component
PCM3168APAPR
Public Made by Adomby adom
Texas Instruments Audio Interface ICs, TQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+100@@ -0,0 +1,100 @@+# PCM3168APAPR++**Texas Instruments** · Audio Interface ICs · TQFP-64(10x10)++PCM3168APAPR from Texas Instruments, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VCOMAD | power_out | ADC analog common voltage decoupling output at 0.5 × VCCAD1 with 10 kΩ output impedance and ±1 μA source/sink capability. |+| 2 | AGNDAD2 | power_in | Analog ground 2 for ADC. |+| 3 | VCCAD2 | power_in | ADC analog power supply 2, 5 V. |+| 4 | RST | input | Reset and power-down control input with active low; 5-V tolerant Schmitt trigger with 50-kΩ typical internal pulldown resistor. |+| 5 | OVF | output | Overflow flag output for ADC indicating any six-channel ADC digital output exceeds full-scale range, held high for 1024 LRCKAD clock cycles. |+| 6 | LRCKAD | bidirectional | Audio data word clock input/output for ADC; input with Schmitt trigger and 50-kΩ pulldown in slave mode, output in master mode. |+| 7 | BCKAD | bidirectional | Audio data bit clock input/output for ADC; input with Schmitt trigger and 50-kΩ pulldown in slave mode, output in master mode. |+| 8 | DOUT1 | output | Audio data digital output for ADC1 and ADC2 with 20 pF maximum load capacitance. |+| 9 | DOUT2 | output | Audio data digital output for ADC3 and ADC4 with 20 pF maximum load capacitance. |+| 10 | DOUT3 | output | Audio data digital output for ADC5 and ADC6 with 20 pF maximum load capacitance. |+| 11 | DGND2 | power_in | Digital ground 2. |+| 12 | VDD2 | power_in | Digital power supply 2, 3.3 V. |+| 13 | ZERO | output | Zero detect flag output for DAC indicating all eight-channel DAC digital inputs have continued as zero data for 1024 LRCKDA clock cycles. |+| 14 | VCCDA1 | power_in | DAC analog power supply 1, 5 V. |+| 15 | VCOMDA | power_out | DAC voltage common decoupling output at 0.5 × VCCDA1 with 7.5 kΩ output impedance and ±1 μA source/sink capability. |+| 16 | AGNDDA1 | power_in | Analog ground 1 for DAC. |+| 17 | VOUT8+ | output | Positive analog output from DAC8 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage. |+| 18 | VOUT8- | output | Negative analog output from DAC8 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage. |+| 19 | VOUT7+ | output | Positive analog output from DAC7 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage. |+| 20 | VOUT7- | output | Negative analog output from DAC7 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage. |+| 21 | VOUT6+ | output | Positive analog output from DAC6 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage. |+| 22 | VOUT6- | output | Negative analog output from DAC6 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage. |+| 23 | VOUT5+ | output | Positive analog output from DAC5 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage. |+| 24 | VOUT5- | output | Negative analog output from DAC5 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage. |+| 25 | VOUT4+ | output | Positive analog output from DAC4 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage. |+| 26 | VOUT4- | output | Negative analog output from DAC4 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage. |+| 27 | VOUT3+ | output | Positive analog output from DAC3 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage. |+| 28 | VOUT3- | output | Negative analog output from DAC3 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage. |+| 29 | VOUT2+ | output | Positive analog output from DAC2 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage. |+| 30 | VOUT2- | output | Negative analog output from DAC2 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage. |+| 31 | VOUT1+ | output | Positive analog output from DAC1 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage. |+| 32 | VOUT1- | output | Negative analog output from DAC1 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage. |+| 33 | AGNDDA2 | power_in | Analog ground 2 for DAC. |+| 34 | VCCDA2 | power_in | DAC analog power supply 2, 5 V. |+| 35 | LRCKDA | bidirectional | Audio data word clock input/output for DAC; input with Schmitt trigger and 50-kΩ pulldown in slave mode, output in master mode. |+| 36 | BCKDA | bidirectional | Audio data bit clock input/output for DAC; input with Schmitt trigger and 50-kΩ pulldown in slave mode, output in master mode. |+| 37 | DIN1 | input | Audio data input for DAC1 and DAC2. |+| 38 | DIN2 | input | Audio data input for DAC3 and DAC4. |+| 39 | DIN3 | input | Audio data input for DAC5 and DAC6. |+| 40 | DIN4 | input | Audio data input for DAC7 and DAC8. |+| 41 | SCKI | input | System clock input operating at 2.048 to 36.864 MHz with 40% to 60% duty cycle; 5-V tolerant Schmitt trigger. |+| 42 | MC/SCL/FMT | input | SPI mode: master clock; I²C mode: serial clock; hardware mode: format select; 5-V tolerant Schmitt trigger. |+| 43 | MDI/SDA/DEMP | bidirectional | SPI mode: master data input; I²C mode: serial data open-drain; hardware mode: de-emphasis control; 5-V tolerant Schmitt trigger. |+| 44 | MDO/ADR1/MD1 | tri_state | SPI mode: master data output with 3-state (Hi-Z) operation when chip select high; I²C mode: address select 1; hardware mode: mode select 1. |+| 45 | MS/ADR0/MD0 | input | SPI mode: chip select; I²C mode: address select 0; hardware mode: mode select 0; 5-V tolerant Schmitt trigger with 50-kΩ typical internal pulldown resistor. |+| 46 | VDD1 | power_in | Digital power supply 1, 3.3 V. |+| 47 | DGND1 | power_in | Digital ground 1. |+| 48 | MODE | input | Control port mode selection; quad-state input (tied to VDD for SPI, pulled up for hardware single-ended, pulled down for hardware differential, tied to DGND for I²C) with 220 kΩ ±5% resistors. |+| 49 | VCCAD1 | power_in | ADC analog power supply 1, 5 V. |+| 50 | AGNDAD1 | power_in | Analog ground 1 for ADC. |+| 51 | VIN1- | input | Negative analog input to ADC1 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable. |+| 52 | VIN1+ | input | Positive analog input to ADC1 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS. |+| 53 | VIN2- | input | Negative analog input to ADC2 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable. |+| 54 | VIN2+ | input | Positive analog input to ADC2 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS. |+| 55 | VIN3- | input | Negative analog input to ADC3 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable. |+| 56 | VIN3+ | input | Positive analog input to ADC3 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS. |+| 57 | VIN4- | input | Negative analog input to ADC4 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable. |+| 58 | VIN4+ | input | Positive analog input to ADC4 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS. |+| 59 | VREFAD1 | power_out | ADC analog reference voltage 1 decoupling output at VCCAD1 V; connect to 10 μF electrolytic capacitor to analog ground. |+| 60 | VREFAD2 | power_out | ADC analog reference voltage 2 decoupling output at AGNDAD1 V; connect to 10 μF electrolytic capacitor to analog ground. |+| 61 | VIN5- | input | Negative analog input to ADC5 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable. |+| 62 | VIN5+ | input | Positive analog input to ADC5 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS. |+| 63 | VIN6- | input | Negative analog input to ADC6 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable. |+| 64 | VIN6+ | input | Positive analog input to ADC6 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TQFP-64(10x10) |+| Category | Interface |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `PCM3168APAPR`+- Footprint: `Package_QFP:TQFP-64_10x10mm_P0.5mm`+- 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `pcm3168apapr-etched.step` / `pcm3168apapr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pcm3168apapr.step` / `pcm3168apapr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/pcm3168a) (68 pp, sha256 `af140cfec70f58f5`, retrieved 2026-09-21, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/pcm3168apapr-datasheet.pdf)
page.jsonadded+477@@ -0,0 +1,477 @@+{+ "slug": "pcm3168apapr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Audio Interface ICs, TQFP-64(10x10). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "pcm3168apapr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "pcm3168apapr.kicad_sym",+ "pcm3168apapr.kicad_mod",+ "pcm3168apapr.glb",+ "pcm3168apapr.step",+ "pcm3168apapr.lbr",+ "docs/hero.png",+ "docs/pcm3168apapr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "PCM3168APAPR",+ "manufacturer": "Texas Instruments",+ "package": "TQFP-64(10x10)",+ "pin_count": 64,+ "category": "Interface",+ "subcategory": "Audio Interface ICs",+ "datasheet": "https://www.ti.com/cn/lit/gpn/pcm3168a",+ "parts": {+ "symbol": "pcm3168apapr.kicad_sym",+ "footprint": "pcm3168apapr.kicad_mod",+ "model_3d": "pcm3168apapr-etched.glb",+ "model_3d_plain": "pcm3168apapr.glb",+ "model_3d_step": "pcm3168apapr-etched.step",+ "model_3d_step_plain": "pcm3168apapr.step",+ "lbr": "pcm3168apapr.lbr"+ },+ "distributor_links": {+ "lcsc": "C529289"+ },+ "pins": [+ {+ "number": "1",+ "name": "VCOMAD",+ "type": "power_out",+ "description": "ADC analog common voltage decoupling output at 0.5 × VCCAD1 with 10 kΩ output impedance and ±1 μA source/sink capability."+ },+ {+ "number": "2",+ "name": "AGNDAD2",+ "type": "power_in",+ "description": "Analog ground 2 for ADC."+ },+ {+ "number": "3",+ "name": "VCCAD2",+ "type": "power_in",+ "description": "ADC analog power supply 2, 5 V."+ },+ {+ "number": "4",+ "name": "RST",+ "type": "input",+ "description": "Reset and power-down control input with active low; 5-V tolerant Schmitt trigger with 50-kΩ typical internal pulldown resistor."+ },+ {+ "number": "5",+ "name": "OVF",+ "type": "output",+ "description": "Overflow flag output for ADC indicating any six-channel ADC digital output exceeds full-scale range, held high for 1024 LRCKAD clock cycles."+ },+ {+ "number": "6",+ "name": "LRCKAD",+ "type": "bidirectional",+ "description": "Audio data word clock input/output for ADC; input with Schmitt trigger and 50-kΩ pulldown in slave mode, output in master mode."+ },+ {+ "number": "7",+ "name": "BCKAD",+ "type": "bidirectional",+ "description": "Audio data bit clock input/output for ADC; input with Schmitt trigger and 50-kΩ pulldown in slave mode, output in master mode."+ },+ {+ "number": "8",+ "name": "DOUT1",+ "type": "output",+ "description": "Audio data digital output for ADC1 and ADC2 with 20 pF maximum load capacitance."+ },+ {+ "number": "9",+ "name": "DOUT2",+ "type": "output",+ "description": "Audio data digital output for ADC3 and ADC4 with 20 pF maximum load capacitance."+ },+ {+ "number": "10",+ "name": "DOUT3",+ "type": "output",+ "description": "Audio data digital output for ADC5 and ADC6 with 20 pF maximum load capacitance."+ },+ {+ "number": "11",+ "name": "DGND2",+ "type": "power_in",+ "description": "Digital ground 2."+ },+ {+ "number": "12",+ "name": "VDD2",+ "type": "power_in",+ "description": "Digital power supply 2, 3.3 V."+ },+ {+ "number": "13",+ "name": "ZERO",+ "type": "output",+ "description": "Zero detect flag output for DAC indicating all eight-channel DAC digital inputs have continued as zero data for 1024 LRCKDA clock cycles."+ },+ {+ "number": "14",+ "name": "VCCDA1",+ "type": "power_in",+ "description": "DAC analog power supply 1, 5 V."+ },+ {+ "number": "15",+ "name": "VCOMDA",+ "type": "power_out",+ "description": "DAC voltage common decoupling output at 0.5 × VCCDA1 with 7.5 kΩ output impedance and ±1 μA source/sink capability."+ },+ {+ "number": "16",+ "name": "AGNDDA1",+ "type": "power_in",+ "description": "Analog ground 1 for DAC."+ },+ {+ "number": "17",+ "name": "VOUT8+",+ "type": "output",+ "description": "Positive analog output from DAC8 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."+ },+ {+ "number": "18",+ "name": "VOUT8–",+ "type": "output",+ "description": "Negative analog output from DAC8 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."