← Commit history
README.mdadded+58@@ -0,0 +1,58 @@+# PCA9543ADR++**Texas Instruments** · Analog Switches - Special Purpose · SOIC-14++PCA9543ADR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | A0 | input | Hardware I2C slave address input bit 0. Tie directly to VCC or GND to select one of four possible device addresses on the upstream I2C bus. |+| 2 | A1 | input | Hardware I2C slave address input bit 1. Tie directly to VCC or GND to select one of four possible device addresses on the upstream I2C bus. |+| 3 | RESET | input | Active-low reset input. A low pulse (min 4 ns) resets the I2C state machine and deselects both downstream channels. Connect to VCC or VDPUM through a pull-up resistor if not used. |+| 4 | INT0 | input | Active-low interrupt input from downstream channel 0. Connect to VDPU0 through a pull-up resistor. ANDed with INT1 to drive the INT output. |+| 5 | SD0 | bidirectional | Downstream channel 0 serial data line. Bidirectional open-drain pass-gate connection to SDA when channel 0 is selected. Requires an external pull-up to VDPU0. |+| 6 | SC0 | bidirectional | Downstream channel 0 serial clock line. Bidirectional open-drain pass-gate connection to SCL when channel 0 is selected. Requires an external pull-up to VDPU0. |+| 7 | GND | power_in | Ground reference for the device. 0 V. |+| 8 | INT1 | input | Active-low interrupt input from downstream channel 1. Connect to VDPU1 through a pull-up resistor. ANDed with INT0 to drive the INT output. |+| 9 | SD1 | bidirectional | Downstream channel 1 serial data line. Bidirectional open-drain pass-gate connection to SDA when channel 1 is selected. Requires an external pull-up to VDPU1. |+| 10 | SC1 | bidirectional | Downstream channel 1 serial clock line. Bidirectional open-drain pass-gate connection to SCL when channel 1 is selected. Requires an external pull-up to VDPU1. |+| 11 | INT | output | Active-low interrupt output (open-drain) to the upstream I2C master. Asserted low when either INT0 or INT1 is asserted. Connect to VDPUM through a pull-up resistor. IOL up to 3 mA at VOL = 0.4 V. |+| 12 | SCL | bidirectional | Upstream I2C serial clock line from the master. Open-drain; supports 0 to 400 kHz operation. Connect to VDPUM through a pull-up resistor. |+| 13 | SDA | bidirectional | Upstream I2C serial data line to/from the master. Open-drain, 5.5 V tolerant. Connect to VDPUM through a pull-up resistor. |+| 14 | VCC | power_in | Positive supply voltage. Operating range 2.3 V to 5.5 V. VCC also sets the maximum pass-gate voltage for downstream channels, enabling level translation between mixed-voltage I2C buses. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-14 |+| Category | Interface |+| Pins | 14 |++## Ordering variants++Same part, different packaging or reel option.++- `PCA9543ADR`+- `PCA9543ADRD`+- `PCA9543ADRPWR`+- `PCA9543ADRPW`++## CAD (KiCad official)++- Symbol: `PCA9543ADR`+- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`+- 3D model: SOIC-14 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/pca9543a.pdf) (34 pp, sha256 `669f202b834328fd`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/pca9543adr-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "pca9543adr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Analog Switches - Special Purpose, SOIC-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "pca9543adr"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "pca9543adr.kicad_sym",+ "pca9543adr.kicad_mod",+ "pca9543adr.glb",+ "pca9543adr.step",+ "pca9543adr.lbr",+ "docs/hero.png",+ "docs/pca9543adr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}