← Commit history

pcm3168apapr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·6bfe087375 · ·parent 8e60fad
2 files changed +140−60
package.json+98−58
@@ -53,7 +53,7 @@         "number": "1",         "name": "VCOMAD",         "type": "power_out",-        "description": "ADC analog common voltage decoupling output at 0.5 \u00d7 VCCAD1 with 10 k\u03a9 output impedance and \u00b11 \u03bcA source/sink capability."+        "description": "ADC analog common voltage decoupling output at 0.5 × VCCAD1 with 10 kΩ output impedance and ±1 μA source/sink capability."       },       {         "number": "2",@@ -71,7 +71,7 @@         "number": "4",         "name": "RST",         "type": "input",-        "description": "Reset and power-down control input with active low; 5-V tolerant Schmitt trigger with 50-k\u03a9 typical internal pulldown resistor."+        "description": "Reset and power-down control input with active low; 5-V tolerant Schmitt trigger with 50-kΩ typical internal pulldown resistor."       },       {         "number": "5",@@ -83,13 +83,13 @@         "number": "6",         "name": "LRCKAD",         "type": "bidirectional",-        "description": "Audio data word clock input/output for ADC; input with Schmitt trigger and 50-k\u03a9 pulldown in slave mode, output in master mode."+        "description": "Audio data word clock input/output for ADC; input with Schmitt trigger and 50-kΩ pulldown in slave mode, output in master mode."       },       {         "number": "7",         "name": "BCKAD",         "type": "bidirectional",-        "description": "Audio data bit clock input/output for ADC; input with Schmitt trigger and 50-k\u03a9 pulldown in slave mode, output in master mode."+        "description": "Audio data bit clock input/output for ADC; input with Schmitt trigger and 50-kΩ pulldown in slave mode, output in master mode."       },       {         "number": "8",@@ -137,7 +137,7 @@         "number": "15",         "name": "VCOMDA",         "type": "power_out",-        "description": "DAC voltage common decoupling output at 0.5 \u00d7 VCCDA1 with 7.5 k\u03a9 output impedance and \u00b11 \u03bcA source/sink capability."+        "description": "DAC voltage common decoupling output at 0.5 × VCCDA1 with 7.5 kΩ output impedance and ±1 μA source/sink capability."       },       {         "number": "16",@@ -149,97 +149,97 @@         "number": "17",         "name": "VOUT8+",         "type": "output",-        "description": "Positive analog output from DAC8 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+        "description": "Positive analog output from DAC8 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."       },       {         "number": "18",-        "name": "VOUT8\u2013",+        "name": "VOUT8–",         "type": "output",-        "description": "Negative analog output from DAC8 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+        "description": "Negative analog output from DAC8 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."       },       {         "number": "19",         "name": "VOUT7+",         "type": "output",-        "description": "Positive analog output from DAC7 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+        "description": "Positive analog output from DAC7 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."       },       {         "number": "20",-        "name": "VOUT7\u2013",+        "name": "VOUT7–",         "type": "output",-        "description": "Negative analog output from DAC7 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+        "description": "Negative analog output from DAC7 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."       },       {         "number": "21",         "name": "VOUT6+",         "type": "output",-        "description": "Positive analog output from DAC6 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+        "description": "Positive analog output from DAC6 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."       },       {         "number": "22",-        "name": "VOUT6\u2013",+        "name": "VOUT6–",         "type": "output",-        "description": "Negative analog output from DAC6 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+        "description": "Negative analog output from DAC6 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."       },       {         "number": "23",         "name": "VOUT5+",         "type": "output",-        "description": "Positive analog output from DAC5 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+        "description": "Positive analog output from DAC5 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."       },       {         "number": "24",-        "name": "VOUT5\u2013",+        "name": "VOUT5–",         "type": "output",-        "description": "Negative analog output from DAC5 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+        "description": "Negative analog output from DAC5 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."       },       {         "number": "25",         "name": "VOUT4+",         "type": "output",-        "description": "Positive analog output from DAC4 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+        "description": "Positive analog output from DAC4 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."       },       {         "number": "26",-        "name": "VOUT4\u2013",+        "name": "VOUT4–",         "type": "output",-        "description": "Negative analog output from DAC4 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+        "description": "Negative analog output from DAC4 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."       },       {         "number": "27",         "name": "VOUT3+",         "type": "output",-        "description": "Positive analog output from DAC3 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+        "description": "Positive analog output from DAC3 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."       },       {         "number": "28",-        "name": "VOUT3\u2013",+        "name": "VOUT3–",         "type": "output",-        "description": "Negative analog output from DAC3 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+        "description": "Negative analog output from DAC3 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."       },       {         "number": "29",         "name": "VOUT2+",         "type": "output",-        "description": "Positive analog output from DAC2 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+        "description": "Positive analog output from DAC2 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."       },       {         "number": "30",-        "name": "VOUT2\u2013",+        "name": "VOUT2–",         "type": "output",-        "description": "Negative analog output from DAC2 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+        "description": "Negative analog output from DAC2 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."       },       {         "number": "31",         "name": "VOUT1+",         "type": "output",-        "description": "Positive analog output from DAC1 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+        "description": "Positive analog output from DAC1 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."       },       {         "number": "32",-        "name": "VOUT1\u2013",+        "name": "VOUT1–",         "type": "output",-        "description": "Negative analog output from DAC1 with 1.6 \u00d7 VCCDA1 VPP differential voltage capability and 0.5 \u00d7 VCCDA1 V center voltage."+        "description": "Negative analog output from DAC1 with 1.6 × VCCDA1 VPP differential voltage capability and 0.5 × VCCDA1 V center voltage."       },       {         "number": "33",@@ -257,13 +257,13 @@         "number": "35",         "name": "LRCKDA",         "type": "bidirectional",-        "description": "Audio data word clock input/output for DAC; input with Schmitt trigger and 50-k\u03a9 pulldown in slave mode, output in master mode."+        "description": "Audio data word clock input/output for DAC; input with Schmitt trigger and 50-kΩ pulldown in slave mode, output in master mode."       },       {         "number": "36",         "name": "BCKDA",         "type": "bidirectional",-        "description": "Audio data bit clock input/output for DAC; input with Schmitt trigger and 50-k\u03a9 pulldown in slave mode, output in master mode."+        "description": "Audio data bit clock input/output for DAC; input with Schmitt trigger and 50-kΩ pulldown in slave mode, output in master mode."       },       {         "number": "37",@@ -299,25 +299,25 @@         "number": "42",         "name": "MC/SCL/FMT",         "type": "input",-        "description": "SPI mode: master clock; I\u00b2C mode: serial clock; hardware mode: format select; 5-V tolerant Schmitt trigger."+        "description": "SPI mode: master clock; I²C mode: serial clock; hardware mode: format select; 5-V tolerant Schmitt trigger."       },       {         "number": "43",         "name": "MDI/SDA/DEMP",         "type": "bidirectional",-        "description": "SPI mode: master data input; I\u00b2C mode: serial data open-drain; hardware mode: de-emphasis control; 5-V tolerant Schmitt trigger."+        "description": "SPI mode: master data input; I²C mode: serial data open-drain; hardware mode: de-emphasis control; 5-V tolerant Schmitt trigger."       },       {         "number": "44",         "name": "MDO/ADR1/MD1",         "type": "tri_state",-        "description": "SPI mode: master data output with 3-state (Hi-Z) operation when chip select high; I\u00b2C mode: address select 1; hardware mode: mode select 1."+        "description": "SPI mode: master data output with 3-state (Hi-Z) operation when chip select high; I²C mode: address select 1; hardware mode: mode select 1."       },       {         "number": "45",         "name": "MS/ADR0/MD0",         "type": "input",-        "description": "SPI mode: chip select; I\u00b2C mode: address select 0; hardware mode: mode select 0; 5-V tolerant Schmitt trigger with 50-k\u03a9 typical internal pulldown resistor."+        "description": "SPI mode: chip select; I²C mode: address select 0; hardware mode: mode select 0; 5-V tolerant Schmitt trigger with 50-kΩ typical internal pulldown resistor."       },       {         "number": "46",@@ -335,7 +335,7 @@         "number": "48",         "name": "MODE",         "type": "input",-        "description": "Control port mode selection; quad-state input (tied to VDD for SPI, pulled up for hardware single-ended, pulled down for hardware differential, tied to DGND for I\u00b2C) with 220 k\u03a9 \u00b15% resistors."+        "description": "Control port mode selection; quad-state input (tied to VDD for SPI, pulled up for hardware single-ended, pulled down for hardware differential, tied to DGND for I²C) with 220 kΩ ±5% resistors."       },       {         "number": "49",@@ -351,87 +351,87 @@       },       {         "number": "51",-        "name": "VIN1\u2013",+        "name": "VIN1–",         "type": "input",-        "description": "Negative analog input to ADC1 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended mode selectable."+        "description": "Negative analog input to ADC1 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable."       },       {         "number": "52",         "name": "VIN1+",         "type": "input",-        "description": "Positive analog input to ADC1 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended 0.2 \u00d7 VCCAD1 VRMS."+        "description": "Positive analog input to ADC1 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS."       },       {         "number": "53",-        "name": "VIN2\u2013",+        "name": "VIN2–",         "type": "input",-        "description": "Negative analog input to ADC2 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended mode selectable."+        "description": "Negative analog input to ADC2 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable."       },       {         "number": "54",         "name": "VIN2+",         "type": "input",-        "description": "Positive analog input to ADC2 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended 0.2 \u00d7 VCCAD1 VRMS."+        "description": "Positive analog input to ADC2 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS."       },       {         "number": "55",-        "name": "VIN3\u2013",+        "name": "VIN3–",         "type": "input",-        "description": "Negative analog input to ADC3 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended mode selectable."+        "description": "Negative analog input to ADC3 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable."       },       {         "number": "56",         "name": "VIN3+",         "type": "input",-        "description": "Positive analog input to ADC3 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended 0.2 \u00d7 VCCAD1 VRMS."+        "description": "Positive analog input to ADC3 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS."       },       {         "number": "57",-        "name": "VIN4\u2013",+        "name": "VIN4–",         "type": "input",-        "description": "Negative analog input to ADC4 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended mode selectable."+        "description": "Negative analog input to ADC4 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable."       },       {         "number": "58",         "name": "VIN4+",         "type": "input",-        "description": "Positive analog input to ADC4 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended 0.2 \u00d7 VCCAD1 VRMS."+        "description": "Positive analog input to ADC4 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS."       },       {         "number": "59",         "name": "VREFAD1",         "type": "power_out",-        "description": "ADC analog reference voltage 1 decoupling output at VCCAD1 V; connect to 10 \u03bcF electrolytic capacitor to analog ground."+        "description": "ADC analog reference voltage 1 decoupling output at VCCAD1 V; connect to 10 μF electrolytic capacitor to analog ground."       },       {         "number": "60",         "name": "VREFAD2",         "type": "power_out",-        "description": "ADC analog reference voltage 2 decoupling output at AGNDAD1 V; connect to 10 \u03bcF electrolytic capacitor to analog ground."+        "description": "ADC analog reference voltage 2 decoupling output at AGNDAD1 V; connect to 10 μF electrolytic capacitor to analog ground."       },       {         "number": "61",-        "name": "VIN5\u2013",+        "name": "VIN5–",         "type": "input",-        "description": "Negative analog input to ADC5 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended mode selectable."+        "description": "Negative analog input to ADC5 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable."       },       {         "number": "62",         "name": "VIN5+",         "type": "input",-        "description": "Positive analog input to ADC5 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended 0.2 \u00d7 VCCAD1 VRMS."+        "description": "Positive analog input to ADC5 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS."       },       {         "number": "63",-        "name": "VIN6\u2013",+        "name": "VIN6–",         "type": "input",-        "description": "Negative analog input to ADC6 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended mode selectable."+        "description": "Negative analog input to ADC6 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended mode selectable."       },       {         "number": "64",         "name": "VIN6+",         "type": "input",-        "description": "Positive analog input to ADC6 with 45 k\u03a9 input impedance; differential 0.4 \u00d7 VCCAD1 VRMS or single-ended 0.2 \u00d7 VCCAD1 VRMS."+        "description": "Positive analog input to ADC6 with 45 kΩ input impedance; differential 0.4 × VCCAD1 VRMS or single-ended 0.2 × VCCAD1 VRMS."       }     ],     "provenance": {@@ -466,6 +466,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "pcm3168apapr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          12.0,+          12.0,+          1.1+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "60567e81b0770b6c519104183a7a05ba52dddc11146b5fbe21434fbb5801696c",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "pcm3168apapr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          12.0,+          12.0,+          1.1+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "648e4b74665f1185f1824c73ac41d42551c02c79c33b1f73573af86bc19cc6cb",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -451,7 +451,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "pcm3168apapr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          12.0,+          12.0,+          1.1+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "60567e81b0770b6c519104183a7a05ba52dddc11146b5fbe21434fbb5801696c",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "pcm3168apapr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          12.0,+          12.0,+          1.1+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "648e4b74665f1185f1824c73ac41d42551c02c79c33b1f73573af86bc19cc6cb",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -499,4 +539,4 @@     "public": true   },   "updated_at": "2026-09-25T04:12:31.784Z"-}\ No newline at end of file+}