Generated by kicad-footprint-generator · KiCad file format 20260206
PCAL9535APW
NXP Semicon · I/O Expanders · TSSOP-24
PCAL9535APW from NXP Semicon, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INT | output | Open-drain active LOW interrupt output that must be connected to VDD through a pull-up resistor. |
| 2 | A1 | input | Address input 1 that must be connected directly to VDD or VSS. |
| 3 | A2 | input | Address input 2 that must be connected directly to VDD or VSS. |
| 4 | P0_0 | bidirectional | Port 0 input/output 0, configured as a high-impedance input at power-up. |
| 5 | P0_1 | bidirectional | Port 0 input/output 1, configured as a high-impedance input at power-up. |
| 6 | P0_2 | bidirectional | Port 0 input/output 2, configured as a high-impedance input at power-up. |
| 7 | P0_3 | bidirectional | Port 0 input/output 3, configured as a high-impedance input at power-up. |
| 8 | P0_4 | bidirectional | Port 0 input/output 4, configured as a high-impedance input at power-up. |
| 9 | P0_5 | bidirectional | Port 0 input/output 5, configured as a high-impedance input at power-up. |
| 10 | P0_6 | bidirectional | Port 0 input/output 6, configured as a high-impedance input at power-up. |
| 11 | P0_7 | bidirectional | Port 0 input/output 7, configured as a high-impedance input at power-up. |
| 12 | VSS | power_in | Ground; must be connected to supply ground for proper device operation. |
| 13 | P1_0 | bidirectional | Port 1 input/output 0, configured as a high-impedance input at power-up. |
| 14 | P1_1 | bidirectional | Port 1 input/output 1, configured as a high-impedance input at power-up. |
| 15 | P1_2 | bidirectional | Port 1 input/output 2, configured as a high-impedance input at power-up. |
| 16 | P1_3 | bidirectional | Port 1 input/output 3, configured as a high-impedance input at power-up. |
| 17 | P1_4 | bidirectional | Port 1 input/output 4, configured as a high-impedance input at power-up. |
| 18 | P1_5 | bidirectional | Port 1 input/output 5, configured as a high-impedance input at power-up. |
| 19 | P1_6 | bidirectional | Port 1 input/output 6, configured as a high-impedance input at power-up. |
| 20 | P1_7 | bidirectional | Port 1 input/output 7, configured as a high-impedance input at power-up. |
| 21 | A0 | input | Address input 0 that must be connected directly to VDD or VSS. |
| 22 | SCL | input | Serial clock bus that must be connected to VDD through a pull-up resistor. |
| 23 | SDA | bidirectional | Serial data bus that must be connected to VDD through a pull-up resistor. |
| 24 | VDD | power_in | Supply voltage, operating range 1.65 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | TSSOP-24 |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD supply voltage | VDD | -0.5 | 6.5 | V | 25 | ||
| input voltage | VI | -0.5 | 6.5 | V | 25 | ||
| output voltage | VO | -0.5 | 6.5 | V | 25 | ||
| input clamping current | IIK | 20 | mA | A0, A1, A2, SCL; VI <0V | 25 | ||
| output clamping current | IOK | 20 | mA | INT; VO <0V | 25 | ||
| input/output clamping current | IIOK | 20 | mA | P port; VO < 0 V or VO >VDD | 25 | ||
| LOW-level output current | IOL | 50 | mA | continuous; I/O port | 25 | ||
| LOW-level output current | IOL | 25 | mA | continuous; SDA, INT | 25 | ||
| HIGH-level output current | IOH | 25 | mA | continuous; P port | 25 | ||
| supply current | IDD | 160 | mA | 25 | |||
| ground supply current | ISS | 200 | mA | 25 | |||
| total power dissipation | Ptot | 200 | mW | 25 | |||
| storage temperature | Tstg | -65 | 150 | C | 25 | ||
| maximum junction temperature | Tj(max) | 125 | C | 25 | |||
| supply voltage | VDD | 1.65 | 5.5 | V | 25 | ||
| HIGH-level input voltage SCL, SDA | VIH | 5.5 | V | min is 0.7 x VDD as printed; SCL, SDA | 25 | ||
| HIGH-level input voltage A0, A1, A2, P1_7 to P0_0 | VIH | 5.5 | V | min is 0.7 x VDD as printed; A0, A1, A2, P1_7 to P0_0 | 25 | ||
| LOW-level input voltage SCL, SDA | VIL | -0.5 | V | max is 0.3 x VDD as printed; SCL, SDA | 25 | ||
| LOW-level input voltage A0, A1, A2, P1_7 to P0_0 | VIL | -0.5 | V | max is 0.3 x VDD as printed; A0, A1, A2, P1_7 to P0_0 | 25 | ||
| HIGH-level output current | IOH | 10 | mA | P1_7 to P0_0 | 25 | ||
| LOW-level output current | IOL | 25 | mA | P1_7 to P0_0 | 25 | ||
| ambient temperature | Tamb | -40 | 85 | C | operating in free air | 25 | |
| transient thermal impedance junction to ambient | Zth(j-a) | 88 | K/W | TSSOP24 package | 25 | ||
| input clamping voltage | VIK | 1.2 | V | II = 18 mA | 26 | ||
| power-on reset voltage | VPOR | 1.1 | 1.4 | V | VI =VDD or VSS; IO = 0 mA | 26 | |
| HIGH-level output voltage | VOH | 1.2 | V | P port; IOH = 8 mA; CCX.X = 11b; VDD = 1.65 V | 26 | ||
| HIGH-level output voltage | VOH | 1.8 | V | P port; IOH = 8 mA; CCX.X = 11b; VDD = 2.3 V | 26 | ||
| HIGH-level output voltage | VOH | 2.6 | V | P port; IOH = 8 mA; CCX.X = 11b; VDD = 3 V | 26 | ||
| HIGH-level output voltage | VOH | 4.1 | V | P port; IOH = 8 mA; CCX.X = 11b; VDD = 4.5 V | 26 | ||
| LOW-level output voltage | VOL | 0.45 | V | P port; IOL = 8 mA; CCX.X = 11b; VDD = 1.65 V | 26 | ||
| LOW-level output voltage | VOL | 0.25 | V | P port; IOL = 8 mA; CCX.X = 11b; VDD = 2.3 V | 26 | ||
| LOW-level output voltage | VOL | 0.2 | V | P port; IOL = 8 mA; CCX.X = 11b; VDD = 4.5 V | 26 | ||
| LOW-level output current | IOL | 3 | mA | SDA; VOL = 0.4 V; VDD = 1.65 V to 5.5 V | 26 | ||
| LOW-level output current | IOL | 3 | 15 | mA | INT; VOL = 0.4 V; VDD = 1.65 V to 5.5 V | 26 | |
| input current | II | 1 | µA | SCL, SDA; VI =VDD or VSS; VDD = 1.65 V to 5.5 V | 26 | ||
| HIGH-level input current | IIH | 1 | µA | P port; VI =VDD; VDD = 1.65 V to 5.5 V | 26 | ||
| LOW-level input current | IIL | 1 | µA | P port; VI =VSS; VDD = 1.65 V to 5.5 V | 26 | ||
| supply current | IDD | 10 | 25 | µA | VDD = 3.6 V to 5.5 V; I/O = inputs; fSCL = 400 kHz; IO = 0 mA | 27 | |
| supply current | IDD | 6.5 | 15 | µA | VDD = 2.3 V to 3.6 V; I/O = inputs; fSCL = 400 kHz; IO = 0 mA | 27 | |
| supply current | IDD | 4 | 9 | µA | VDD = 1.65 V to 2.3 V; I/O = inputs; fSCL = 400 kHz; IO = 0 mA | 27 | |
| standby supply current | IDD | 1.5 | 7 | µA | VDD = 3.6 V to 5.5 V; I/O = inputs; fSCL = 0 kHz; IO = 0 mA | 27 | |
| standby supply current | IDD | 1 | 3.2 | µA | VDD = 2.3 V to 3.6 V; I/O = inputs; fSCL = 0 kHz; IO = 0 mA | 27 | |
| standby supply current | IDD | 0.5 | 1.7 | µA | VDD = 1.65 V to 2.3 V; I/O = inputs; fSCL = 0 kHz; IO = 0 mA | 27 | |
| active mode supply current | IDD | 60 | 125 | µA | VDD = 3.6 V to 5.5 V; fSCL = 400 kHz; continuous register read | 27 | |
| active mode supply current | IDD | 40 | 75 | µA | VDD = 2.3 V to 3.6 V; fSCL = 400 kHz; continuous register read | 27 | |
| active mode supply current | IDD | 20 | 45 | µA | VDD = 1.65 V to 2.3 V; fSCL = 400 kHz; continuous register read | 27 | |
| supply current with pull-ups enabled | IDD | 1.1 | 1.5 | mA | VDD = 1.65 V to 5.5 V; I/O = inputs with pull-up enabled; fSCL = 0 kHz | 27 | |
| input capacitance | Ci | 6 | 7 | pF | VI =VDD or VSS; VDD = 1.65 V to 5.5 V | 27 | |
| input/output capacitance | Cio | 7 | 8 | pF | VI/O =VDD or VSS; VDD = 1.65 V to 5.5 V | 27 | |
| internal pull-up resistance | Rpu(int) | 50 | 100 | 150 | kΩ | input/output | 27 |
| internal pull-down resistance | Rpd(int) | 50 | 100 | 150 | kΩ | input/output | 27 |
| SCL clock frequency | fSCL | 0 | 400 | kHz | Fast-mode I2C-bus | 32 | |
| HIGH period of the SCL clock | tHIGH | 0.6 | µs | Fast-mode I2C-bus | 32 | ||
| LOW period of the SCL clock | tLOW | 1.3 | µs | Fast-mode I2C-bus | 32 | ||
| bus free time between a STOP and START condition | tBUF | 1.3 | µs | Fast-mode I2C-bus | 32 | ||
| data valid time SCL LOW to SDA output valid | tVD;DAT | 0.9 | µs | Fast-mode I2C-bus | 32 |
CAD (KiCad official)
- Symbol:
PCAL9535APW - Footprint:
Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm - 3D model: TSSOP-24 (KiCad packages3D, STEP)
- 3D model files:
pcal9535apw-etched.step/pcal9535apw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pcal9535apw.step/pcal9535apw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (46 pp, sha256
eb77648442dfaa25, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).