+ },+ {+ "number": "19",+ "name": "VOUT7+",+ "type": "output",+ "description": "Positive analog output from DAC7 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."+ },+ {+ "number": "20",+ "name": "VOUT7–",+ "type": "output",+ "description": "Negative analog output from DAC7 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."+ },+ {+ "number": "21",+ "name": "VOUT6+",+ "type": "output",+ "description": "Positive analog output from DAC6 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."+ },+ {+ "number": "22",+ "name": "VOUT6–",+ "type": "output",+ "description": "Negative analog output from DAC6 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."+ },+ {+ "number": "23",+ "name": "VOUT5+",+ "type": "output",+ "description": "Positive analog output from DAC5 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."+ },+ {+ "number": "24",+ "name": "VOUT5–",+ "type": "output",+ "description": "Negative analog output from DAC5 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."+ },+ {+ "number": "25",+ "name": "VOUT4+",+ "type": "output",+ "description": "Positive analog output from DAC4 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."+ },+ {+ "number": "26",+ "name": "VOUT4–",+ "type": "output",+ "description": "Negative analog output from DAC4 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."+ },+ {+ "number": "27",+ "name": "VOUT3+",+ "type": "output",+ "description": "Positive analog output from DAC3 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."+ },+ {+ "number": "28",+ "name": "VOUT3–",+ "type": "output",+ "description": "Negative analog output from DAC3 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."+ },+ {+ "number": "29",+ "name": "VOUT2+",+ "type": "output",+ "description": "Positive analog output from DAC2 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."+ },+ {+ "number": "30",+ "name": "VOUT2–",+ "type": "output",+ "description": "Negative analog output from DAC2 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."+ },+ {+ "number": "31",+ "name": "VOUT1+",+ "type": "output",+ "description": "Positive analog output from DAC1 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."+ },+ {+ "number": "32",+ "name": "VOUT1–",+ "type": "output",+ "description": "Negative analog output from DAC1 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."+ },+ {+ "number": "33",+ "name": "AGNDDA2",+ "type": "power_in",+ "description": "Analog ground 2 for DAC."+ },+ {+ "number": "34",+ "name": "VCCDA2",+ "type": "power_in",+ "description": "DAC analog power supply 2, 5 V."+ },+ {+ "number": "35",+ "name": "LRCKDA",+ "type": "bidirectional",+ "description": "Audio data word clock input/output for DAC; input with Schmitt trigger and 50-kΩ pulldown in slave mode, output in master mode."+ },+ {+ "number": "36",+ "name": "BCKDA",+ "type": "bidirectional",+ "description": "Audio data bit clock input/output for DAC; input with Schmitt trigger and 50-kΩ pulldown in slave mode, output in master mode."+ },+ {+ "number": "37",+ "name": "DIN1",+ "type": "input",+ "description": "Audio data input for DAC1 and DAC2."+ },+ {+ "number": "38",+ "name": "DIN2",+ "type": "input",+ "description": "Audio data input for DAC3 and DAC4."+ },+ {+ "number": "39",+ "name": "DIN3",+ "type": "input",+ "description": "Audio data input for DAC5 and DAC6."+ },+ {+ "number": "40",+ "name": "DIN4",+ "type": "input",+ "description": "Audio data input for DAC7 and DAC8."+ },+ {+ "number": "41",+ "name": "SCKI",+ "type": "input",+ "description": "System clock input operating at 2.048 to 36.864 MHz with 40% to 60% duty cycle; 5-V tolerant Schmitt trigger."+ },+ {+ "number": "42",+ "name": "MC/SCL/FMT",+ "type": "input",+ "description": "SPI mode: master clock; I²C mode: serial clock; hardware mode: format select; 5-V tolerant Schmitt trigger."