Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PGA2311U

Texas Instruments · Audio Amplifiers · SOIC-16W (DW)

PGA2311U from Texas Instruments, in a SOIC-16W (DW). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 ZCEN input Zero-crossing enable input (active high); enables gain transitions at zero-crossings with 16 ms timeout
2 CS input Chip-select input (active low); data written when CS is LOW for 16-bit transfer
3 SDI input Serial data input; 16-bit control word (8 bits per channel, MSB first, 0.5 dB step resolution)
4 VD+ power_in Digital power supply +5 V nominal (4.75 V to 5.25 V operating range)
5 DGND power_in Digital ground reference
6 SCLK input Serial clock input; data latched on rising edge (0 to 6.25 MHz maximum)
7 SDO tri_state Serial data output; tri-state when CS HIGH, used for daisy-chaining multiple devices
8 MUTE input Mute control input (active low); disconnects output amplifier with 10 kΩ to ground termination
9 VINR input Analog input right channel; referenced to AGNDR with 2.5 Vrms maximum without clipping
10 AGNDR power_in Analog ground right channel
11 VOUTR output Analog output right channel; maximum swing within ±1.25 V of analog supply rails
12 VA+ power_in Analog power supply +5 V nominal (4.75 V to 5.25 V operating range)
13 VA- power_in Analog power supply -5 V nominal (-4.75 V to -5.25 V operating range)
14 VOUTL output Analog output left channel; maximum swing within ±1.25 V of analog supply rails
15 AGNDL power_in Analog ground left channel
16 VINL input Analog input left channel; referenced to AGNDL with 2.5 Vrms maximum without clipping

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16W (DW)
Category Amplifiers/Comparators
Pins 16

CAD (Adom-generated)

  • Symbol: PGA2311U
  • Footprint: Adom_Gen:Texas_Instruments_DW0016A
  • 3D model: generated to fit the land (STEP)
  • 3D model files: pga2311u-etched.step / pga2311u-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pga2311u.step / pga2311u.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (27 pp, sha256 17b42f9e9b169986, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: DW0016A 4220721/A land pattern, SBOS218D p.24: 2.0 x 0.6 mm pads, pitch 1.27 mm, pad rows 9.3 mm centre-to-centre. Body from the outline p.23: 10.5/10.1 x 7.6/7.4 body, 10.63/9.97 across the leads, 2.65 MAX, 0.3/0.1 standoff, 16X 0.51/0.31 leads, 14X 1.27 pitch. Shared land Adom_Gen:Texas_Instruments_DW0016A (TI DW0016A EXAMPLE BOARD LAYOUT 4220721/A, CD4050B SCHS046 p.29 (DW0016B 4221009/B ISO1042 ZHCSI90F p.33, DWE0016A 4223098/A AMC3302 p.38, DVE0016A 4224275 UCC12040 p.34 print the same IPC-7351 NOMINAL land and the same PACKAGE OUTLINE)). FAMLAND (task master 2026-11-21: REGATE wrong-land families; the maker's printed land; DW HV ruling; SOIC-W waves GO, FAMWAVES). the sheet's HV / ISOLATION OPTION land (1.65 x 0.6 at 9.75) is not used: task master ruling 2026-11-21, the HV land goes only to parts whose own sheet states isolation ratings and prints it; standard land (not an isolation part).

Datasheet PDF