main
Ray
Publish 0.1.0
f452a60
PCA9515BDGKR
Texas Instruments · Signal Buffers, Repeaters, Splitters · MSOP-8
PCA9515BDGKR from Texas Instruments, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. |
| 2 | SCL0 | bidirectional | Serial clock bus 0 is an open-drain I2C/SMBus clock line that is 5.5-V tolerant. |
| 3 | SDA0 | bidirectional | Serial data bus 0 is an open-drain I2C/SMBus data line that is 5.5-V tolerant. |
| 4 | GND | power_in | Supply ground for the device. |
| 5 | EN | input | Active-high repeater enable input with an internal pull-up to VCC; it must be pulled to GND to disable the repeater and isolate the buses. |
| 6 | SDA1 | bidirectional | Serial data bus 1 is an open-drain I2C/SMBus data line that is 5.5-V tolerant. |
| 7 | SCL1 | bidirectional | Serial clock bus 1 is an open-drain I2C/SMBus clock line that is 5.5-V tolerant. |
| 8 | VCC | power_in | Supply power input, requiring 2.3 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 | 7 | V | 4 | ||
| Enable input voltage | VI | -0.5 | 7 | V | 4 | ||
| I2C bus voltage | VI/O | -0.5 | 7 | V | 4 | ||
| Input clamp current | IIK | -50 | mA | VI < 0 | 4 | ||
| Output clamp current | IOK | -50 | mA | VO < 0 | 4 | ||
| Continuous output current | IO | -50 | 50 | mA | 4 | ||
| Continuous current through VCC or GND | -100 | 100 | mA | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | VCC | 2.3 | 3.6 | V | 4 | ||
| High-level input voltage, SDA and SCL inputs | VIH | 5.5 | V | SDA and SCL inputs; min printed as 0.7 × VCC | 4 | ||
| High-level input voltage, EN input | VIH | 2 | 5.5 | V | EN input | 4 | |
| Low-level input voltage, SDA and SCL inputs | VIL | -0.5 | V | SDA and SCL inputs; max printed as 0.3 × VCC | 4 | ||
| Low-level input voltage, EN input | VIL | -0.5 | 0.8 | V | EN input | 4 | |
| SDA and SCL low-level input voltage contention | VILc | -0.5 | 0.4 | V | 4 | ||
| Low-level output current | IOL | 6 | mA | VCC = 2.3 V | 4 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 4 | ||
| Input diode clamp voltage | VIK | -1.2 | V | II = -18 mA; VCC 2.3 V to 3.6 V | 5 | ||
| Low-level output voltage | VOL | 0.47 | 0.52 | 0.6 | V | SDAx, SCLx IOL = 20 μA or 6 mA; VCC 2.3 V to 3.6 V | 5 |
| Low-level input voltage below low-level output voltage | VOL, VILc | 120 | mV | SDAx, SCLx guaranteed by design; VCC 2.3 V to 3.6 V | 5 | ||
| Quiescent supply current, both channels high | ICC | 0.5 | 3 | mA | Both channels high, SDAx = SCLx = VCC; VCC = 2.7 V | 5 | |
| Quiescent supply current, both channels low | ICC | 1 | 4 | mA | Both channels low, SDA0 = SCL0 = GND and SDA1 = SCL1 = open, or SDA0 = SCL0 = open and SDA1 = SCL1 = GND; VCC = 2.7 V | 5 | |
| Quiescent supply current, in contention | ICC | 1 | 4 | mA | In contention, SDAx = SCLx = GND; VCC = 2.7 V | 5 | |
| Input current, SDAx and SCLx | II | -1 | 1 | μA | VI = 3.6 V; VCC 2.3 V to 3.6 V | 5 | |
| Input current, SDAx and SCLx | II | 3 | μA | VI = 0.2 V | 5 | ||
| Input current, EN | II | -1 | 1 | μA | VI = VCC | 5 | |
| Input current, EN | II | -20 | -10 | μA | VI = 0.2 V | 5 | |
| Leakage current, SDAx and SCLx | Ioff | 0.5 | μA | VI = 3.6 V; EN = L or H 0 V | 5 | ||
| Leakage current during power up, SDAx and SCLx | II(ramp) | 1 | μA | VI = 3.6 V; EN = L or H; 0 V to 2.3 V | 5 | ||
