component
PCM1754DBQR
Public Made by Adomby adom
Texas Instruments ADCs/DACs - Special Purpose, SSOP-16-150mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownPCM1754DBQR
Texas Instruments · ADCs/DACs - Special Purpose · SSOP-16-150mil
PCM1754DBQR from Texas Instruments, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BCK | input | Serial audio bit-clock input used to clock serial audio data from DATA pin into the serial shift register on rising edge. |
| 2 | DATA | input | Serial audio data digital input carrying 2's complement MSB-first audio data. |
| 3 | LRCK | input | L-channel and R-channel audio data word clock input used to latch serial audio data into the internal interface registers. |
| 4 | DGND | power_in | Digital ground. |
| 5 | NC | unconnected | No connection. |
| 6 | VCC | power_in | Analog power supply input; 5 V nominal with operating range 4.5 V to 5.5 V. |
| 7 | VOUTL | output | Unbalanced analog output for left channel; 4 VPP typical into 5-kΩ ac-coupled load, biased to 0.5 VCC common-mode voltage. |
| 8 | VOUTR | output | Unbalanced analog output for right channel; 4 VPP typical into 5-kΩ ac-coupled load, biased to 0.5 VCC common-mode voltage. |
| 9 | AGND | power_in | Analog ground. |
| 10 | VCOM | output | Unbuffered common-mode voltage output nominally at 0.5 VCC for decoupling and biasing external circuits. |
| 11 | ZEROA | output | Zero flag output for common L-/R-channel detection; set to logic 1 when both channels data remain at 0 for 1024 sampling periods. |
| 12 | TEST | input | Test configuration input; connect to ground or leave open. |
| 13 | DEMP | input | De-emphasis control input; HIGH enables 44.1 kHz de-emphasis, LOW disables de-emphasis. |
| 14 | MUTE | input | Mute control input; HIGH enables soft mute, LOW disables mute. |
| 15 | FMT | input | Data format select input; LOW for 16- to 24-bit I2S format, HIGH for 16-bit right-justified format. |
| 16 | SCK | input | System clock input for operating digital interpolation filters and multilevel delta-sigma modulators. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16-150mil |
| Category | Data Acquisition |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
PCM1754DBQR - Footprint:
Package_SO:SSOP-16_5.3x6.2mm_P0.65mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
pcm1754dbqr-etched.step/pcm1754dbqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pcm1754dbqr.step/pcm1754dbqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
9268f6bad086f242, retrieved 2026-09-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).