main
History Download
Ray Publish 0.1.0 26e8d89

PCF8574AP

HGSEMI · I/O Expanders · DIP-16

PCF8574AP from HGSEMI, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0 input Hardware address input 0, one of three pins used to set the device's I2C slave address (up to 8 devices, or 16 with PCF8574A).
2 A1 input Hardware address input 1, one of three pins used to set the device's I2C slave address (up to 8 devices, or 16 with PCF8574A).
3 A2 input Hardware address input 2, one of three pins used to set the device's I2C slave address (up to 8 devices, or 16 with PCF8574A).
4 P0 bidirectional Quasi-bidirectional I/O 0 with latched outputs; IOL is 10 to 25 mA at VOL = 1 V with VDD = 5 V, allowing direct LED drive.
5 P1 bidirectional Quasi-bidirectional I/O 1 with latched outputs; IOL is 10 to 25 mA at VOL = 1 V with VDD = 5 V, allowing direct LED drive.
6 P2 bidirectional Quasi-bidirectional I/O 2 with latched outputs; IOL is 10 to 25 mA at VOL = 1 V with VDD = 5 V, allowing direct LED drive.
7 P3 bidirectional Quasi-bidirectional I/O 3 with latched outputs; IOL is 10 to 25 mA at VOL = 1 V with VDD = 5 V, allowing direct LED drive.
8 VSS power_in Supply ground; the datasheet specifies VSS = 0 V for all DC characteristics.
9 P4 bidirectional Quasi-bidirectional I/O 4 with latched outputs; IOL is 10 to 25 mA at VOL = 1 V with VDD = 5 V, allowing direct LED drive.
10 P5 bidirectional Quasi-bidirectional I/O 5 with latched outputs; IOL is 10 to 25 mA at VOL = 1 V with VDD = 5 V, allowing direct LED drive.
11 P6 bidirectional Quasi-bidirectional I/O 6 with latched outputs; IOL is 10 to 25 mA at VOL = 1 V with VDD = 5 V, allowing direct LED drive.
12 P7 bidirectional Quasi-bidirectional I/O 7 with latched outputs; IOL is 10 to 25 mA at VOL = 1 V with VDD = 5 V, allowing direct LED drive.
13 INT output Open-drain interrupt output, active LOW, which signals the microcontroller when an input port changes; IOL minimum is 1.6 mA at VOL = 0.4 V.
14 SCL input Serial clock line of the I2C-bus, which requires a pull-up resistor to the positive supply and operates up to 100 kHz.
15 SDA bidirectional Serial data line of the I2C-bus, which requires a pull-up resistor to the positive supply and must be stable during the HIGH period of SCL.
16 VDD power_in Supply voltage, operating range 2.5 V to 6.0 V relative to VSS.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package DIP-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD supply voltage (absolute maximum) VDD -0.5 7 V 11
Input voltage (VSS - 0.5 to VDD + 0.5) VI -0.5 V 11
DC input current II 20 mA 11
DC output current IO 25 mA 11
Supply current IDD IDD 100 mA 11
Supply current ISS ISS 100 mA 11
Total power dissipation Ptot 400 mW 11
Power dissipation per output PO 100 mW 11
Storage temperature Tstg -65 150 ℃ 11
Operating ambient temperature Tamb -40 85 ℃ 11
Lead temperature (soldering) TL 260 ℃ Soldering, 10 seconds 11
VDD supply voltage (operating) VDD 2.5 6 V 11
IDD supply current (operating mode) IDD 40 100 µA operating mode; VDD = 6 V; no load; VI = VDD or VSS; fSCL = 100 kHz 11
Standby current Istb 2.5 10 µA standby mode; VDD = 6 V; no load; VI = VDD or VSS 11
Power-on reset voltage VPOR 1.3 2.4 V VDD = 6 V; no load; VI = VDD or VSS; note 1 11
LOW level input voltage (SCL, SDA) VIL -0.5 V 11
LOW level output current (SCL, SDA) IOL 3 mA VOL = 0.4 V 11
Leakage current (SCL, SDA) IL -1 1 µA VI = VDD or VSS 11
Input capacitance (SCL, SDA) Ci 7 pF VI = VSS 11
LOW level input voltage (I/Os) VIL -0.5 V 12
Maximum allowed input current through protection diode IIHL(max) 400 µA VI ≥ VDD or VI ≤ VSS 12
LOW level output current (I/Os) IOL 10 25 mA VOL = 1 V; VDD = 5 V 12
HIGH level output current (I/Os) IOH 30 300 µA VOH = VSS 12
Input capacitance (I/Os) Ci 10 pF 12
Output capacitance (I/Os) Co 10 pF 12
Output data valid tpv 4 µs CL ≤ 100 pF (see Figs 10 and 11) 12
Input data set-up time tsu 0 µs CL ≤ 100 pF (see Figs 10 and 11) 12
Input data hold time th 4 µs CL ≤ 100 pF (see Figs 10 and 11) 12
LOW level output current (INT) IOL 1.6 mA VOL = 0.4 V 12
Leakage current (INT) IL -1 1 µA VI = VDD or VSS 12
Input data valid time tiv 4 µs CL ≤ 100 pF 12
Reset delay time tir 4 µs CL ≤ 100 pF 12
LOW level input voltage (A0 to A2) VIL -0.5 V 12
Input leakage current (A0 to A2) ILI -250 250 nA pin at VDD or VSS 12
SCL clock frequency fSCL 100 kHz 13
Tolerable spike width on bus tSW 100 ns 13
Bus free time tBUF 4.7 µs 13
START condition set-up time tSU;STA 4.7 µs 13
START condition hold time tHD;STA 4 µs 13
SCL LOW time tLOW 4.7 µs 13
SCL HIGH time tHIGH 4 µs 13
SCL and SDA rise time tr 1 µs 13
SCL and SDA fall time tf 0.3 µs 13
Data set-up time tSU;DAT 250 ns 13
Data hold time tHD;DAT 0 ns 13
SCL LOW to data out valid tVD;DAT 3.4 µs 13
STOP condition set-up time tSU;STO 4 µs 13

CAD (KiCad official)

  • Symbol: PCF8574AP
  • Footprint: Package_DIP:DIP-16_W7.62mm
  • 3D model: DIP-16 (KiCad packages3D, STEP)
  • 3D model files: pcf8574ap-etched.step / pcf8574ap-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pcf8574ap.step / pcf8574ap.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (18 pp, sha256 b4f2128e4d380a5d, retrieved 2026-10-16, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF