main
Ray
Publish 0.1.0
6832f12
PCA9554ADWR
Texas Instruments · I/O Expanders · SOIC-16-300mil
PCA9554ADWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Address input that must connect directly to VCC or ground; logic-high input threshold is 2 V minimum and logic-low is 0.3 × VCC maximum. |
| 2 | A1 | input | Address input that must connect directly to VCC or ground; logic-high input threshold is 2 V minimum and logic-low is 0.3 × VCC maximum. |
| 3 | A2 | input | Address input that must connect directly to VCC or ground; logic-high input threshold is 2 V minimum and logic-low is 0.3 × VCC maximum. |
| 4 | P0 | bidirectional | P-port input/output with push-pull structure; IOL is limited to 25 mA and IOH to -10 mA for P7-P0. |
| 5 | P1 | bidirectional | P-port input/output with push-pull structure; IOL is limited to 25 mA and IOH to -10 mA for P7-P0. |
| 6 | P2 | bidirectional | P-port input/output with push-pull structure; IOL is limited to 25 mA and IOH to -10 mA for P7-P0. |
| 7 | P3 | bidirectional | P-port input/output with push-pull structure; IOL is limited to 25 mA and IOH to -10 mA for P7-P0. |
| 8 | GND | power_in | Ground reference for the device. |
| 9 | P4 | bidirectional | P-port input/output with push-pull structure; IOL is limited to 25 mA and IOH to -10 mA for P7-P0. |
| 10 | P5 | bidirectional | P-port input/output with push-pull structure; IOL is limited to 25 mA and IOH to -10 mA for P7-P0. |
| 11 | P6 | bidirectional | P-port input/output with push-pull structure; IOL is limited to 25 mA and IOH to -10 mA for P7-P0. |
| 12 | P7 | bidirectional | P-port input/output with push-pull structure; IOL is limited to 25 mA and IOH to -10 mA for P7-P0. |
| 13 | INT | output | Open-drain, active-low interrupt output that must be connected to VCC through a pullup resistor. |
| 14 | SCL | input | I2C serial clock bus that must be connected to VCC through a pullup resistor; input high threshold is 0.7 × VCC minimum. |
| 15 | SDA | bidirectional | I2C serial data bus that must be connected to VCC through a pullup resistor; input high threshold is 0.7 × VCC minimum. |
| 16 | VCC | power_in | Supply voltage with a recommended operating range of 2.3 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Interface |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
PCA9554ADWR - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
pca9554adwr-etched.step/pca9554adwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pca9554adwr.step/pca9554adwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
6104cd12b57d2d07, retrieved 2026-10-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PCA9554ADWR
**Texas Instruments** · I/O Expanders · SOIC-16-300mil
PCA9554ADWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Address input that must connect directly to VCC or ground; logic-high input threshold is 2 V minimum and logic-low is 0.3 × VCC maximum. |
| 2 | A1 | input | Address input that must connect directly to VCC or ground; logic-high input threshold is 2 V minimum and logic-low is 0.3 × VCC maximum. |
| 3 | A2 | input | Address input that must connect directly to VCC or ground; logic-high input threshold is 2 V minimum and logic-low is 0.3 × VCC maximum. |
| 4 | P0 | bidirectional | P-port input/output with push-pull structure; IOL is limited to 25 mA and IOH to -10 mA for P7-P0. |
| 5 | P1 | bidirectional | P-port input/output with push-pull structure; IOL is limited to 25 mA and IOH to -10 mA for P7-P0. |
| 6 | P2 | bidirectional | P-port input/output with push-pull structure; IOL is limited to 25 mA and IOH to -10 mA for P7-P0. |
| 7 | P3 | bidirectional | P-port input/output with push-pull structure; IOL is limited to 25 mA and IOH to -10 mA for P7-P0. |
| 8 | GND | power_in | Ground reference for the device. |
| 9 | P4 | bidirectional | P-port input/output with push-pull structure; IOL is limited to 25 mA and IOH to -10 mA for P7-P0. |
| 10 | P5 | bidirectional | P-port input/output with push-pull structure; IOL is limited to 25 mA and IOH to -10 mA for P7-P0. |
| 11 | P6 | bidirectional | P-port input/output with push-pull structure; IOL is limited to 25 mA and IOH to -10 mA for P7-P0. |
| 12 | P7 | bidirectional | P-port input/output with push-pull structure; IOL is limited to 25 mA and IOH to -10 mA for P7-P0. |
| 13 | INT | output | Open-drain, active-low interrupt output that must be connected to VCC through a pullup resistor. |
| 14 | SCL | input | I2C serial clock bus that must be connected to VCC through a pullup resistor; input high threshold is 0.7 × VCC minimum. |
| 15 | SDA | bidirectional | I2C serial data bus that must be connected to VCC through a pullup resistor; input high threshold is 0.7 × VCC minimum. |
| 16 | VCC | power_in | Supply voltage with a recommended operating range of 2.3 V to 5.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Interface |
| Pins | 16 |
## CAD (KiCad official)
- Symbol: `PCA9554ADWR`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files: `pca9554adwr-etched.step` / `pca9554adwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pca9554adwr.step` / `pca9554adwr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/pca9554a) (42 pp, sha256 `6104cd12b57d2d07`, retrieved 2026-10-12, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pca9554adwr-datasheet.pdf)