main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs pca9555rger: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pca9555rger: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Brief states the pinout check that actually ran (was an unconditional "Datasheet-verified pinout") · Ray
pca9555rger-etched.fit.json pca9555rger: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pca9555rger-etched.glb pca9555rger: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pca9555rger-etched.step pca9555rger: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pca9555rger.glb Publish 0.1.0 · Ray
pca9555rger.kicad_mod Publish 0.1.0 · Ray
pca9555rger.kicad_sym Publish 0.1.0 · Ray
pca9555rger.lbr Publish 0.1.0 · Ray
pca9555rger.step Publish 0.1.0 · Ray
README.md Initial commit: component/pca9555rger · Ray

PCA9555RGER

Texas Instruments · I/O Expanders · VQFN-24-EP(4x4)

PCA9555RGER from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P00 bidirectional P-port 0 input/output, configurable as input (0 to 5.5V) or push-pull output (25mA sink, 10mA source capability).
2 P01 bidirectional P-port 1 input/output, configurable as input (0 to 5.5V) or push-pull output (25mA sink, 10mA source capability).
3 P02 bidirectional P-port 2 input/output, configurable as input (0 to 5.5V) or push-pull output (25mA sink, 10mA source capability).
4 P03 bidirectional P-port 3 input/output, configurable as input (0 to 5.5V) or push-pull output (25mA sink, 10mA source capability).
5 P04 bidirectional P-port 4 input/output, configurable as input (0 to 5.5V) or push-pull output (25mA sink, 10mA source capability).
6 P05 bidirectional P-port 5 input/output, configurable as input (0 to 5.5V) or push-pull output (25mA sink, 10mA source capability).
7 P06 bidirectional P-port 6 input/output, configurable as input (0 to 5.5V) or push-pull output (25mA sink, 10mA source capability).
8 P07 bidirectional P-port 7 input/output, configurable as input (0 to 5.5V) or push-pull output (25mA sink, 10mA source capability).
9 GND power_in Ground, 0V reference.
10 P10 bidirectional P-port 10 input/output, configurable as input (0 to 5.5V) or push-pull output (25mA sink, 10mA source capability).
11 P11 bidirectional P-port 11 input/output, configurable as input (0 to 5.5V) or push-pull output (25mA sink, 10mA source capability).
12 P12 bidirectional P-port 12 input/output, configurable as input (0 to 5.5V) or push-pull output (25mA sink, 10mA source capability).
13 P13 bidirectional P-port 13 input/output, configurable as input (0 to 5.5V) or push-pull output (25mA sink, 10mA source capability).
14 P14 bidirectional P-port 14 input/output, configurable as input (0 to 5.5V) or push-pull output (25mA sink, 10mA source capability).
15 P15 bidirectional P-port 15 input/output, configurable as input (0 to 5.5V) or push-pull output (25mA sink, 10mA source capability).
16 P16 bidirectional P-port 16 input/output, configurable as input (0 to 5.5V) or push-pull output (25mA sink, 10mA source capability).
17 P17 bidirectional P-port 17 input/output, configurable as input (0 to 5.5V) or push-pull output (25mA sink, 10mA source capability).
18 A0 input I2C slave address input, connect directly to VCC or ground per Table 8-2 to program device address, must not change during I2C communication.
19 SCL bidirectional I2C serial clock line, open-drain output with 3mA sink capability at VOL=0.4V, requires external pullup resistor to VCC, supports 0 to 400kHz operation.
20 SDA bidirectional I2C serial data line, open-drain output with 3mA sink capability at VOL=0.4V, requires external pullup resistor to VCC, supports 0 to 400kHz operation.
21 VCC power_in Supply voltage input, 2.3V to 5.5V nominal operating range, typical quiescent current 100 to 200µA at 5.5V with no load.
22 INT output Active-low open-drain interrupt output, asserts when input port state differs from Input Port register value, 3mA sink capability at VOL=0.4V, requires external pullup resistor to VCC.
23 A1 input I2C slave address input, connect directly to VCC or ground per Table 8-2 to program device address, must not change during I2C communication.
24 A2 input I2C slave address input, connect directly to VCC or ground per Table 8-2 to program device address, must not change during I2C communication.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-24-EP(4x4)
Category Interface
Pins 25

CAD (KiCad official)

  • Symbol: PCA9555RGER
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: pca9555rger-etched.step / pca9555rger-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pca9555rger.step / pca9555rger.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (49 pp, sha256 f82351ef5c7f9c9c, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF