← Commit history

Initial commit: component/pca9534pwr

Ray ·d47e71b1b4 ·
2 files changed +256
README.mdadded+52
@@ -0,0 +1,52 @@+# PCA9534PWR++**Texas Instruments** · I/O Expanders · TSSOP-16++PCA9534PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | A0 | input | Address input pin; connect to VCC or ground to set slave address bit. |+| 2 | A1 | input | Address input pin; connect to VCC or ground to set slave address bit. |+| 3 | A2 | input | Address input pin; connect to VCC or ground to set slave address bit. |+| 4 | P0 | bidirectional | General-purpose I/O port with push-pull structure; configurable as input or output via configuration register. |+| 5 | P1 | bidirectional | General-purpose I/O port with push-pull structure; configurable as input or output via configuration register. |+| 6 | P2 | bidirectional | General-purpose I/O port with push-pull structure; configurable as input or output via configuration register. |+| 7 | P3 | bidirectional | General-purpose I/O port with push-pull structure; configurable as input or output via configuration register. |+| 8 | GND | power_in | Ground reference (0 V). |+| 9 | P4 | bidirectional | General-purpose I/O port with push-pull structure; configurable as input or output via configuration register. |+| 10 | P5 | bidirectional | General-purpose I/O port with push-pull structure; configurable as input or output via configuration register. |+| 11 | P6 | bidirectional | General-purpose I/O port with push-pull structure; configurable as input or output via configuration register. |+| 12 | P7 | bidirectional | General-purpose I/O port with push-pull structure; configurable as input or output via configuration register. |+| 13 | INT | tri_state | Interrupt output with open-drain structure; requires external pullup resistor to VCC; asserted when any input state changes. |+| 14 | SCL | bidirectional | I2C serial clock bus line with open-drain structure; connect to VCC through pullup resistor. |+| 15 | SDA | bidirectional | I2C serial data bus line with open-drain structure; connect to VCC through pullup resistor. |+| 16 | VCC | power_in | Supply voltage; operating range 2.3 V to 5.5 V per Recommended Operating Conditions. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | Interface |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `PCA9534PWR`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `pca9534pwr-etched.step` / `pca9534pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pca9534pwr.step` / `pca9534pwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/pca9534.pdf) (47 pp, sha256 `63806b0a77b90a16`, retrieved 2026-09-25, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/pca9534pwr-datasheet.pdf)
page.jsonadded+204
@@ -0,0 +1,204 @@+{+  "slug": "pca9534pwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments I/O Expanders, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "pca9534pwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "pca9534pwr.kicad_sym",+    "pca9534pwr.kicad_mod",+    "pca9534pwr.glb",+    "pca9534pwr.step",+    "pca9534pwr.lbr",+    "docs/hero.png",+    "docs/pca9534pwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "PCA9534PWR",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-16",+    "pin_count": 16,+    "category": "Interface",+    "subcategory": "I/O Expanders",+    "datasheet": "https://www.ti.com/lit/ds/symlink/pca9534.pdf",+    "parts": {+      "symbol": "pca9534pwr.kicad_sym",+      "footprint": "pca9534pwr.kicad_mod",+      "model_3d": "pca9534pwr-etched.glb",+      "model_3d_plain": "pca9534pwr.glb",+      "model_3d_step": "pca9534pwr-etched.step",+      "model_3d_step_plain": "pca9534pwr.step",+      "lbr": "pca9534pwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C133803",+      "digikey": "296-21764-2-ND",+      "mouser": "595-PCA9534PWR"+    },+    "distributor_check": {+      "checked_at": "2026-09-25T14:41:57Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-21764-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-PCA9534PWR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "A0",+        "type": "input",+        "description": "Address input pin; connect to VCC or ground to set slave address bit."+      },+      {+        "number": "2",+        "name": "A1",+        "type": "input",+        "description": "Address input pin; connect to VCC or ground to set slave address bit."+      },+      {+        "number": "3",+        "name": "A2",+        "type": "input",+        "description": "Address input pin; connect to VCC or ground to set slave address bit."+      },+      {+        "number": "4",+        "name": "P0",+        "type": "bidirectional",+        "description": "General-purpose I/O port with push-pull structure; configurable as input or output via configuration register."+      },+      {+        "number": "5",+        "name": "P1",+        "type": "bidirectional",+        "description": "General-purpose I/O port with push-pull structure; configurable as input or output via configuration register."+      },+      {+        "number": "6",+        "name": "P2",+        "type": "bidirectional",+        "description": "General-purpose I/O port with push-pull structure; configurable as input or output via configuration register."+      },+      {+        "number": "7",+        "name": "P3",+        "type": "bidirectional",+        "description": "General-purpose I/O port with push-pull structure; configurable as input or output via configuration register."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference (0 V)."+      },+      {+        "number": "9",+        "name": "P4",+        "type": "bidirectional",+        "description": "General-purpose I/O port with push-pull structure; configurable as input or output via configuration register."+      },+      {+        "number": "10",+        "name": "P5",+        "type": "bidirectional",+        "description": "General-purpose I/O port with push-pull structure; configurable as input or output via configuration register."+      },+      {+        "number": "11",+        "name": "P6",+        "type": "bidirectional",+        "description": "General-purpose I/O port with push-pull structure; configurable as input or output via configuration register."+      },+      {+        "number": "12",+        "name": "P7",+        "type": "bidirectional",+        "description": "General-purpose I/O port with push-pull structure; configurable as input or output via configuration register."+      },+      {+        "number": "13",+        "name": "INT",+        "type": "tri_state",+        "description": "Interrupt output with open-drain structure; requires external pullup resistor to VCC; asserted when any input state changes."+      },+      {+        "number": "14",+        "name": "SCL",+        "type": "bidirectional",+        "description": "I2C serial clock bus line with open-drain structure; connect to VCC through pullup resistor."+      },+      {+        "number": "15",+        "name": "SDA",+        "type": "bidirectional",+        "description": "I2C serial data bus line with open-drain structure; connect to VCC through pullup resistor."+      },+      {+        "number": "16",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage; operating range 2.3 V to 5.5 V per Recommended Operating Conditions."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 47,+        "cost_usd": 0.3572,+        "at": "2026-09-25T14:41:37"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/pca9534.pdf",+        "pages": 47,+        "sha256": "63806b0a77b90a16",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file