component
PCA9534PWR
Public Made by Adomby adom
Texas Instruments I/O Expanders, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownPCA9534PWR
Texas Instruments · I/O Expanders · TSSOP-16
PCA9534PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Address input pin; connect to VCC or ground to set slave address bit. |
| 2 | A1 | input | Address input pin; connect to VCC or ground to set slave address bit. |
| 3 | A2 | input | Address input pin; connect to VCC or ground to set slave address bit. |
| 4 | P0 | bidirectional | General-purpose I/O port with push-pull structure; configurable as input or output via configuration register. |
| 5 | P1 | bidirectional | General-purpose I/O port with push-pull structure; configurable as input or output via configuration register. |
| 6 | P2 | bidirectional | General-purpose I/O port with push-pull structure; configurable as input or output via configuration register. |
| 7 | P3 | bidirectional | General-purpose I/O port with push-pull structure; configurable as input or output via configuration register. |
| 8 | GND | power_in | Ground reference (0 V). |
| 9 | P4 | bidirectional | General-purpose I/O port with push-pull structure; configurable as input or output via configuration register. |
| 10 | P5 | bidirectional | General-purpose I/O port with push-pull structure; configurable as input or output via configuration register. |
| 11 | P6 | bidirectional | General-purpose I/O port with push-pull structure; configurable as input or output via configuration register. |
| 12 | P7 | bidirectional | General-purpose I/O port with push-pull structure; configurable as input or output via configuration register. |
| 13 | INT | tri_state | Interrupt output with open-drain structure; requires external pullup resistor to VCC; asserted when any input state changes. |
| 14 | SCL | bidirectional | I2C serial clock bus line with open-drain structure; connect to VCC through pullup resistor. |
| 15 | SDA | bidirectional | I2C serial data bus line with open-drain structure; connect to VCC through pullup resistor. |
| 16 | VCC | power_in | Supply voltage; operating range 2.3 V to 5.5 V per Recommended Operating Conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
PCA9534PWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
pca9534pwr-etched.step/pca9534pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pca9534pwr.step/pca9534pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (47 pp, sha256
63806b0a77b90a16, retrieved 2026-09-25, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).