component
PCM3168APAPR
Public Made by Adomby adom
Texas Instruments Audio Interface ICs, TQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+60−57@@ -38,7 +38,7 @@ "number": "1", "name": "VCOMAD", "type": "power_out",- "description": "ADC analog common voltage decoupling output at 0.5 \u00d7 VCCAD1 with 10 k\u03a9 output impedance and \u00b11 \u03bcA source/sink capability."+ "description": "ADC analog common voltage decoupling output at 0.5 × VCCAD1 with 10 kΩ output impedance and ±1 μA source/sink capability." }, { "number": "2",@@ -56,7 +56,7 @@ "number": "4", "name": "RST", "type": "input",- "description": "Reset and power-down control input with active low; 5-V tolerant Schmitt trigger with 50-k\u03a9 typical internal pulldown resistor."+ "description": "Reset and power-down control input with active low; 5-V tolerant Schmitt trigger with 50-kΩ typical internal pulldown resistor." }, { "number": "5",@@ -68,13 +68,13 @@ "number": "6", "name": "LRCKAD", "type": "bidirectional",- "description": "Audio data word clock input/output for ADC; input with Schmitt trigger and 50-k\u03a9 pulldown in slave mode, output in master mode."+ "description": "Audio data word clock input/output for ADC; input with Schmitt trigger and 50-kΩ pulldown in slave mode, output in master mode." }, { "number": "7", "name": "BCKAD", "type": "bidirectional",- "description": "Audio data bit clock input/output for ADC; input with Schmitt trigger and 50-k\u03a9 pulldown in slave mode, output in master mode."+ "description": "Audio data bit clock input/output for ADC; input with Schmitt trigger and 50-kΩ pulldown in slave mode, output in master mode." }, { "number": "8",@@ -122,7 +122,7 @@ "number": "15", "name": "VCOMDA", "type": "power_out",- "description": "DAC voltage common decoupling output at 0.5 \u00d7 VCCDA1 with 7.5 k\u03a9 output impedance and \u00b11 \u03bcA source/sink capability."+ "description": "DAC voltage common decoupling output at 0.5 × VCCDA1 with 7.5 kΩ output impedance and ±1 μA source/sink capability." }, { "number": "16",@@ -134,97 +134,97 @@ "number": "17", "name": "VOUT8+", "type": "output",- "description": "Positive analog output from DAC8 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+ "description": "Positive analog output from DAC8 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage." }, { "number": "18",- "name": "VOUT8\u2013",+ "name": "VOUT8–", "type": "output",- "description": "Negative analog output from DAC8 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+ "description": "Negative analog output from DAC8 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage." }, { "number": "19", "name": "VOUT7+", "type": "output",- "description": "Positive analog output from DAC7 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+ "description": "Positive analog output from DAC7 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage." }, { "number": "20",- "name": "VOUT7\u2013",+ "name": "VOUT7–", "type": "output",- "description": "Negative analog output from DAC7 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+ "description": "Negative analog output from DAC7 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage." }, { "number": "21", "name": "VOUT6+", "type": "output",- "description": "Positive analog output from DAC6 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+ "description": "Positive analog output from DAC6 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage." }, { "number": "22",- "name": "VOUT6\u2013",+ "name": "VOUT6–", "type": "output",- "description": "Negative analog output from DAC6 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+ "description": "Negative analog output from DAC6 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage." }, { "number": "23", "name": "VOUT5+", "type": "output",- "description": "Positive analog output from DAC5 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+ "description": "Positive analog output from DAC5 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage." }, { "number": "24",- "name": "VOUT5\u2013",+ "name": "VOUT5–", "type": "output",- "description": "Negative analog output from DAC5 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+ "description": "Negative analog output from DAC5 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage." }, { "number": "25", "name": "VOUT4+", "type": "output",- "description": "Positive analog output from DAC4 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+ "description": "Positive analog output from DAC4 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage." }, { "number": "26",- "name": "VOUT4\u2013",+ "name": "VOUT4–", "type": "output",- "description": "Negative analog output from DAC4 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+ "description": "Negative analog output from DAC4 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage." }, { "number": "27", "name": "VOUT3+", "type": "output",- "description": "Positive analog output from DAC3 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+ "description": "Positive analog output from DAC3 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage." }, { "number": "28",- "name": "VOUT3\u2013",+ "name": "VOUT3–", "type": "output",- "description": "Negative analog output from DAC3 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+ "description": "Negative analog output from DAC3 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage." }, { "number": "29", "name": "VOUT2+", "type": "output",- "description": "Positive analog output from DAC2 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+ "description": "Positive analog output from DAC2 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage." }, { "number": "30",- "name": "VOUT2\u2013",+ "name": "VOUT2–", "type": "output",- "description": "Negative analog output from DAC2 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+ "description": "Negative analog output from DAC2 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage." }, { "number": "31", "name": "VOUT1+", "type": "output",- "description": "Positive analog output from DAC1 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+ "description": "Positive analog output from DAC1 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage." }, { "number": "32",- "name": "VOUT1\u2013",+ "name": "VOUT1–", "type": "output",- "description": "Negative analog output from DAC1 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+ "description": "Negative analog output from DAC1 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage." }, { "number": "33",@@ -242,13 +242,13 @@ "number": "35", "name": "LRCKDA", "type": "bidirectional",- "description": "Audio data word clock input/output for DAC; input with Schmitt trigger and 50-k\u03a9 pulldown in slave mode, output in master mode."+ "description": "Audio data word clock input/output for DAC; input with Schmitt trigger and 50-kΩ pulldown in slave mode, output in master mode." }, { "number": "36", "name": "BCKDA", "type": "bidirectional",- "description": "Audio data bit clock input/output for DAC; input with Schmitt trigger and 50-k\u03a9 pulldown in slave mode, output in master mode."+ "description": "Audio data bit clock input/output for DAC; input with Schmitt trigger and 50-kΩ pulldown in slave mode, output in master mode." }, { "number": "37",@@ -284,25 +284,25 @@ "number": "42", "name": "MC/SCL/FMT", "type": "input",- "description": "SPI mode: master clock; I\u00b2C mode: serial clock; hardware mode: format select; 5-V tolerant Schmitt trigger."+ "description": "SPI mode: master clock; I²C mode: serial clock; hardware mode: format select; 5-V tolerant Schmitt trigger." }, { "number": "43", "name": "MDI/SDA/DEMP", "type": "bidirectional",- "description": "SPI mode: master data input; I\u00b2C mode: serial data open-drain; hardware mode: de-emphasis control; 5-V tolerant Schmitt trigger."+ "description": "SPI mode: master data input; I²C mode: serial data open-drain; hardware mode: de-emphasis control; 5-V tolerant Schmitt trigger." }, { "number": "44", "name": "MDO/ADR1/MD1", "type": "tri_state",- "description": "SPI mode: master data output with 3-state (Hi-Z) operation when chip select high; I\u00b2C mode: address select 1; hardware mode: mode select 1."+ "description": "SPI mode: master data output with 3-state (Hi-Z) operation when chip select high; I²C mode: address select 1; hardware mode: mode select 1." }, { "number": "45", "name": "MS/ADR0/MD0", "type": "input",- "description": "SPI mode: chip select; I\u00b2C mode: address select 0; hardware mode: mode select 0; 5-V tolerant Schmitt trigger with 50-k\u03a9 typical internal pulldown resistor."+ "description": "SPI mode: chip select; I²C mode: address select 0; hardware mode: mode select 0; 5-V tolerant Schmitt trigger with 50-kΩ typical internal pulldown resistor." }, { "number": "46",@@ -320,7 +320,7 @@ "number": "48", "name": "MODE", "type": "input",- "description": "Control port mode selection; quad-state input (tied to VDD for SPI, pulled up for hardware single-ended, pulled down for hardware differential, tied to DGND for I\u00b2C) with 220 k\u03a9 \u00b15% resistors."+ "description": "Control port mode selection; quad-state input (tied to VDD for SPI, pulled up for hardware single-ended, pulled down for hardware differential, tied to DGND for I²C) with 220 kΩ ±5% resistors." }, { "number": "49",@@ -336,87 +336,87 @@ }, { "number": "51",- "name": "VIN1\u2013",+ "name": "VIN1–", "type": "input",- "description": "Negative analog input to ADC1 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended mode selectable."+ "description": "Negative analog input to ADC1 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable." }, { "number": "52", "name": "VIN1+", "type": "input",- "description": "Positive analog input to ADC1 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended 0.2 \u00d7 VCCAD1 VRMS."+ "description": "Positive analog input to ADC1 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS." }, { "number": "53",- "name": "VIN2\u2013",+ "name": "VIN2–", "type": "input",- "description": "Negative analog input to ADC2 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended mode selectable."+ "description": "Negative analog input to ADC2 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable." }, { "number": "54", "name": "VIN2+", "type": "input",- "description": "Positive analog input to ADC2 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended 0.2 \u00d7 VCCAD1 VRMS."+ "description": "Positive analog input to ADC2 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS." }, { "number": "55",- "name": "VIN3\u2013",+ "name": "VIN3–", "type": "input",- "description": "Negative analog input to ADC3 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended mode selectable."+ "description": "Negative analog input to ADC3 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable." }, { "number": "56", "name": "VIN3+", "type": "input",- "description": "Positive analog input to ADC3 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended 0.2 \u00d7 VCCAD1 VRMS."+ "description": "Positive analog input to ADC3 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS." }, { "number": "57",- "name": "VIN4\u2013",+ "name": "VIN4–", "type": "input",- "description": "Negative analog input to ADC4 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended mode selectable."+ "description": "Negative analog input to ADC4 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable." }, { "number": "58", "name": "VIN4+", "type": "input",- "description": "Positive analog input to ADC4 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended 0.2 \u00d7 VCCAD1 VRMS."+ "description": "Positive analog input to ADC4 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS." }, { "number": "59", "name": "VREFAD1", "type": "power_out",- "description": "ADC analog reference voltage 1 decoupling output at VCCAD1 V; connect to 10 \u03bcF electrolytic capacitor to analog ground."+ "description": "ADC analog reference voltage 1 decoupling output at VCCAD1 V; connect to 10 μF electrolytic capacitor to analog ground." }, { "number": "60", "name": "VREFAD2", "type": "power_out",- "description": "ADC analog reference voltage 2 decoupling output at AGNDAD1 V; connect to 10 \u03bcF electrolytic capacitor to analog ground."+ "description": "ADC analog reference voltage 2 decoupling output at AGNDAD1 V; connect to 10 μF electrolytic capacitor to analog ground." }, { "number": "61",- "name": "VIN5\u2013",+ "name": "VIN5–", "type": "input",- "description": "Negative analog input to ADC5 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended mode selectable."+ "description": "Negative analog input to ADC5 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable." }, { "number": "62", "name": "VIN5+", "type": "input",- "description": "Positive analog input to ADC5 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended 0.2 \u00d7 VCCAD1 VRMS."+ "description": "Positive analog input to ADC5 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS." }, { "number": "63",- "name": "VIN6\u2013",+ "name": "VIN6–", "type": "input",- "description": "Negative analog input to ADC6 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended mode selectable."+ "description": "Negative analog input to ADC6 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable." }, { "number": "64", "name": "VIN6+", "type": "input",- "description": "Positive analog input to ADC6 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended 0.2 \u00d7 VCCAD1 VRMS."+ "description": "Positive analog input to ADC6 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS." } ], "provenance": {@@ -494,5 +494,8 @@ "docs/pcm3168apapr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }