← Commit history

Initial commit: component/pca9548arger

Ray ·b4ea708028 ·
2 files changed +323
README.mdadded+62
@@ -0,0 +1,62 @@+# PCA9548ARGER++**Texas Instruments** · Interface - Specialized · VQFN-24(4x4)++PCA9548ARGER from Texas Instruments, in a VQFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SD0 | bidirectional | Serial data 0. Connect to VCC through a pull-up resistor. |+| 2 | SC0 | bidirectional | Serial clock 0. Connect to VCC through a pull-up resistor. |+| 3 | SD1 | bidirectional | Serial data 1. Connect to VCC through a pull-up resistor. |+| 4 | SC1 | bidirectional | Serial clock 1. Connect to VCC through a pull-up resistor. |+| 5 | SD2 | bidirectional | Serial data 2. Connect to VCC through a pull-up resistor. |+| 6 | SC2 | bidirectional | Serial clock 2. Connect to VCC through a pull-up resistor. |+| 7 | SD3 | bidirectional | Serial data 3. Connect to VCC through a pull-up resistor. |+| 8 | SC3 | bidirectional | Serial clock 3. Connect to VCC through a pull-up resistor. |+| 9 | GND | power_in | Ground. |+| 10 | SD4 | bidirectional | Serial data 4. Connect to VCC through a pull-up resistor. |+| 11 | SC4 | bidirectional | Serial clock 4. Connect to VCC through a pull-up resistor. |+| 12 | SD5 | bidirectional | Serial data 5. Connect to VCC through a pull-up resistor. |+| 13 | SC5 | bidirectional | Serial clock 5. Connect to VCC through a pull-up resistor. |+| 14 | SD6 | bidirectional | Serial data 6. Connect to VCC through a pull-up resistor. |+| 15 | SC6 | bidirectional | Serial clock 6. Connect to VCC through a pull-up resistor. |+| 16 | SD7 | bidirectional | Serial data 7. Connect to VCC through a pull-up resistor. |+| 17 | SC7 | bidirectional | Serial clock 7. Connect to VCC through a pull-up resistor. |+| 18 | A2 | input | Address input 2. Connect directly to VCC or ground. |+| 19 | SCL | bidirectional | Serial clock bus. Connect to VCC through a pull-up resistor. |+| 20 | SDA | bidirectional | Serial data bus. Connect to VCC through a pull-up resistor. |+| 21 | VCC | power_in | Supply voltage. |+| 22 | A0 | input | Address input 0. Connect directly to VCC or ground. |+| 23 | A1 | input | Address input 1. Connect directly to VCC or ground. |+| 24 | RESET | input | Active-low reset input. Connect to VCC through a pull-up resistor, if not used. |+| 25 | PAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-24(4x4) |+| Category | Interface |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `PCA9548ARGER`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`+- 3D model: VQFN-24(4x4) (KiCad packages3D, STEP)+- 3D model files: `pca9548arger-etched.step` / `pca9548arger-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pca9548arger.step` / `pca9548arger.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/pca9548a) (46 pp, sha256 `0ad97d70ad4250c5`, retrieved 2026-09-27, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/pca9548arger-datasheet.pdf)
page.jsonadded+261
@@ -0,0 +1,261 @@+{+  "slug": "pca9548arger",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Interface - Specialized, VQFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "pca9548arger",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "pca9548arger.kicad_sym",+    "pca9548arger.kicad_mod",+    "pca9548arger.glb",+    "pca9548arger.step",+    "pca9548arger.lbr",+    "docs/hero.png",+    "docs/pca9548arger-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "PCA9548ARGER",+    "manufacturer": "Texas Instruments",+    "package": "VQFN-24(4x4)",+    "pin_count": 25,+    "category": "Interface",+    "subcategory": "Interface - Specialized",+    "datasheet": "https://www.ti.com/cn/lit/gpn/pca9548a",+    "parts": {+      "symbol": "pca9548arger.kicad_sym",+      "footprint": "pca9548arger.kicad_mod",+      "model_3d": "pca9548arger-etched.glb",+      "model_3d_plain": "pca9548arger.glb",+      "model_3d_step": "pca9548arger-etched.step",+      "model_3d_step_plain": "pca9548arger.step",+      "lbr": "pca9548arger.lbr"+    },+    "distributor_links": {+      "lcsc": "C3217144",+      "digikey": "296-21776-2-ND",+      "mouser": "595-PCA9548ARGER"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T02:06:58Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-21776-2-ND",+        "status": "found",+        "lifecycle": "Not For New Designs"+      },+      "mouser": {+        "pn": "595-PCA9548ARGER",+        "status": "found",+        "lifecycle": "Not Recommended for New Designs"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "SD0",+        "type": "bidirectional",+        "description": "Serial data 0. Connect to VCC through a pull-up resistor."+      },+      {+        "number": "2",+        "name": "SC0",+        "type": "bidirectional",+        "description": "Serial clock 0. Connect to VCC through a pull-up resistor."+      },+      {+        "number": "3",+        "name": "SD1",+        "type": "bidirectional",+        "description": "Serial data 1. Connect to VCC through a pull-up resistor."+      },+      {+        "number": "4",+        "name": "SC1",+        "type": "bidirectional",+        "description": "Serial clock 1. Connect to VCC through a pull-up resistor."+      },+      {+        "number": "5",+        "name": "SD2",+        "type": "bidirectional",+        "description": "Serial data 2. Connect to VCC through a pull-up resistor."+      },+      {+        "number": "6",+        "name": "SC2",+        "type": "bidirectional",+        "description": "Serial clock 2. Connect to VCC through a pull-up resistor."+      },+      {+        "number": "7",+        "name": "SD3",+        "type": "bidirectional",+        "description": "Serial data 3. Connect to VCC through a pull-up resistor."+      },+      {+        "number": "8",+        "name": "SC3",+        "type": "bidirectional",+        "description": "Serial clock 3. Connect to VCC through a pull-up resistor."+      },+      {+        "number": "9",+        "name": "GND",+        "type": "power_in",+        "description": "Ground."+      },+      {+        "number": "10",+        "name": "SD4",+        "type": "bidirectional",+        "description": "Serial data 4. Connect to VCC through a pull-up resistor."+      },+      {+        "number": "11",+        "name": "SC4",+        "type": "bidirectional",+        "description": "Serial clock 4. Connect to VCC through a pull-up resistor."+      },+      {+        "number": "12",+        "name": "SD5",+        "type": "bidirectional",+        "description": "Serial data 5. Connect to VCC through a pull-up resistor."+      },+      {+        "number": "13",+        "name": "SC5",+        "type": "bidirectional",+        "description": "Serial clock 5. Connect to VCC through a pull-up resistor."+      },+      {+        "number": "14",+        "name": "SD6",+        "type": "bidirectional",+        "description": "Serial data 6. Connect to VCC through a pull-up resistor."+      },+      {+        "number": "15",+        "name": "SC6",+        "type": "bidirectional",+        "description": "Serial clock 6. Connect to VCC through a pull-up resistor."+      },+      {+        "number": "16",+        "name": "SD7",+        "type": "bidirectional",+        "description": "Serial data 7. Connect to VCC through a pull-up resistor."+      },+      {+        "number": "17",+        "name": "SC7",+        "type": "bidirectional",+        "description": "Serial clock 7. Connect to VCC through a pull-up resistor."+      },+      {+        "number": "18",+        "name": "A2",+        "type": "input",+        "description": "Address input 2. Connect directly to VCC or ground."+      },+      {+        "number": "19",+        "name": "SCL",+        "type": "bidirectional",+        "description": "Serial clock bus. Connect to VCC through a pull-up resistor."+      },+      {+        "number": "20",+        "name": "SDA",+        "type": "bidirectional",+        "description": "Serial data bus. Connect to VCC through a pull-up resistor."+      },+      {+        "number": "21",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage."+      },+      {+        "number": "22",+        "name": "A0",+        "type": "input",+        "description": "Address input 0. Connect directly to VCC or ground."+      },+      {+        "number": "23",+        "name": "A1",+        "type": "input",+        "description": "Address input 1. Connect directly to VCC or ground."+      },+      {+        "number": "24",+        "name": "RESET",+        "type": "input",+        "description": "Active-low reset input. Connect to VCC through a pull-up resistor, if not used."+      },+      {+        "number": "25",+        "name": "PAD",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 25 added from the footprint"+        ],+        "pages_sent": 46,+        "cost_usd": 0.3098,+        "at": "2026-09-27T02:06:39"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/pca9548a",+        "pages": 46,+        "sha256": "0ad97d70ad4250c5",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 25,+        "described": 25,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file