Generated by kicad-footprint-generator · KiCad file format 20260206
PCA9518PWR
Texas Instruments · Interface - Specialized · TSSOP-20
PCA9518PWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EXPSCL1 | bidirectional | Expandable serial clock pin 1; connect to VCC through a pullup resistor, and it is driven LOW whenever any SCL pin falls below 0.3-V VCC. |
| 2 | EXPSCL2 | bidirectional | Expandable serial clock pin 2; connect to VCC through a pullup resistor, and it is driven LOW when any SCL pin is 0.4 V or below. |
| 3 | SCL0 | bidirectional | Serial clock bus 0; connect to VCC through a pullup resistor. |
| 4 | SDA0 | bidirectional | Serial data bus 0; connect to VCC through a pullup resistor. |
| 5 | SCL1 | bidirectional | Serial clock bus 1; connect to VCC through a pullup resistor. |
| 6 | SDA1 | bidirectional | Serial data bus 1; connect to VCC through a pullup resistor. |
| 7 | EN1 | input | Active-high bus enable 1; it can be used to electrically isolate repeater segment 1 from the I2C bus. |
| 8 | SCL2 | bidirectional | Serial clock bus 2; connect to VCC through a pullup resistor. |
| 9 | SDA2 | bidirectional | Serial data bus 2; connect to VCC through a pullup resistor. |
| 10 | GND | power_in | Ground. |
| 11 | EN2 | input | Active-high bus enable 2; it can be used to electrically isolate repeater segment 2 from the I2C bus. |
| 12 | SCL3 | bidirectional | Serial clock bus 3; connect to VCC through a pullup resistor. |
| 13 | SDA3 | bidirectional | Serial data bus 3; connect to VCC through a pullup resistor. |
| 14 | EN3 | input | Active-high bus enable 3; it can be used to electrically isolate repeater segment 3 from the I2C bus. |
| 15 | SCL4 | bidirectional | Serial clock bus 4; connect to VCC through a pullup resistor. |
| 16 | SDA4 | bidirectional | Serial data bus 4; connect to VCC through a pullup resistor. |
| 17 | EN4 | input | Active-high bus enable 4; it can be used to electrically isolate repeater segment 4 from the I2C bus. |
| 18 | EXPSDA1 | bidirectional | Expandable serial data pin 1; connect to VCC through a pullup resistor, and it is driven low whenever any SDA pin falls below 0.3-V VCC. |
| 19 | EXPSDA2 | bidirectional | Expandable serial data pin 2; connect to VCC through a pullup resistor, and it is driven low when any SDA pin is 0.4 V or below. |
| 20 | VCC | power_in | Supply voltage; the device is designed for 3-V to 3.6-V VCC operation, with an absolute maximum range of -0.5 V to 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Interface |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
PCA9518PWR - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
pca9518pwr-etched.step/pca9518pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pca9518pwr.step/pca9518pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
87b1cb7fdab2f2f4, retrieved 2026-10-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).