+ },+ {+ "number": "43",+ "name": "MDI/SDA/DEMP",+ "type": "bidirectional",+ "description": "SPI mode: master data input; I²C mode: serial data open-drain; hardware mode: de-emphasis control; 5-V tolerant Schmitt trigger."+ },+ {+ "number": "44",+ "name": "MDO/ADR1/MD1",+ "type": "tri_state",+ "description": "SPI mode: master data output with 3-state (Hi-Z) operation when chip select high; I²C mode: address select 1; hardware mode: mode select 1."+ },+ {+ "number": "45",+ "name": "MS/ADR0/MD0",+ "type": "input",+ "description": "SPI mode: chip select; I²C mode: address select 0; hardware mode: mode select 0; 5-V tolerant Schmitt trigger with 50-kΩ typical internal pulldown resistor."+ },+ {+ "number": "46",+ "name": "VDD1",+ "type": "power_in",+ "description": "Digital power supply 1, 3.3 V."+ },+ {+ "number": "47",+ "name": "DGND1",+ "type": "power_in",+ "description": "Digital ground 1."+ },+ {+ "number": "48",+ "name": "MODE",+ "type": "input",+ "description": "Control port mode selection; quad-state input (tied to VDD for SPI, pulled up for hardware single-ended, pulled down for hardware differential, tied to DGND for I²C) with 220 kΩ ±5% resistors."+ },+ {+ "number": "49",+ "name": "VCCAD1",+ "type": "power_in",+ "description": "ADC analog power supply 1, 5 V."+ },+ {+ "number": "50",+ "name": "AGNDAD1",+ "type": "power_in",+ "description": "Analog ground 1 for ADC."+ },+ {+ "number": "51",+ "name": "VIN1–",+ "type": "input",+ "description": "Negative analog input to ADC1 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable."+ },+ {+ "number": "52",+ "name": "VIN1+",+ "type": "input",+ "description": "Positive analog input to ADC1 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS."+ },+ {+ "number": "53",+ "name": "VIN2–",+ "type": "input",+ "description": "Negative analog input to ADC2 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable."+ },+ {+ "number": "54",+ "name": "VIN2+",+ "type": "input",+ "description": "Positive analog input to ADC2 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS."+ },+ {+ "number": "55",+ "name": "VIN3–",+ "type": "input",+ "description": "Negative analog input to ADC3 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable."+ },+ {+ "number": "56",+ "name": "VIN3+",+ "type": "input",+ "description": "Positive analog input to ADC3 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS."+ },+ {+ "number": "57",+ "name": "VIN4–",+ "type": "input",+ "description": "Negative analog input to ADC4 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable."+ },+ {+ "number": "58",+ "name": "VIN4+",+ "type": "input",+ "description": "Positive analog input to ADC4 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS."+ },+ {+ "number": "59",+ "name": "VREFAD1",+ "type": "power_out",+ "description": "ADC analog reference voltage 1 decoupling output at VCCAD1 V; connect to 10 μF electrolytic capacitor to analog ground."+ },+ {+ "number": "60",+ "name": "VREFAD2",+ "type": "power_out",+ "description": "ADC analog reference voltage 2 decoupling output at AGNDAD1 V; connect to 10 μF electrolytic capacitor to analog ground."+ },+ {+ "number": "61",+ "name": "VIN5–",+ "type": "input",+ "description": "Negative analog input to ADC5 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable."+ },+ {+ "number": "62",+ "name": "VIN5+",+ "type": "input",+ "description": "Positive analog input to ADC5 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS."+ },+ {+ "number": "63",+ "name": "VIN6–",+ "type": "input",+ "description": "Negative analog input to ADC6 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable."+ },+ {+ "number": "64",+ "name": "VIN6+",+ "type": "input",+ "description": "Positive analog input to ADC6 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 68,+ "cost_usd": 0.8427,+ "at": "2026-09-21T15:53:14"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/pcm3168a",+ "pages": 68,+ "sha256": "af140cfec70f58f5",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 64,+ "described": 64,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}