component
PDZ3.6BGWJ
Public Made by Adomby adom
Nexperia Zener Diodes, SOD-123. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
PDZ3.6BGWJ
Nexperia · Zener Diodes · SOD-123
PDZ3.6BGWJ from Nexperia, in a SOD-123. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | K | passive | Cathode of the Zener diode; the marking bar on the package indicates the cathode. |
| 2 | A | passive | Anode of the Zener diode; the datasheet gives no further limits or functions for this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | SOD-123 |
| Category | Diodes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Working voltage (3.6 B, nominal 3.6 V) | VZ | 3.6 | 3.85 | V | IZ = 5 mA | 4 | |
| Tolerance series B2 | -2 | 2 | % | approximately ±2 % (B2 tolerance series) | 2 | ||
| Maximum differential resistance | rdif | 500 | Ω | IZ = 1 mA (printed as '500 @ 1 mA') | 4 | ||
| Maximum differential resistance | rdif | 90 | Ω | IZ = 5 mA | 4 | ||
| Reverse current | IR | 5 | μA | VR = 1.0 V | 4 | ||
| Non-repetitive peak reverse current | IZSM | 8 | A | tp = 100 μs; Tamb = 25 °C | 4 | ||
| Diode capacitance | Cd | 390 | pF | f = 1 MHz; VR = 0 V | 4 | ||
| Temperature coefficient | SZ | -2.4 | mV/K | IZ = 5 mA | 4 | ||
| Forward voltage | VF | 0.9 | V | IF = 10 mA | 3 | ||
| Forward voltage | VF | 1.1 | V | IF = 100 mA | 3 | ||
| Forward current | IF | 200 | mA | 3 | |||
| Non-repetitive peak power dissipation | PZSM | 40 | W | tp = 100 μs; square wave; Tj = 25 °C prior to surge | 3 | ||
| Total power dissipation | Ptot | 365 | mW | Tamb ≤ 25 °C; FR4 PCB, standard footprint | 3 | ||
| Total power dissipation | Ptot | 625 | mW | FR4 PCB, mounting pad for cathode 1 cm² | 3 | ||
| Junction temperature | Tj | 150 | °C | 3 | |||
| Ambient temperature | Tamb | -55 | 150 | °C | 3 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Thermal resistance junction to ambient | Rth(j-a) | 340 | K/W | free air; FR4 PCB, standard footprint | 3 | ||
| Thermal resistance junction to ambient | Rth(j-a) | 200 | K/W | FR4 PCB, mounting pad for cathode 1 cm² | 3 | ||
| Thermal resistance junction to solder point | Rth(j-sp) | 50 | K/W | soldering point of cathode tab | 3 |
CAD (KiCad official)
- Symbol:
PDZ3.6BGWJ - Footprint:
Diode_SMD:D_SOD-123F - 3D model: SOD-123 (KiCad packages3D, STEP)
- 3D model files:
pdz3-6bgwj-etched.step/pdz3-6bgwj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pdz3-6bgwj.step/pdz3-6bgwj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (12 pp, sha256
b02f2b4d94446a46, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PDZ3.6BGWJ
**Nexperia** · Zener Diodes · SOD-123
PDZ3.6BGWJ from Nexperia, in a SOD-123. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | K | passive | Cathode of the Zener diode; the marking bar on the package indicates the cathode. |
| 2 | A | passive | Anode of the Zener diode; the datasheet gives no further limits or functions for this pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | SOD-123 |
| Category | Diodes |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Working voltage (3.6 B, nominal 3.6 V) | VZ | 3.6 | | 3.85 | V | IZ = 5 mA | 4 |
| Tolerance series B2 | | -2 | | 2 | % | approximately ±2 % (B2 tolerance series) | 2 |
| Maximum differential resistance | rdif | | | 500 | Ω | IZ = 1 mA (printed as '500 @ 1 mA') | 4 |
| Maximum differential resistance | rdif | | | 90 | Ω | IZ = 5 mA | 4 |
| Reverse current | IR | | | 5 | μA | VR = 1.0 V | 4 |
| Non-repetitive peak reverse current | IZSM | | | 8 | A | tp = 100 μs; Tamb = 25 °C | 4 |
| Diode capacitance | Cd | | 390 | | pF | f = 1 MHz; VR = 0 V | 4 |
| Temperature coefficient | SZ | | -2.4 | | mV/K | IZ = 5 mA | 4 |
| Forward voltage | VF | | | 0.9 | V | IF = 10 mA | 3 |
| Forward voltage | VF | | | 1.1 | V | IF = 100 mA | 3 |
| Forward current | IF | | | 200 | mA | | 3 |
| Non-repetitive peak power dissipation | PZSM | | | 40 | W | tp = 100 μs; square wave; Tj = 25 °C prior to surge | 3 |
| Total power dissipation | Ptot | | | 365 | mW | Tamb ≤ 25 °C; FR4 PCB, standard footprint | 3 |
| Total power dissipation | Ptot | | | 625 | mW | FR4 PCB, mounting pad for cathode 1 cm² | 3 |
| Junction temperature | Tj | | | 150 | °C | | 3 |
| Ambient temperature | Tamb | -55 | | 150 | °C | | 3 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 3 |
| Thermal resistance junction to ambient | Rth(j-a) | | | 340 | K/W | free air; FR4 PCB, standard footprint | 3 |
| Thermal resistance junction to ambient | Rth(j-a) | | | 200 | K/W | FR4 PCB, mounting pad for cathode 1 cm² | 3 |
| Thermal resistance junction to solder point | Rth(j-sp) | | | 50 | K/W | soldering point of cathode tab | 3 |
## CAD (KiCad official)
- Symbol: `PDZ3.6BGWJ`
- Footprint: `Diode_SMD:D_SOD-123F`
- 3D model: SOD-123 (KiCad packages3D, STEP)
- 3D model files: `pdz3-6bgwj-etched.step` / `pdz3-6bgwj-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pdz3-6bgwj.step` / `pdz3-6bgwj.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Nexperia datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588914381157097472) (12 pp, sha256 `b02f2b4d94446a46`, retrieved 2026-10-20, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pdz3-6bgwj-datasheet.pdf)