Generated by kicad-footprint-generator · KiCad file format 20260206
PCA9539PWJ
Nexperia · I/O Expanders · TSSOP-24
PCA9539PWJ from Nexperia, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INT | output | Open-drain active-LOW interrupt output; connect to VCC through a pull-up resistor. |
| 2 | A1 | input | Address input 1; connect directly to VCC or GND. |
| 3 | RESET | input | Active-LOW reset input; connect to VCC through a pull-up resistor if no active connection is used. |
| 4 | P0_0 | bidirectional | Port 0 bit 0 I/O with push-pull driver; configured as input at power on. |
| 5 | P0_1 | bidirectional | Port 0 bit 1 I/O with push-pull driver; configured as input at power on. |
| 6 | P0_2 | bidirectional | Port 0 bit 2 I/O with push-pull driver; configured as input at power on. |
| 7 | P0_3 | bidirectional | Port 0 bit 3 I/O with push-pull driver; configured as input at power on. |
| 8 | P0_4 | bidirectional | Port 0 bit 4 I/O with push-pull driver; configured as input at power on. |
| 9 | P0_5 | bidirectional | Port 0 bit 5 I/O with push-pull driver; configured as input at power on. |
| 10 | P0_6 | bidirectional | Port 0 bit 6 I/O with push-pull driver; configured as input at power on. |
| 11 | P0_7 | bidirectional | Port 0 bit 7 I/O with push-pull driver; configured as input at power on. |
| 12 | GND | power_in | Ground. |
| 13 | P1_0 | bidirectional | Port 1 bit 0 I/O with push-pull driver; configured as input at power on. |
| 14 | P1_1 | bidirectional | Port 1 bit 1 I/O with push-pull driver; configured as input at power on. |
| 15 | P1_2 | bidirectional | Port 1 bit 2 I/O with push-pull driver; configured as input at power on. |
| 16 | P1_3 | bidirectional | Port 1 bit 3 I/O with push-pull driver; configured as input at power on. |
| 17 | P1_4 | bidirectional | Port 1 bit 4 I/O with push-pull driver; configured as input at power on. |
| 18 | P1_5 | bidirectional | Port 1 bit 5 I/O with push-pull driver; configured as input at power on. |
| 19 | P1_6 | bidirectional | Port 1 bit 6 I/O with push-pull driver; configured as input at power on. |
| 20 | P1_7 | bidirectional | Port 1 bit 7 I/O with push-pull driver; configured as input at power on. |
| 21 | A0 | input | Address input 0; connect directly to VCC or GND. |
| 22 | SCL | input | I2C serial clock input; connect to VCC through a pull-up resistor. |
| 23 | SDA | bidirectional | I2C serial data line; connect to VCC through a pull-up resistor. |
| 24 | VCC | power_in | Supply voltage, 2.3 V to 5.5 V operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | TSSOP-24 |
| Category | Interface |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 2.3 | 5.5 | V | 16 | ||
| HIGH-level input voltage SCL, SDA | VIH | 0.7 | 5.5 | V | SCL, SDA; min is 0.7 × VCC | 16 | |
| HIGH-level input voltage P port | VIH | 0.7 | 5.5 | V | P1_7 to P0_0; min is 0.7 × VCC | 16 | |
| HIGH-level input voltage A0, A1, RESET | VIH | 0.7 | V | A0, A1, RESET; min is 0.7 × VCC, max is VCC | 16 | ||
| LOW-level input voltage SCL, SDA | VIL | -0.5 | 0.3 | V | SCL, SDA; max is 0.3 × VCC | 16 | |
| LOW-level input voltage A0, A1, RESET, P port | VIL | -0.5 | 0.3 | V | A0, A1, RESET, P1_7 to P0_0; max is 0.3 × VCC | 16 | |
| HIGH-level output current | IOH | 10 | mA | P1_7 to P0_0 | 16 | ||
| LOW-level output current | IOL | 25 | mA | P1_7 to P0_0 | 16 | ||
| Ambient temperature | Tamb | -40 | 85 | °C | operating in free air | 16 | |
| Supply voltage | VCC | -0.5 | 6 | V | 15 | ||
| Input voltage | VI | -0.5 | 6 | V | 15 | ||
| Output voltage | VO | -0.5 | 6 | V | 15 | ||
| Input clamping current | IIK | -20 | mA | A0, A1, RESET, SCL; VI < 0 V | 15 | ||
| Output clamping current INT | IOK | -20 | mA | INT; VO < 0 V | 15 | ||
| Input/output clamping current P port | IIOK | -20 | 20 | mA | P port; VO < 0 V or VO > VCC | 15 | |
| Input/output clamping current SDA | IIOK | -20 | mA | SDA; VO < 0 V | 15 | ||
| LOW-level output current I/O port | IOL | 50 | mA | continuous; I/O port | 15 | ||
| LOW-level output current SDA, INT | IOL | 25 | mA | continuous; SDA, INT | 15 | ||
| HIGH-level output current | IOH | 25 | mA | continuous; P port | 15 | ||
| Supply current | ICC | 160 | mA | 15 | |||
| Ground supply current | IGND | 250 | mA | 15 | |||
| Total power dissipation | Ptot | 200 | mW | 15 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 15 | ||
| Maximum junction temperature | Tj(max) | 100 | °C | 15 | |||
| Transient thermal impedance junction to ambient | Zth(j-a) | 100 | K/W | TSSOP24 package | 16 | ||
| Input clamping voltage | VIK | -1.2 | V | II = -18 mA | 17 | ||
| Power-on reset trip voltage, VCC rising | VPORR | 1.25 | 1.55 | V | VI = VCC or GND; IO = 0 mA | 17 | |
| LOW-level output current SDA | IOL | 3 | mA | VOL = 0.4 V; VCC = 2.3 V to 5.5 V; SDA | 17 | ||
| LOW-level output current INT | IOL | 3 | 28 | mA | VOL = 0.4 V; VCC = 2.3 V to 5.5 V; INT | 17 | |
| LOW-level output current P port | IOL | 8 | mA | VOL = 0.5 V; VCC = 2.3 V; P port | 17 | ||
| LOW-level output current P port | IOL | 10 | mA | VOL = 0.7 V; VCC = 2.3 V; P port | 17 | ||
| HIGH-level output voltage | VOH | 2 | V | P port; IOH = -8 mA; VCC = 2.3 V | 17 | ||
| HIGH-level output voltage | VOH | 1.9 | V | P port; IOH = -10 mA; VCC = 2.3 V | 17 | ||
| HIGH-level output voltage | VOH | 2.6 | V | P port; IOH = -8 mA; VCC = 3.0 V | 17 | ||
| HIGH-level output voltage | VOH | 2.5 | V | P port; IOH = -10 mA; VCC = 3.0 V | 17 | ||
| HIGH-level output voltage | VOH | 4.1 | V | P port; IOH = -8 mA; VCC = 4.5 V | 17 | ||
| HIGH-level output voltage | VOH | 4 | V | P port; IOH = -10 mA; VCC = 4.5 V | 17 | ||
| LOW-level output voltage | VOL | 0.3 | V | P port; IOL = 8 mA; VCC = 2.3 V | 17 | ||
| LOW-level output voltage | VOL | 0.25 | V | P port; IOL = 8 mA; VCC = 3.0 V | 17 | ||
| LOW-level output voltage | VOL | 0.2 | V | P port; IOL = 8 mA; VCC = 4.5 V | 17 | ||
| Input current SCL, SDA | II | 1 | μA | SCL, SDA; VI = VCC or GND; VCC = 2.3 V to 5.5 V | 17 | ||
| Input current A0, A1, RESET | II | -1 | 1 | μA | A0, A1, RESET; VI = VCC or GND; VCC = 2.3 V to 5.5 V | 17 | |
| HIGH-level input current P port | IIH | 1 | μA | P port; VI = VCC; VCC = 2.3 V to 5.5 V | 17 | ||
| LOW-level input current P port | IIL | -1 | μA | P port; VI = GND; VCC = 2.3 V to 5.5 V | 17 | ||
| Supply current, fSCL = 400 kHz | ICC | 13 | 28 | μA | VCC = 3.6 V to 5.5 V; I/O = inputs; IO = 0 mA; fSCL = 400 kHz (tr = 30 ns) | 18 | |
| Supply current, fSCL = 400 kHz | ICC | 6.4 | 11 | μA | VCC = 2.3 V to 3.6 V; I/O = inputs; IO = 0 mA; fSCL = 400 kHz (tr = 30 ns) | 18 | |
| Supply current, standby | ICC | 1 | μA | VCC = 2.3 V to 5.5 V; I/O = inputs; IO = 0 mA; fSCL = 0 kHz | 18 | ||
| Supply current, active mode | ICC | 15 | 55 | μA | VCC = 3.6 V to 5.5 V; fSCL = 400 kHz (tr = 30 ns), continuous register read | 18 | |
| Supply current, active mode | ICC | 7.4 | 22 | μA | VCC = 2.3 V to 3.6 V; fSCL = 400 kHz (tr = 30 ns), continuous register read | 18 | |
| Additional quiescent supply current SCL, SDA | ΔICC | 4.5 | μA | SCL, SDA; one input at VCC - 0.6 V, other inputs at VCC or GND; VCC = 2.3 V to 5.5 V | 18 | ||
| Additional quiescent supply current P port, A0, A1, RESET | ΔICC | 13 | μA | P port, A0, A1, RESET; one input at VCC - 0.6 V, other inputs at VCC or GND; VCC = 2.3 V to 5.5 V | 18 | ||
| Input capacitance | Ci | 1.5 | 2.5 | pF | VI = VCC or GND; VCC = 2.3 V to 5.5 V | 18 | |
| Input/output capacitance | Cio | 3 | 4.5 | pF | VI/O = VCC or GND; VD = 2.3 V to 5.5 V | 18 | |
| SCL clock frequency (Fast-mode) | fSCL | 0 | 400 | kHz | Fast-mode I²C-bus | 22 | |
| HIGH period of SCL clock (Fast-mode) | tHIGH | 0.6 | μs | Fast-mode I²C-bus | 22 | ||
| LOW period of SCL clock (Fast-mode) | tLOW | 1.3 | μs | Fast-mode I²C-bus | 22 | ||
| Reset pulse width | tw(rst) | 6 | ns | CL ≤ 100 pF | 23 | ||
| Reset time | trst | 550 | ns | CL ≤ 100 pF | 23 | ||
| Valid time on pin INT from P port to INT | tv(INT) | 1 | μs | CL ≤ 100 pF | 23 | ||
| Data output valid time from SCL to P port | tv(Q) | 185 | ns | CL ≤ 100 pF | 23 |
CAD (KiCad official)
- Symbol:
PCA9539PWJ - Footprint:
Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm - 3D model: TSSOP-24 (KiCad packages3D, STEP)
- 3D model files:
pca9539pwj-etched.step/pca9539pwj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pca9539pwj.step/pca9539pwj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (31 pp, sha256
988f03c42378431e, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).