Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PCT2075DP

NXP Semicon · Temperature Sensors · MSOP-8

PCT2075DP from NXP Semicon, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SDA bidirectional Digital I/O: I2C-bus serial bidirectional data line, open-drain, which can be pulled up to 5.5 V regardless of supply voltage.
2 SCL input Digital input: I2C-bus serial clock input, overvoltage tolerant to 5.5 V.
3 OS output Overtemp Shutdown output, open-drain, which becomes active when the temperature exceeds the programmed limits and can be pulled up to 5.5 V regardless of supply voltage.
4 GND power_in Ground: to be connected to the system ground.
5 A2 input Digital input: user-defined address bit 2.
6 A1 input Digital input: user-defined address bit 1.
7 A0 input Digital input: user-defined address bit 0.
8 VCC power_in Power supply, 2.7 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package MSOP-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC supply voltage (recommended) VCC 2.7 5.5 V 19
Ambient temperature (recommended) Tamb -55 125 °C 19
Input voltage SCL, SDA pins (recommended) VI -0.3 5.5 V SCL, SDA pins 19
Input voltage A0, A1, A2 pins (recommended) VI -0.3 V A0, A1, A2 pins; printed upper limit VCC+0.3 V 19
Output voltage SDA, OS pins (recommended) VO -0.3 5.5 V SDA, OS pins 19
Supply voltage (absolute maximum) VCC -0.3 6.5 V 19
Input voltage SCL, SDA pins (absolute maximum) VI -0.3 6.5 V SCL, SDA pins 19
Input voltage A0, A1, A2 pins (absolute maximum) VI -0.3 V A0, A1, A2 pins; printed upper limit VCC+0.3 V 19
Input current at input pins II -5 5 mA 19
Output sink current IO(sink) 60 mA SDA, OS pins 19
Output voltage (absolute maximum) VO -0.3 6.5 V SDA, OS pins 19
Storage temperature Tstg -65 150 °C 19
Junction temperature Tj 150 °C 19
Temperature accuracy Tacc -1 1 °C Tamb = -25 °C to +100 °C 19
Temperature accuracy Tacc -2 2 °C Tamb = -55 °C to +125 °C 19
Conversion period Tconv 0.1 3.2 s normal mode 20
Power-on reset voltage VPOR 2.6 V 20
Average supply current ICC(AV) 125 300 μA normal mode: I2C-bus inactive 20
Average supply current ICC(AV) 200 400 μA normal mode: I2C-bus active; fSCL = 1000 kHz 20
Average supply current in shutdown mode ICC(AV) 20 μA shutdown mode; Tamb = 125 °C 20
HIGH-level input current IIH 10 μA digital pins; VI = VCC; Tamb = 125 °C (PCT2075D, DP and TP only) 20
LOW-level input current IIL -1 1 μA digital pins; VI = 0 V 20
LOW-level output voltage VOL 0.4 V OS pin; IOL = 20 mA 20
Output leakage current ILO 20 μA SDA and OS pins; VOH = VCC 20
Number of programmable faults Nfault 1 6 number of faults programmable; conversions in overtemperature-shutdown fault queue 20
SCL clock frequency fSCL 20 1000 kHz see Figure 27 23
HIGH period of the SCL clock tHIGH 0.26 μs 23
LOW period of the SCL clock tLOW 0.5 μs 23
Hold time (repeated) START condition tHD;STA 0.26 μs 23
Data set-up time tSU;DAT 50 ns 23
Data hold time tHD;DAT 0 ns 23
Set-up time for STOP condition tSU;STO 0.26 μs 23
SMBus time-out time tto(SMBus) 25 35 ms 23

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PCT PCT2075D PCT2075 SO8 plastic small outline package; 8 leads; body width 3.9 mm SOT96-1 2

CAD (KiCad official)

  • Symbol: PCT2075DP
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: pct2075dp-etched.step / pct2075dp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pct2075dp.step / pct2075dp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (38 pp, sha256 d4273d732ecb1240, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF