main
Ray Publish 0.1.0 026082c
{
  "slug": "pca9531d",
  "version": "0.1.0",
  "type": "component",
  "description": "NXP Semicon LED Drivers, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "display modules - led drivers - display drivers",
    "pca9531d",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pca9531d.kicad_sym",
    "pca9531d.kicad_mod",
    "pca9531d.glb",
    "pca9531d.step",
    "pca9531d.lbr",
    "docs/hero.png",
    "docs/pca9531d-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "pca9531d-hero.glb",
    "pca9531d-hero.overlay.json",
    "pca9531d-etched.glb"
  ],
  "component": {
    "mpn": "PCA9531D",
    "manufacturer": "NXP Semicon",
    "package": "SOIC-16",
    "pin_count": 16,
    "category": "Display Modules / LED Drivers / Display Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.nxp.com/docs/en/data-sheet/PCA9531D.pdf",
    "parts": {
      "symbol": "pca9531d.kicad_sym",
      "footprint": "pca9531d.kicad_mod",
      "model_3d": "pca9531d-hero.glb",
      "model_3d_plain": "pca9531d-etched.glb",
      "model_3d_step": "pca9531d-etched.step",
      "model_3d_step_plain": "pca9531d.step",
      "lbr": "pca9531d.lbr"
    },
    "distributor_links": {
      "lcsc": "C2679037",
      "mouser": "771-PCA9531D"
    },
    "distributor_check": {
      "checked_at": "2026-10-26T04:37:05Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": "771-PCA9531D",
        "status": "found",
        "lifecycle": "Obsolete"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "A0",
        "type": "input",
        "description": "Hardware address input 0 sets the programmable bit of the slave address and has no internal pull-up, so it must be pulled HIGH or LOW."
      },
      {
        "number": "2",
        "name": "A1",
        "type": "input",
        "description": "Hardware address input 1 sets the programmable bit of the slave address and has no internal pull-up, so it must be pulled HIGH or LOW."
      },
      {
        "number": "3",
        "name": "A2",
        "type": "input",
        "description": "Hardware address input 2 sets the programmable bit of the slave address and has no internal pull-up, so it must be pulled HIGH or LOW."
      },
      {
        "number": "4",
        "name": "LED0",
        "type": "bidirectional",
        "description": "Open-drain LED driver 0 directly drives an LED to a maximum of 25 mA per bit (100 mA per package); if not used as an LED driver it can serve as a GPIO."
      },
      {
        "number": "5",
        "name": "LED1",
        "type": "bidirectional",
        "description": "Open-drain LED driver 1 directly drives an LED to a maximum of 25 mA per bit (100 mA per package); if not used as an LED driver it can serve as a GPIO."
      },
      {
        "number": "6",
        "name": "LED2",
        "type": "bidirectional",
        "description": "Open-drain LED driver 2 directly drives an LED to a maximum of 25 mA per bit (100 mA per package); if not used as an LED driver it can serve as a GPIO."
      },
      {
        "number": "7",
        "name": "LED3",
        "type": "bidirectional",
        "description": "Open-drain LED driver 3 directly drives an LED to a maximum of 25 mA per bit (100 mA per package); if not used as an LED driver it can serve as a GPIO."
      },
      {
        "number": "8",
        "name": "VSS",
        "type": "power_in",
        "description": "Supply ground; it must be connected to supply ground for proper device operation."
      },
      {
        "number": "9",
        "name": "LED4",
        "type": "bidirectional",
        "description": "Open-drain LED driver 4 directly drives an LED to a maximum of 25 mA per bit (100 mA per package); if not used as an LED driver it can serve as a GPIO."
      },
      {
        "number": "10",
        "name": "LED5",
        "type": "bidirectional",
        "description": "Open-drain LED driver 5 directly drives an LED to a maximum of 25 mA per bit (100 mA per package); if not used as an LED driver it can serve as a GPIO."
      },
      {
        "number": "11",
        "name": "LED6",
        "type": "bidirectional",
        "description": "Open-drain LED driver 6 directly drives an LED to a maximum of 25 mA per bit (100 mA per package); if not used as an LED driver it can serve as a GPIO."
      },
      {
        "number": "12",
        "name": "LED7",
        "type": "bidirectional",
        "description": "Open-drain LED driver 7 directly drives an LED to a maximum of 25 mA per bit (100 mA per package); if not used as an LED driver it can serve as a GPIO."
      },
      {
        "number": "13",
        "name": "RESET",
        "type": "input",
        "description": "Active LOW reset input; asserting it, or power-on reset, returns the registers to their default state with all LED bits HIGH (LED off)."
      },
      {
        "number": "14",
        "name": "SCL",
        "type": "input",
        "description": "I2C-bus serial clock line with noise filter, supporting clock frequencies from 0 Hz to 400 kHz."
      },
      {
        "number": "15",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C-bus serial data line with noise filter, compatible with SMBus."
      },
      {
        "number": "16",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply voltage with an operating range of 2.3 V to 5.5 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin types are mapped by me to KiCad classes. LED0-LED7 are open-drain outputs that the datasheet als; Pin 8 (VSS) is shown in the source text as '86[1]' and carries footnote [1] about the HVQFN16 die gr"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0522,
        "at": "2026-10-26T04:36:49"
      },
      "datasheet": {
        "url": "https://www.nxp.com/docs/en/data-sheet/PCA9531D.pdf",
        "pages": 27,
        "sha256": "556cfc5d2fadb0d4",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pca9531d.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pca9531d-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "add111f52eeb8f26110e730ae59bb4e94fac608329f48d9fc92db133503a01ba",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}