Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PCA9551D

NXP Semicon · LED Drivers · SO-16-150mil

PCA9551D from NXP Semicon, in a SO-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0 input Hardware address input 0 sets the device's slave address and must be pulled HIGH or LOW because no internal pull-up resistor is fitted.
2 A1 input Hardware address input 1 sets the device's slave address and must be pulled HIGH or LOW because no internal pull-up resistor is fitted.
3 A2 input Hardware address input 2 sets the device's slave address and must be pulled HIGH or LOW because no internal pull-up resistor is fitted.
4 LED0 bidirectional LED driver 0 is an open-drain output rated to sink up to 25 mA, and it can also be used as a GPIO when not driving an LED.
5 LED1 bidirectional LED driver 1 is an open-drain output rated to sink up to 25 mA, and it can also be used as a GPIO when not driving an LED.
6 LED2 bidirectional LED driver 2 is an open-drain output rated to sink up to 25 mA, and it can also be used as a GPIO when not driving an LED.
7 LED3 bidirectional LED driver 3 is an open-drain output rated to sink up to 25 mA, and it can also be used as a GPIO when not driving an LED.
8 VSS power_in Supply ground; it must be connected to the supply ground for proper device operation.
9 LED4 bidirectional LED driver 4 is an open-drain output rated to sink up to 25 mA, and it can also be used as a GPIO when not driving an LED.
10 LED5 bidirectional LED driver 5 is an open-drain output rated to sink up to 25 mA, and it can also be used as a GPIO when not driving an LED.
11 LED6 bidirectional LED driver 6 is an open-drain output rated to sink up to 25 mA, and it can also be used as a GPIO when not driving an LED.
12 LED7 bidirectional LED driver 7 is an open-drain output rated to sink up to 25 mA, and it can also be used as a GPIO when not driving an LED.
13 RESET input Active LOW reset input that initializes the registers to their default state, all zeroes, when pulled LOW.
14 SCL input I2C-bus serial clock line with a noise filter, operating from 0 Hz to 400 kHz.
15 SDA bidirectional I2C-bus serial data line with a noise filter, operating from 0 Hz to 400 kHz.
16 VDD power_in Supply voltage with an operating range of 2.3 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package SO-16-150mil
Category Display Modules / LED Drivers / Display Drivers
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
supply voltage VDD -0.5 6 V 12
voltage on an input/output pin VI/O 5.5 V min printed as VSS − 0.5 12
output current on pin LEDn IO(LEDn) 25 mA printed as ±25 mA 12
ground supply current ISS 100 mA 12
total power dissipation Ptot 400 mW 12
storage temperature Tstg -65 150 °C 12
ambient temperature operating Tamb -40 85 °C operating 12
supply voltage VDD 2.3 5.5 V 13
supply current IDD 350 500 µA operating mode; VDD = 5.5 V; VI =VDD or VSS; fSCL = 100 kHz 13
standby current Istb 1.9 3 µA Standby mode; VDD = 5.5 V; VI =VDD or VSS; fSCL = 0 kHz 13
additional quiescent supply current ∆IDD 800 µA Standby mode; VDD = 5.5 V; every LED I/O at VI = 4.3 V; fSCL = 0 kHz 13
power-on reset voltage VPOR 1.7 2.2 V no load; VI =VDD or VSS 13
LOW-level input voltage SCL, SDA VIL -0.5 V Input SCL; input/output SDA; max printed as +0.3VDD 13
