main
Ray pca9554argtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 11196ad
{
  "slug": "pca9554argtr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments I/O Expanders, QFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "pca9554argtr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pca9554argtr.kicad_sym",
    "pca9554argtr.kicad_mod",
    "pca9554argtr.glb",
    "pca9554argtr.step",
    "pca9554argtr.lbr",
    "docs/hero.png",
    "docs/pca9554argtr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "PCA9554ARGTR",
    "manufacturer": "Texas Instruments",
    "package": "QFN-16-EP(3x3)",
    "pin_count": 17,
    "category": "Interface",
    "subcategory": "I/O Expanders",
    "datasheet": "https://www.ti.com/lit/ds/symlink/pca9554a.pdf",
    "parts": {
      "symbol": "pca9554argtr.kicad_sym",
      "footprint": "pca9554argtr.kicad_mod",
      "model_3d": "pca9554argtr-etched.glb",
      "model_3d_plain": "pca9554argtr.glb",
      "model_3d_step": "pca9554argtr-etched.step",
      "model_3d_step_plain": "pca9554argtr.step",
      "lbr": "pca9554argtr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2655461",
      "digikey": "296-24733-2-ND",
      "mouser": "595-PCA9554ARGTR"
    },
    "distributor_check": {
      "checked_at": "2026-09-27T07:42:21Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-24733-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-PCA9554ARGTR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "A2",
        "type": "input",
        "description": "Address input; connect directly to VCC or ground."
      },
      {
        "number": "2",
        "name": "P0",
        "type": "bidirectional",
        "description": "P-port input/output; push-pull design structure."
      },
      {
        "number": "3",
        "name": "P1",
        "type": "bidirectional",
        "description": "P-port input/output; push-pull design structure."
      },
      {
        "number": "4",
        "name": "P2",
        "type": "bidirectional",
        "description": "P-port input/output; push-pull design structure."
      },
      {
        "number": "5",
        "name": "P3",
        "type": "bidirectional",
        "description": "P-port input/output; push-pull design structure."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "7",
        "name": "P4",
        "type": "bidirectional",
        "description": "P-port input/output; push-pull design structure."
      },
      {
        "number": "8",
        "name": "P5",
        "type": "bidirectional",
        "description": "P-port input/output; push-pull design structure."
      },
      {
        "number": "9",
        "name": "P6",
        "type": "bidirectional",
        "description": "P-port input/output; push-pull design structure."
      },
      {
        "number": "10",
        "name": "P7",
        "type": "bidirectional",
        "description": "P-port input/output; push-pull design structure."
      },
      {
        "number": "11",
        "name": "INT",
        "type": "tri_state",
        "description": "Interrupt output (open-drain); connect to VCC through a pullup resistor."
      },
      {
        "number": "12",
        "name": "SCL",
        "type": "bidirectional",
        "description": "Serial clock bus; connect to VCC through a pullup resistor."
      },
      {
        "number": "13",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Serial data bus; connect to VCC through a pullup resistor."
      },
      {
        "number": "14",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage."
      },
      {
        "number": "15",
        "name": "A0",
        "type": "input",
        "description": "Address input; connect directly to VCC or ground."
      },
      {
        "number": "16",
        "name": "A1",
        "type": "input",
        "description": "Address input; connect directly to VCC or ground."
      },
      {
        "number": "17",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "exposed pad 17 added from the footprint"
        ],
        "pages_sent": 42,
        "cost_usd": 0.3422,
        "at": "2026-09-27T07:42:05"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/pca9554a.pdf",
        "pages": 42,
        "sha256": "73abe48bc529881d",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pca9554argtr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pca9554argtr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ea5bb4eb2e3925451a97fcc6ced844dc043a1de1be3ff07f3310229f6e3c1898",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}