main
Ray
Publish 0.1.0
b3b47d8
PDTA114YU
Nexperia · Digital Transistors · SOT-323-3
PDTA114YU from Nexperia, in a SOT-323-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | I | input | Input (base) of the PNP resistor-equipped transistor, connected through built-in bias resistor R1 (10 kΩ typ, 7 to 13 kΩ) with an input voltage range of -40 V to 6 V. |
| 2 | G | power_in | GND (emitter) of the transistor, with the built-in bias resistor R2 (R2/R1 ratio 3.7 to 5.7) connected between input and this pin; VEBO is limited to -6 V. |
| 3 | O | passive | Output (collector) of the transistor, rated for VCEO of -50 V (open base) and an output current IO of up to -100 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | SOT-323-3 |
| Category | Transistors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| collector-base voltage | VCBO | -50 | V | open emitter | 2 | ||
| collector-emitter voltage | VCEO | -50 | V | open base | 2 | ||
| emitter-base voltage | VEBO | -6 | V | open collector | 2 | ||
| input voltage | VI | -40 | 6 | V | 2 | ||
| output current | IO | -100 | mA | 2 | |||
| total power dissipation | Ptot | 200 | mW | Tamb ≤ 25 °C; device mounted on FR4 PCB, single-sided copper, tin-plated and standard footprint | 2 | ||
| junction temperature | Tj | 150 | °C | 2 | |||
| ambient temperature | Tamb | -65 | 150 | °C | 2 | ||
| storage temperature | Tstg | -65 | 150 | °C | 2 | ||
| thermal resistance from junction to ambient | Rth(j-a) | 625 | K/W | Tamb ≤ 25 °C; device mounted on FR4 PCB, single-sided copper, tin-plated and standard footprint | 3 | ||
| collector-base cut-off current | ICBO | -100 | nA | VCB = -50 V; IE = 0 A; Tamb = 25 °C | 4 | ||
| collector-emitter cut-off current | ICEO | -100 | nA | VCE = -30 V; IB = 0 A; Tamb = 25 °C | 4 | ||
| collector-emitter cut-off current | ICEO | -5 | µA | VCE = -30 V; IB = 0 A; Tj = 150 °C | 4 | ||
| emitter-base cut-off current | IEBO | -150 | µA | VEB = -5 V; IC = 0 A; Tamb = 25 °C | 4 | ||
| DC current gain | hFE | 100 | VCE = -5 V; IC = -5 mA; Tamb = 25 °C | 4 | |||
| collector-emitter saturation voltage | VCEsat | -100 | mV | IC = -5 mA; IB = -0.25 mA; Tamb = 25 °C | 4 | ||
| off-state input voltage | VI(off) | -0.7 | -0.5 | V | VCE = -5 V; IC = -100 µA; Tamb = 25 °C | 4 | |
| on-state input voltage | VI(on) | -1.4 | -0.8 | V | VCE = -0.3 V; IC = -1 mA; Tamb = 25 °C | 4 | |
| bias resistor 1 (input) | R1 | 7 | 10 | 13 | kΩ | 4 | |
| bias resistor ratio R2/R1 | R2/R1 | 3.7 | 4.7 | 5.7 | Tamb = 25 °C | 4 | |
| collector capacitance | Cc | 3 | pF | VCB = -10 V; IE = 0 A; ie = 0 A; f = 1 MHz; Tamb = 25 °C | 4 | ||
| transition frequency | fT | 180 | MHz | VCE = -5 V; IC = -10 mA; f = 100 MHz; Tamb = 25 °C | 4 |
CAD (KiCad official)
- Symbol:
PDTA114YU - Footprint:
Package_TO_SOT_SMD:SOT-323_SC-70 - 3D model: SOT-323-3 (KiCad packages3D, STEP)
- 3D model files:
pdta114yu-etched.step/pdta114yu-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pdta114yu.step/pdta114yu.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (9 pp, sha256
94e33ddd494a6e75, retrieved 2026-11-09, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PDTA114YU
**Nexperia** · Digital Transistors · SOT-323-3
PDTA114YU from Nexperia, in a SOT-323-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | I | input | Input (base) of the PNP resistor-equipped transistor, connected through built-in bias resistor R1 (10 kΩ typ, 7 to 13 kΩ) with an input voltage range of -40 V to 6 V. |
| 2 | G | power_in | GND (emitter) of the transistor, with the built-in bias resistor R2 (R2/R1 ratio 3.7 to 5.7) connected between input and this pin; VEBO is limited to -6 V. |
| 3 | O | passive | Output (collector) of the transistor, rated for VCEO of -50 V (open base) and an output current IO of up to -100 mA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | SOT-323-3 |
| Category | Transistors |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| collector-base voltage | VCBO | | | -50 | V | open emitter | 2 |
| collector-emitter voltage | VCEO | | | -50 | V | open base | 2 |
| emitter-base voltage | VEBO | | | -6 | V | open collector | 2 |
| input voltage | VI | -40 | | 6 | V | | 2 |
| output current | IO | | | -100 | mA | | 2 |
| total power dissipation | Ptot | | | 200 | mW | Tamb ≤ 25 °C; device mounted on FR4 PCB, single-sided copper, tin-plated and standard footprint | 2 |
| junction temperature | Tj | | | 150 | °C | | 2 |
| ambient temperature | Tamb | -65 | | 150 | °C | | 2 |
| storage temperature | Tstg | -65 | | 150 | °C | | 2 |
| thermal resistance from junction to ambient | Rth(j-a) | | | 625 | K/W | Tamb ≤ 25 °C; device mounted on FR4 PCB, single-sided copper, tin-plated and standard footprint | 3 |
| collector-base cut-off current | ICBO | | | -100 | nA | VCB = -50 V; IE = 0 A; Tamb = 25 °C | 4 |
| collector-emitter cut-off current | ICEO | | | -100 | nA | VCE = -30 V; IB = 0 A; Tamb = 25 °C | 4 |
| collector-emitter cut-off current | ICEO | | | -5 | µA | VCE = -30 V; IB = 0 A; Tj = 150 °C | 4 |
| emitter-base cut-off current | IEBO | | | -150 | µA | VEB = -5 V; IC = 0 A; Tamb = 25 °C | 4 |
| DC current gain | hFE | 100 | | | | VCE = -5 V; IC = -5 mA; Tamb = 25 °C | 4 |
| collector-emitter saturation voltage | VCEsat | | | -100 | mV | IC = -5 mA; IB = -0.25 mA; Tamb = 25 °C | 4 |
| off-state input voltage | VI(off) | | -0.7 | -0.5 | V | VCE = -5 V; IC = -100 µA; Tamb = 25 °C | 4 |
| on-state input voltage | VI(on) | -1.4 | | -0.8 | V | VCE = -0.3 V; IC = -1 mA; Tamb = 25 °C | 4 |
| bias resistor 1 (input) | R1 | 7 | 10 | 13 | kΩ | | 4 |
| bias resistor ratio R2/R1 | R2/R1 | 3.7 | 4.7 | 5.7 | | Tamb = 25 °C | 4 |
| collector capacitance | Cc | | | 3 | pF | VCB = -10 V; IE = 0 A; ie = 0 A; f = 1 MHz; Tamb = 25 °C | 4 |
| transition frequency | fT | | 180 | | MHz | VCE = -5 V; IC = -10 mA; f = 100 MHz; Tamb = 25 °C | 4 |
## CAD (KiCad official)
- Symbol: `PDTA114YU`
- Footprint: `Package_TO_SOT_SMD:SOT-323_SC-70`
- 3D model: SOT-323-3 (KiCad packages3D, STEP)
- 3D model files: `pdta114yu-etched.step` / `pdta114yu-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pdta114yu.step` / `pdta114yu.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Nexperia datasheet](https://assets.nexperia.com/documents/data-sheet/PDTA114YU.pdf) (9 pp, sha256 `94e33ddd494a6e75`, retrieved 2026-11-09, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pdta114yu-datasheet.pdf)