HIGH-level input voltage SCL, SDA VIH 5.5 V Input SCL; input/output SDA; min printed as 0.7VDD 13
LOW-level output current SDA IOL 3 6.5 mA VOL = 0.4 V 13
leakage current SCL, SDA IL -1 1 µA VI =VDD =VSS 13
input capacitance SCL Ci 3.7 5 pF VI =VSS 13
LOW-level input voltage I/Os VIL -0.5 0.8 V 13
HIGH-level input voltage I/Os VIH 2 5.5 V 13
LOW-level output current I/Os IOL 6 9 mA VOL = 0.4 V; VDD = 2.3 V [3] 13
LOW-level output current I/Os IOL 8 11 mA VOL = 0.4 V; VDD = 3.0 V [3] 13
LOW-level output current I/Os IOL 10 14 mA VOL = 0.4 V; VDD = 5.0 V [3] 13
LOW-level output current I/Os IOL 11 14 mA VOL = 0.7 V; VDD = 2.3 V [3] 13
LOW-level output current I/Os IOL 14 18 mA VOL = 0.7 V; VDD = 3.0 V [3] 13
LOW-level output current I/Os IOL 17 24 mA VOL = 0.7 V; VDD = 5.0 V [3] 13
input leakage current I/Os ILI -1 1 µA VDD = 3.6 V; VI = 0 V or VDD 13
input/output capacitance Cio 2.1 5 pF 13
LOW-level input voltage A0, A1, A2, RESET VIL -0.5 0.8 V 13
HIGH-level input voltage A0, RESET VIH 2 5.5 V A0; RESET 13
HIGH-level input voltage A1, A2 VIH 2 V A1; A2; max printed as VDD + 0.5 13
input leakage current select inputs ILI -1 1 µA 13
input capacitance select inputs Ci 2.3 5 pF 13
SCL clock frequency fSCL 0 100 kHz Standard-mode I2C-bus 15
SCL clock frequency fSCL 0 400 kHz Fast-mode I2C-bus 15
bus free time between a STOP and START condition tBUF 4.7 µs Standard-mode I2C-bus 15
bus free time between a STOP and START condition tBUF 1.3 µs Fast-mode I2C-bus 15
hold time (repeated) START condition tHD;STA 4 µs Standard-mode I2C-bus 15
hold time (repeated) START condition tHD;STA 0.6 µs Fast-mode I2C-bus 15
set-up time for a repeated START condition tSU;STA 4.7 µs Standard-mode I2C-bus 15
set-up time for a repeated START condition tSU;STA 0.6 µs Fast-mode I2C-bus 15
set-up time for STOP condition tSU;STO 4 µs Standard-mode I2C-bus 15
set-up time for STOP condition tSU;STO 0.6 µs Fast-mode I2C-bus 15
data hold time tHD;DAT 0 ns Standard-mode I2C-bus 15
LOW period of the SCL clock tLOW 4.7 µs Standard-mode I2C-bus 15
LOW period of the SCL clock tLOW 1.3 µs Fast-mode I2C-bus 15
HIGH period of the SCL clock tHIGH 4 µs Standard-mode I2C-bus 15
HIGH period of the SCL clock tHIGH 0.6 µs Fast-mode I2C-bus 15
data set-up time tSU;DAT 250 ns Standard-mode I2C-bus 15
data set-up time tSU;DAT 100 ns Fast-mode I2C-bus 15
rise time of both SDA and SCL signals tr 1000 ns Standard-mode I2C-bus 15
rise time of both SDA and SCL signals tr 300 ns Fast-mode I2C-bus; min printed as 20 + 0.1Cb [3] 15
fall time of both SDA and SCL signals tf 300 ns Standard-mode I2C-bus 15
reset pulse width tw(rst) 8 ns Standard-mode I2C-bus 15
reset recovery time trec(rst) 0 ns Standard-mode I2C-bus 15
reset time trst 400 ns Standard-mode I2C-bus 15

CAD (KiCad official)

  • Symbol: PCA9551D
  • Footprint: Package_SO:SO-16_3.9x9.9mm_P1.27mm
  • 3D model: SO-16-150mil (KiCad packages3D, STEP)
  • 3D model files: pca9551d-etched.step / pca9551d-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pca9551d.step / pca9551d.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (26 pp, sha256 06eed5605dc2a71f, retrieved 2026-11-20)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF