main
History Download
Ray Publish 0.1.0 8b884fe

PCA9552PW

NXP Semicon · LED Drivers · TSSOP-24

PCA9552PW from NXP Semicon, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0 input Hardware address input 0; it has no internal pull-up and must be pulled HIGH or LOW.
2 A1 input Hardware address input 1; it has no internal pull-up and must be pulled HIGH or LOW.
3 A2 input Hardware address input 2; it has no internal pull-up and must be pulled HIGH or LOW.
4 LED0 output LED driver 0, an open-drain output that directly drives an LED and can sink up to 25 mA per bit.
5 LED1 output LED driver 1, an open-drain output that directly drives an LED and can sink up to 25 mA per bit.
6 LED2 output LED driver 2, an open-drain output that directly drives an LED and can sink up to 25 mA per bit.
7 LED3 output LED driver 3, an open-drain output that directly drives an LED and can sink up to 25 mA per bit.
8 LED4 output LED driver 4, an open-drain output that directly drives an LED and can sink up to 25 mA per bit.
9 LED5 output LED driver 5, an open-drain output that directly drives an LED and can sink up to 25 mA per bit.
10 LED6 output LED driver 6, an open-drain output that directly drives an LED and can sink up to 25 mA per bit.
11 LED7 output LED driver 7, an open-drain output that directly drives an LED and can sink up to 25 mA per bit.
12 VSS power_in Ground supply; it must be connected to supply ground for proper device operation.
13 LED8 output LED driver 8, an open-drain output that directly drives an LED and can sink up to 25 mA per bit.
14 LED9 output LED driver 9, an open-drain output that directly drives an LED and can sink up to 25 mA per bit.
15 LED10 output LED driver 10, an open-drain output that directly drives an LED and can sink up to 25 mA per bit.
16 LED11 output LED driver 11, an open-drain output that directly drives an LED and can sink up to 25 mA per bit.
17 LED12 output LED driver 12, an open-drain output that directly drives an LED and can sink up to 25 mA per bit.
18 LED13 output LED driver 13, an open-drain output that directly drives an LED and can sink up to 25 mA per bit.
19 LED14 output LED driver 14, an open-drain output that directly drives an LED and can sink up to 25 mA per bit.
20 LED15 output LED driver 15, an open-drain output that directly drives an LED and can sink up to 25 mA per bit.
21 RESET input Active LOW reset input that initializes the registers to their default state.
22 SCL input Serial clock line of the I2C-bus interface.
23 SDA bidirectional Serial data line of the I2C-bus interface.
24 VDD power_in Supply voltage for the device.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package TSSOP-24
Category Display Modules / LED Drivers / Display Drivers
Pins 24

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD supply voltage (absolute maximum) VDD -0.5 6 V 13
VI/O voltage on an input/output pin VI/O 5.5 V LEDn used as an I/O 13
Output current on pin LEDn IO(LEDn) -25 25 mA LEDn used as an I/O 13
Ground supply current ISS 200 mA 13
Total power dissipation Ptot 400 mW 13
Storage temperature Tstg -65 150 °C 13
Ambient temperature operating Tamb -40 85 °C operating 13
VDD supply voltage (operating range) VDD 2.3 5.5 V 13
Operating supply current IDD 350 550 μA Operating mode; VDD = 5.5 V; no load; VI = VDD or VSS; fSCL = 100 kHz 13
Standby current Istb 2.1 5 μA Standby mode; VDD = 5.5 V; no load; VI = VDD or VSS; fSCL = 0 kHz 13
Additional standby current ΔIstb 2 mA Standby mode; VDD = 5.5 V; every LED I/O at VI = 4.3 V; fSCL = 0 kHz 13
Power-on reset voltage VPOR 1.7 2.2 V VDD = 3.3 V; no load; VI = VDD or VSS 13
LOW-level input voltage (SCL, SDA) VIL -0.5 V 13
HIGH-level input voltage (SCL, SDA) VIH 5.5 V 13
LOW-level output current (SDA) IOL 3 6.5 mA VOL = 0.4 V 13
Leakage current (SCL, SDA) IL -1 1 μA VI = VDD = VSS 13
Input capacitance (SCL, SDA) Ci 4.4 5 pF VI = VSS 13
LOW-level input voltage (I/Os) VIL -0.5 0.8 V 13
HIGH-level input voltage (I/Os) VIH 2 5.5 V 13
LOW-level output current (I/Os) IOL 9 mA VOL = 0.4 V; VDD = 2.3 V 13
LOW-level output current (I/Os) IOL 12 mA VOL = 0.4 V; VDD = 3.0 V 13
LOW-level output current (I/Os) IOL 15 mA VOL = 0.4 V; VDD = 5.0 V 13
LOW-level output current (I/Os) IOL 20 mA VOL = 0.7 V; VDD = 3.0 V 14
LOW-level output current (I/Os) IOL 25 mA VOL = 0.7 V; VDD = 5.0 V 14
Input leakage current (I/Os) ILI -1 1 μA VDD = 3.6 V; VI = 0 V or VDD 14
Input/output capacitance (I/Os) Cio 2.6 5 pF 14
LOW-level input voltage (A0, A1, A2, RESET) VIL -0.5 0.8 V 14
HIGH-level input voltage (A0, A1, A2, RESET) VIH 2 5.5 V 14
Input leakage current (A0, A1, A2, RESET) ILI -1 1 μA 14
Input capacitance (A0, A1, A2, RESET) Ci 2.3 5 pF VI = VSS 14
Pulse width of spikes suppressed by input filter (Standard and Fast mode) tSP 50 ns 15
Data output valid time (Standard and Fast mode) tv(Q) 250 ns 15
Data input setup time (Standard and Fast mode) tsu(D) 100 ns 15
Data input hold time (Standard and Fast mode) th(D) 1 μs 15
Reset pulse width (Standard and Fast mode) tw(rst) 10 ns 15
Reset recovery time (Standard and Fast mode) trec(rst) 0 ns 15
Reset time (Standard and Fast mode) trst 400 ns 15
SCL clock frequency (Fast mode I2C-bus) fSCL 0 400 kHz 14
Bus free time between STOP and START (Fast mode I2C-bus) tBUF 1.3 μs 14
Hold time repeated START (Fast mode I2C-bus) tHD;STA 0.6 μs 15
Set-up time repeated START (Fast mode I2C-bus) tSU;STA 0.6 μs 15
Set-up time STOP condition (Fast mode I2C-bus) tSU;STO 0.6 μs 15
Data hold time (Fast mode I2C-bus) tHD;DAT 0 ns 15
Data valid acknowledge time (Fast mode I2C-bus) tVD;ACK 600 ns 15
Data valid time LOW-level (Fast mode I2C-bus) tVD;DAT 600 ns 15
Data valid time HIGH-level (Fast mode I2C-bus) tVD;DAT 600 ns 15
Data set-up time (Fast mode I2C-bus) tSU;DAT 100 ns 15
LOW period of the SCL clock (Fast mode I2C-bus) tLOW 1.3 μs 15
HIGH period of the SCL clock (Fast mode I2C-bus) tHIGH 0.6 μs 15
Fall time of SDA and SCL (Fast mode I2C-bus) tf 300 ns 15
Rise time of SDA and SCL (Fast mode I2C-bus) tr 300 ns 15
SCL clock frequency (Standard mode I2C-bus) fSCL 0 100 kHz 14
Bus free time between STOP and START (Standard mode I2C-bus) tBUF 4.7 μs 14
Hold time repeated START (Standard mode I2C-bus) tHD;STA 4 μs 15
Set-up time repeated START (Standard mode I2C-bus) tSU;STA 4.7 μs 15
Set-up time STOP condition (Standard mode I2C-bus) tSU;STO 4 μs 15
LOW period of the SCL clock (Standard mode I2C-bus) tLOW 4.7 μs 15
HIGH period of the SCL clock (Standard mode I2C-bus) tHIGH 4 μs 15
Data set-up time (Standard mode I2C-bus) tSU;DAT 250 ns 15

CAD (KiCad official)

  • Symbol: PCA9552PW
  • Footprint: Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm
  • 3D model: TSSOP-24 (KiCad packages3D, STEP)
  • 3D model files: pca9552pw-etched.step / pca9552pw-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pca9552pw.step / pca9552pw.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (28 pp, sha256 60c6c92d3101036a, retrieved 2026-11-04, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF