component
PCM3008T
Public Made by Adomby adom
Texas Instruments Audio Interface ICs, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272
{
"schema_version": 1,
"type": "component",
"slug": "pcm3008t",
"title": "PCM3008T",
"brief": "Texas Instruments Audio Interface ICs, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"interface",
"pcm3008t",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "PCM3008T",
"manufacturer": "Texas Instruments",
"package": "TSSOP-16",
"pin_count": 16,
"category": "Interface",
"subcategory": "Audio Interface ICs",
"datasheet": "https://www.ti.com/cn/lit/gpn/pcm3008",
"parts": {
"symbol": "pcm3008t.kicad_sym",
"footprint": "pcm3008t.kicad_mod",
"model_3d": "pcm3008t-hero.glb",
"model_3d_plain": "pcm3008t.glb",
"model_3d_step": "pcm3008t-etched.step",
"model_3d_step_plain": "pcm3008t.step",
"lbr": "pcm3008t.lbr"
},
"distributor_links": {
"lcsc": "C2151236",
"digikey": "PCM3008T-ND",
"mouser": "595-PCM3008T"
},
"distributor_check": {
"checked_at": "2026-10-08T20:50:06Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "PCM3008T-ND",
"status": "found"
},
"mouser": {
"pn": "595-PCM3008T",
"status": "found",
"lifecycle": "Obsolete"
}
},
"pins": [
{
"number": "1",
"name": "VCOM",
"type": "passive",
"description": "ADC/DAC common-voltage decouple pin that must be bypassed to GND with a 0.1 µF ceramic and a 1 µF or larger chemical capacitor placed as close to the pin as possible."
},
{
"number": "2",
"name": "VINR",
"type": "input",
"description": "ADC single-ended analog input for the right channel, with 30 kΩ input impedance and 0.6 VCC Vp-p input voltage, AC-coupled through a 0.47 µF to 4.7 µF capacitor."
},
{
"number": "3",
"name": "VINL",
"type": "input",
"description": "ADC single-ended analog input for the left channel, with 30 kΩ input impedance and 0.6 VCC Vp-p input voltage, AC-coupled through a 0.47 µF to 4.7 µF capacitor."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Ground; the analog and digital grounds are internally tied and VCC must be bypassed to this pin."
},
{
"number": "5",
"name": "VCC",
"type": "power_in",
"description": "Power supply, 2.1 V min to 3.6 V max (2.4 V typical), bypassed to GND with 0.1 µF ceramic and 10 µF chemical capacitors as close to the pins as possible."
},
{
"number": "6",
"name": "DEM0",
"type": "input",
"description": "De-emphasis control 0 (Schmitt trigger input, 3.3 V tolerant) that selects the DAC de-emphasis mode together with DEM1; the pin must not be left open."
},
{
"number": "7",
"name": "DEM1",
"type": "input",
"description": "De-emphasis control 1 (Schmitt trigger input, 3.3 V tolerant) that selects the DAC de-emphasis mode together with DEM0; the pin must not be left open."
},
{
"number": "8",
"name": "DOUT",
"type": "output",
"description": "ADC serial data output in 16-bit left-justified format, forced to zero during ADC power-down and during the initialization sequence."
},
{
"number": "9",
"name": "DIN",
"type": "input",
"description": "DAC serial data input in 16-bit right-justified format (Schmitt trigger input, 3.3 V tolerant), which must not be left open because there is no internal pullup or pulldown."
},
{
"number": "10",
"name": "LRCK",
"type": "input",
"description": "Sampling clock (left/right channel) input synchronized to SYSCK (Schmitt trigger input, 3.3 V tolerant), which must not be left open because there is no internal pullup or pulldown."
},
{
"number": "11",
"name": "SYSCK",
"type": "input",
"description": "System clock input that must be 256fS, 384fS or 512fS, with minimum 15 ns high and low pulse widths and carefully managed duty cycle and jitter (Schmitt trigger input, 3.3 V tolerant)."
},
{
"number": "12",
"name": "BCK",
"type": "input",
"description": "Bit clock input supporting 64, 48 or 32 BCK clocks per LRCK period (Schmitt trigger input, 3.3 V tolerant), which must not be left open."
},
{
"number": "13",
"name": "PDAD",
"type": "input",
"description": "ADC power-down control, active low: low places the ADC in its lowest power mode, and PDAD and PDDA both low put the device into reset."
},
{
"number": "14",
"name": "PDDA",
"type": "input",
"description": "DAC power-down control, active low: low places the DAC in its lowest power mode with VOUT forced to VCOM, and PDAD and PDDA both low put the device into reset."
},
{
"number": "15",
"name": "VOUTL",
"type": "output",
"description": "DAC single-ended analog output for the left channel, with 0.6 VCC Vp-p output voltage and a 10 kΩ AC-coupled load impedance."
},
{
"number": "16",
"name": "VOUTR",
"type": "output",
"description": "DAC single-ended analog output for the right channel, with 0.6 VCC Vp-p output voltage and a 10 kΩ AC-coupled load impedance."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet lists pin 1 (VCOM) with I/O '–' and no ERC type; I classified it as passive since it i; Analog inputs VINL/VINR and outputs VOUTL/VOUTR are typed as input/output per the datasheet I/O colu; Datasheet typos noted and not used for pin data: absolute maximum ratings list 'PDAL' instead of PDA"
],
"pages_sent": 28,
"cost_usd": 0.1049,
"at": "2026-10-08T20:49:33"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/pcm3008",
"pages": 28,
"sha256": "bac647c89e9d2659",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "pcm3008t.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
5,
1.1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",
"checked": "2026-10-08",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "pcm3008t-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
5,
1.1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "2e048e480387e11a4d47797bc0fd4f8c731327beb5185152ef826ed578dba2ef",
"checked": "2026-10-08",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "TSSOP-16",
"Category": "Interface",
"Pins": "16"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"pcm3008t"
],
"discovery_pitch": "PCM3008T (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray",
"email": "[email protected]"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"pcm3008t.kicad_sym",
"pcm3008t.kicad_mod",
"pcm3008t.glb",
"pcm3008t.step",
"pcm3008t.lbr",
"docs/hero.png",
"docs/pcm3008t-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"pcm3008t-hero.glb",
"pcm3008t-hero.overlay.json"
],
"visibility": {
"public": true
}
}