main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs pcm2705cdbr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pcm2705cdbr: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Brief states the pinout check that actually ran (was an unconditional "Datasheet-verified pinout") · Ray
pcm2705cdbr-etched.fit.json pcm2705cdbr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pcm2705cdbr-etched.glb pcm2705cdbr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pcm2705cdbr-etched.step pcm2705cdbr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pcm2705cdbr.glb Publish 0.1.0 · Ray
pcm2705cdbr.kicad_mod Publish 0.1.0 · Ray
pcm2705cdbr.kicad_sym Publish 0.1.0 · Ray
pcm2705cdbr.lbr Publish 0.1.0 · Ray
pcm2705cdbr.step Publish 0.1.0 · Ray
README.md Initial commit: component/pcm2705cdbr · Ray

PCM2705CDBR

Texas Instruments · ADCs/DACs - Special Purpose · SSOP-28

PCM2705CDBR from Texas Instruments, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 XTO output 12 MHz crystal oscillator output.
2 CK output Must be left open for PCM2705C (clock output for external ROM not applicable).
3 DT bidirectional Must be left open with pull-up resistor for PCM2705C (data input/output for external ROM not applicable).
4 PSEL input Power mode select; low = self-powered, high = bus-powered; LV-TTL level.
5 DOUT output S/PDIF digital audio output.
6 DGND power_in Digital ground reference.
7 VDD power_in Digital power supply, 3.0-3.6 V for self-powered operation.
8 D- bidirectional USB differential input/output minus; LV-TTL level.
9 D+ bidirectional USB differential input/output plus; LV-TTL level; requires 1.5 kΩ pull-up resistor to 3.3 V.
10 VBUS power_in USB power input 4.35-5.25 V for bus-powered operation or connection to VDD for self-powered operation.
11 ZGND power_in Ground reference for internal voltage regulator.
12 AGNDL power_in Analog ground reference for left-channel headphone amplifier.
13 VCCL power_in Analog power supply input for left-channel headphone amplifier, 3.0-3.6 V; requires decoupling capacitor to GND.
14 VOUTL output DAC analog output for left-channel delivering 1.8 VPP into 10 kΩ load or 12 mW into 32 Ω headphone load.
15 VOUTR output DAC analog output for right-channel delivering 1.8 VPP into 10 kΩ load or 12 mW into 32 Ω headphone load.
16 VCCR power_in Analog power supply input for right-channel headphone amplifier, 3.0-3.6 V; requires decoupling capacitor to GND.
17 AGNDR power_in Analog ground reference for right-channel headphone amplifier.
18 VCOM output DAC common mode voltage output, nominally VCCP/2; requires decoupling capacitor to PGND.
19 PGND power_in Analog ground reference for DAC, oscillator, and PLL.
20 VCCP power_in Analog power supply input for DAC, oscillator, and PLL, 3.0-3.6 V; requires decoupling capacitor to GND.
21 HOST input Host detection during self-powered operation (connect to VBUS) or maximum power selection during bus-powered operation (low: 100 mA, high: 500 mA); LV-TTL level, 5-V tolerant.
22 HID0/MS input MS input for PCM2705C; internally pulled down; active high; LV-TTL level.
23 HID1/MC input MC input for PCM2705C; internally pulled down; active high; LV-TTL level.
24 HID2/MD input MD input for PCM2705C; internally pulled down; active high; LV-TTL level.
25 TEST1 input Test pin; must be set high; LV-TTL level.
26 TEST0 input Test pin; must be set high; LV-TTL level.
27 SSPND output Suspend flag output, active low (low: USB suspended, high: operational).
28 XTI input 12 MHz crystal oscillator input or external clock input at 11.994-12.006 MHz; LV-TTL level.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SSOP-28
Category Data Acquisition
Pins 28

CAD (KiCad official)

  • Symbol: PCM2705CDBR
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28 (KiCad packages3D, STEP)
  • 3D model files: pcm2705cdbr-etched.step / pcm2705cdbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pcm2705cdbr.step / pcm2705cdbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (53 pp, sha256 36480dfb52585877, retrieved 2026-09-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF