3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPESD2ETH100-TR
Nexperia · ESD Protection Devices · SOT-23
PESD2ETH100-TR from Nexperia, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | K1 | passive | Cathode of the first protection diode (signal line 1), protected against ESD up to 30 kV (IEC 61000-4-2) measured from pin 1 to pin 3, with VRWM of 24 V max. |
| 2 | K2 | passive | Cathode of the second protection diode (signal line 2), protected against ESD up to 30 kV (IEC 61000-4-2) measured from pin 2 to pin 3, with VRWM of 24 V max. |
| 3 | CC | passive | Common cathode of both protection diodes, the reference terminal against which ESD ratings from pin 1 or 2 are measured. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | SOT-23 |
| Category | TVS/Fuse/Board Level Protection |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Trigger voltage | Vt1 | 100 | 130 | V | tp = 100 ns; Tamb = 25 °C | 4 | |
| Holding voltage | Vh | 28 | V | 4 | |||
| Reverse standoff voltage | VRWM | 24 | V | Tamb = 25 °C | 4 | ||
| Reverse leakage current | IRM | 1 | 100 | nA | VRWM = 24 V; VR = 0 V; Tamb = 25 °C | 4 | |
| Diode capacitance | Cd | 2.5 | 3 | pF | f = 1 MHz; VR = 0 V; Tamb = 25 °C | 4 | |
| Rated peak pulse current | IPPM | 3.2 | A | tp = 8/20 µs | 3 | ||
| Junction temperature | Tj | 150 | °C | 3 | |||
| Ambient temperature | Tamb | -55 | 150 | °C | 3 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Electrostatic discharge voltage | VESD | 30 | kV | IEC 61000-4-2; contact discharge; pin 1 or 2 to pin 3 | 3 | ||
| Electrostatic discharge voltage (OPEN Alliance) | VESD | 30 | kV | 1000 contact discharges (IEC 61000-4-2); OPEN Alliance specification; pin 1 or 2 to pin 3 | 3 | ||
| Diode capacitance matching | ΔCd/Cd | 0.5 | % | f = 1 MHz; VR = 2.5 V; Tamb = 25 °C | 4 | ||
| Dynamic resistance | Rdyn | 0.44 | Ω | IR = 70 A; tp = 100 ns; Tamb = 25 °C | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
PESD2ETH100-TR - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
pesd2eth100-etched.step/pesd2eth100-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pesd2eth100.step/pesd2eth100.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (14 pp, sha256
f5c81131adf313ab, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).