main
Ray Publish 0.1.0 f780e9d
{
  "slug": "pcf8574m",
  "version": "0.1.0",
  "type": "component",
  "description": "HGSEMI I/O Expanders, SOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "communication interface chip-uart-485-232",
    "pcf8574m",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pcf8574m.kicad_sym",
    "pcf8574m.kicad_mod",
    "pcf8574m.glb",
    "pcf8574m.step",
    "pcf8574m.lbr",
    "docs/hero.png",
    "docs/pcf8574m-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "pcf8574m-hero.glb",
    "pcf8574m-hero.overlay.json"
  ],
  "component": {
    "mpn": "PCF8574M",
    "manufacturer": "HGSEMI",
    "package": "SOP-16-150mil",
    "pin_count": 16,
    "category": "Communication Interface Chip/UART/485/232",
    "subcategory": "I/O Expanders",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/4b90e43acbd9bf893744018942fdd643.pdf",
    "parts": {
      "symbol": "pcf8574m.kicad_sym",
      "footprint": "pcf8574m.kicad_mod",
      "model_3d": "pcf8574m-hero.glb",
      "model_3d_plain": "pcf8574m.glb",
      "model_3d_step": "pcf8574m-etched.step",
      "model_3d_step_plain": "pcf8574m.step",
      "lbr": "pcf8574m.lbr"
    },
    "distributor_links": {
      "lcsc": "C5310792"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T00:03:40Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "A0",
        "type": "input",
        "description": "Hardware address input 0; one of three address pins that set the device's I2C slave address (up to 8 devices on one bus)."
      },
      {
        "number": "2",
        "name": "A1",
        "type": "input",
        "description": "Hardware address input 1; one of three address pins that set the device's I2C slave address (up to 8 devices on one bus)."
      },
      {
        "number": "3",
        "name": "A2",
        "type": "input",
        "description": "Hardware address input 2; one of three address pins that set the device's I2C slave address (up to 8 devices on one bus)."
      },
      {
        "number": "4",
        "name": "P0",
        "type": "bidirectional",
        "description": "Quasi-bidirectional I/O 0; latched output with high current drive for directly driving LEDs, LOW-level output current 10 to 25 mA at VOL = 1 V and VDD = 5 V, and inputs should be HIGH before use."
      },
      {
        "number": "5",
        "name": "P1",
        "type": "bidirectional",
        "description": "Quasi-bidirectional I/O 1; latched output with high current drive for directly driving LEDs, LOW-level output current 10 to 25 mA at VOL = 1 V and VDD = 5 V, and inputs should be HIGH before use."
      },
      {
        "number": "6",
        "name": "P2",
        "type": "bidirectional",
        "description": "Quasi-bidirectional I/O 2; latched output with high current drive for directly driving LEDs, LOW-level output current 10 to 25 mA at VOL = 1 V and VDD = 5 V, and inputs should be HIGH before use."
      },
      {
        "number": "7",
        "name": "P3",
        "type": "bidirectional",
        "description": "Quasi-bidirectional I/O 3; latched output with high current drive for directly driving LEDs, LOW-level output current 10 to 25 mA at VOL = 1 V and VDD = 5 V, and inputs should be HIGH before use."
      },
      {
        "number": "8",
        "name": "VSS",
        "type": "power_in",
        "description": "Supply ground, the 0 V reference for the device (VSS = 0 V in the DC characteristics)."
      },
      {
        "number": "9",
        "name": "P4",
        "type": "bidirectional",
        "description": "Quasi-bidirectional I/O 4; latched output with high current drive for directly driving LEDs, LOW-level output current 10 to 25 mA at VOL = 1 V and VDD = 5 V, and inputs should be HIGH before use."
      },
      {
        "number": "10",
        "name": "P5",
        "type": "bidirectional",
        "description": "Quasi-bidirectional I/O 5; latched output with high current drive for directly driving LEDs, LOW-level output current 10 to 25 mA at VOL = 1 V and VDD = 5 V, and inputs should be HIGH before use."
      },
      {
        "number": "11",
        "name": "P6",
        "type": "bidirectional",
        "description": "Quasi-bidirectional I/O 6; latched output with high current drive for directly driving LEDs, LOW-level output current 10 to 25 mA at VOL = 1 V and VDD = 5 V, and inputs should be HIGH before use."
      },
      {
        "number": "12",
        "name": "P7",
        "type": "bidirectional",
        "description": "Quasi-bidirectional I/O 7; latched output with high current drive for directly driving LEDs, LOW-level output current 10 to 25 mA at VOL = 1 V and VDD = 5 V, and inputs should be HIGH before use."
      },
      {
        "number": "13",
        "name": "INT",
        "type": "output",
        "description": "Open-drain interrupt output, active LOW, that signals a change on the port inputs to the microcontroller; minimum LOW-level output current 1.6 mA at VOL = 0.4 V."
      },
      {
        "number": "14",
        "name": "SCL",
        "type": "input",
        "description": "I2C-bus serial clock line, up to 100 kHz, which must be pulled up to the positive supply through a resistor."
      },
      {
        "number": "15",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C-bus serial data line, which must be pulled up to the positive supply through a resistor and is pulled LOW by the device during acknowledge."
      },
      {
        "number": "16",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply voltage, 2.5 V to 6.0 V per the DC characteristics."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives one pin-table column shared by DIP-16, SOP-16, SOP-16W, QSOP-16 and TSSOP-16 (pi; The pin 1 orientation marker and the package drawing for SOP-16 are images that do not come through ; Pin types are assigned from the datasheet function descriptions: P0-P7 are quasi-bidirectional I/O, "
        ],
        "pages_sent": 18,
        "cost_usd": 0.0797,
        "at": "2026-11-13T00:03:26"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/4b90e43acbd9bf893744018942fdd643.pdf",
        "pages": 18,
        "sha256": "b4f2128e4d380a5d",
        "source_tier": "lcsc"
      },
      "cad": "land: KiCad official (CC-BY-SA 4.0); 3D: generated from the datasheet",
      "model_3d_generated": {
        "generator": "factory/gen_pkg3d.py",
        "family": "SOIC",
        "height_mm": 1.4500000000000002,
        "height_basis": "datasheet A, midpoint of min and max",
        "standoff_mm": 0.15,
        "standoff_basis": "family nominal (no datasheet A1 read)",
        "lead_width_mm": 0.36,
        "lead_width_basis": "default: 0.6 x pad width across the lead, at most 0.45 x pitch 1.27 mm; a tab 0.9 x its width (no datasheet b read)",
        "lead_thickness_mm": 0.2,
        "lead_thickness_basis": "default for pitch 1.27 mm, height 1.45 mm (no datasheet c read)"
      },
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pcf8574m.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.45
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "dd7608f7145a8ee659f5c6045d1b16c9eca482b13b379cc1b3115ef442bf5087",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pcf8574m-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.45
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "21b3e120c0798f07ce5f4a9cd5f1777c8ae59a75ac523e1127c5d24b4785f25f",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "SOP-16",
      "source_page": 14,
      "D": {
        "nom_mm": 9.9,
        "range_mm": [
          9.8,
          10.0
        ]
      },
      "E1": {
        "nom_mm": 3.9,
        "range_mm": [
          3.8,
          4.0
        ]
      },
      "E": {
        "nom_mm": 6.0,
        "range_mm": [
          5.8,
          6.2
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.45,
        "range_mm": [
          1.35,
          1.55
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "pcf8574m.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}