component
PCM1804S1IDBRQ1
Public Made by Adomby adom
Texas Instruments ADCs/DACs - Special Purpose, SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownPCM1804S1IDBRQ1
Texas Instruments · ADCs/DACs - Special Purpose · SSOP-28
PCM1804S1IDBRQ1 from Texas Instruments, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VREFL | power_out | Left-channel voltage reference output, requires capacitors for decoupling to AGND |
| 2 | AGNDL | power_in | Analog ground for VREFL |
| 3 | VCOML | power_in | Left-channel analog common-mode voltage (2.5 V) |
| 4 | VINL+ | input | Left-channel analog input, positive pin |
| 5 | VINL- | input | Left-channel analog input, negative pin |
| 6 | FMT0 | input | Audio data format 0, Schmitt-trigger input with internal pulldown |
| 7 | FMT1 | input | Audio data format 1, Schmitt-trigger input with internal pulldown |
| 8 | S/M | input | Slave or master mode selection, Schmitt-trigger input with internal pulldown |
| 9 | OSR0 | input | Oversampling ratio 0, Schmitt-trigger input with internal pulldown |
| 10 | OSR1 | input | Oversampling ratio 1, Schmitt-trigger input with internal pulldown |
| 11 | OSR2 | input | Oversampling ratio 2, Schmitt-trigger input with internal pulldown |
| 12 | BYPAS | input | HPF bypass control, High: HPF disabled, Low: HPF enabled, Schmitt-trigger input |
| 13 | DGND | power_in | Digital ground |
| 14 | VDD | power_in | Digital power supply |
| 15 | DATA/DSDR | output | Left-channel and right-channel audio data output in PCM mode, right-channel audio data output in DSD mode |
| 16 | BCK/DSDL | bidirectional | Bit clock input/output in PCM mode, left-channel audio data output in DSD mode, Schmitt-trigger input |
| 17 | LRCK/DSDBCK | bidirectional | Sampling clock input/output in PCM and DSD modes, Schmitt-trigger input |
| 18 | SCKI | input | System clock input (128 fS, 256 fS, 384 fS, 512 fS, or 768 fS), Schmitt-trigger input 5-V tolerant |
| 19 | RST | input | Reset, power-down input, active-low, Schmitt-trigger input with internal pulldown |
| 20 | OVFR | output | Overflow signal of right-channel in PCM mode |
| 21 | OVFL | output | Overflow signal of left-channel in PCM mode |
| 22 | VCC | power_in | Analog power supply |
| 23 | AGND | power_in | Analog ground |
| 24 | VINR- | input | Right-channel analog input, negative pin |
| 25 | VINR+ | input | Right-channel analog input, positive pin |
| 26 | VCOMR | power_in | Right-channel analog common-mode voltage (2.5 V) |
| 27 | AGNDR | power_in | Analog ground for VREFR |
| 28 | VREFR | power_out | Right-channel voltage reference output, requires capacitors for decoupling to AGND |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-28 |
| Category | Data Acquisition |
| Pins | 28 |
CAD (KiCad official)
- Symbol:
PCM1804S1IDBRQ1 - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28 (KiCad packages3D, STEP)
- 3D model files:
pcm1804s1idbrq1-etched.step/pcm1804s1idbrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pcm1804s1idbrq1.step/pcm1804s1idbrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
c46d2d038a145fa0, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).