedance, valid range (VSN + 2.5 V) to (VSP - 2.5 V), diode-clamped to VSP/VSN; limit external current to <= +/-10 mA on signal-input pins.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "16",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -2.275
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "16",
   "name": "VSN",
   "type": "power_in",
   "description": "Negative high-voltage analog supply for the input amplifier stage. Operating range -5 V to -19 V; VSP - VSN absolute max 40 V. Bypass locally to VSP.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}