| Input capacitance, EN | Cin | 7 | 9 | pF | VI = 3 V or GND; 3.3 V | 5 | |
| Input capacitance, SDAx and SCLx | Cin | 7 | 9 | pF | EN = H; 3.3 V | 5 | |
| Setup time, EN↑ before Start condition | tsu | 100 | ns | VCC = 2.5 V ± 0.2 V | 5 | ||
| Hold time, EN↓ after Stop condition | th | 130 | ns | VCC = 2.5 V ± 0.2 V | 5 | ||
| Hold time, EN↓ after Stop condition | th | 100 | ns | VCC = 3.3 V ± 0.3 V | 5 | ||
| Propagation delay time, SDA0/SCL0 or SDA1/SCL1 to SDA1/SCL1 or SDA0/SCL0 (tPZL) | tPZL | 82 | 130 | ns | CL ≤ 100 pF; VCC = 2.5 V ± 0.2 V | 5 | |
| Propagation delay time, SDA0/SCL0 or SDA1/SCL1 to SDA1/SCL1 or SDA0/SCL0 (tPZL) | tPZL | 68 | 120 | ns | CL ≤ 100 pF; VCC = 3.3 V ± 0.3 V | 5 | |
| Propagation delay time, low-to-high-impedance (tPLZ) | tPLZ | 113 | 190 | ns | CL ≤ 100 pF; VCC = 2.5 V ± 0.2 V | 5 | |
| Propagation delay time, low-to-high-impedance (tPLZ) | tPLZ | 102 | 180 | ns | CL ≤ 100 pF; VCC = 3.3 V ± 0.3 V | 5 | |
| Thermal resistance, junction-to-ambient | RθJA | 170.8 | °C/W | DGK (VSSOP) 8 pins | 4 | ||
| Thermal resistance, junction-to-case (top) | RθJC(top) | 62.9 | °C/W | DGK (VSSOP) 8 pins | 4 | ||
| Thermal resistance, junction-to-board | RθJB | 91.6 | °C/W | DGK (VSSOP) 8 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 9.5 | °C/W | DGK (VSSOP) 8 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 90.2 | °C/W | DGK (VSSOP) 8 pins | 4 |
CAD (KiCad official)
- Symbol:
PCA9515BDGKR - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
pca9515bdgkr-etched.step/pca9515bdgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pca9515bdgkr.step/pca9515bdgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (21 pp, sha256
9285bb8d6ea98153, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PCA9515BDGKR
**Texas Instruments** · Signal Buffers, Repeaters, Splitters · MSOP-8
PCA9515BDGKR from Texas Instruments, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. |
| 2 | SCL0 | bidirectional | Serial clock bus 0 is an open-drain I2C/SMBus clock line that is 5.5-V tolerant. |
| 3 | SDA0 | bidirectional | Serial data bus 0 is an open-drain I2C/SMBus data line that is 5.5-V tolerant. |
| 4 | GND | power_in | Supply ground for the device. |
| 5 | EN | input | Active-high repeater enable input with an internal pull-up to VCC; it must be pulled to GND to disable the repeater and isolate the buses. |
| 6 | SDA1 | bidirectional | Serial data bus 1 is an open-drain I2C/SMBus data line that is 5.5-V tolerant. |
| 7 | SCL1 | bidirectional | Serial clock bus 1 is an open-drain I2C/SMBus clock line that is 5.5-V tolerant. |
| 8 | VCC | power_in | Supply power input, requiring 2.3 V to 3.6 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8 |
| Category | Interface |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 | | 7 | V | | 4 |
| Enable input voltage | VI | -0.5 | | 7 | V | | 4 |
| I2C bus voltage | VI/O | -0.5 | | 7 | V | | 4 |
| Input clamp current | IIK | -50 | | | mA | VI < 0 | 4 |
| Output clamp current | IOK | -50 | | | mA | VO < 0 | 4 |
| Continuous output current | IO | -50 | | 50 | mA | | 4 |
| Continuous current through VCC or GND | | -100 | | 100 | mA | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Supply voltage | VCC | 2.3 | | 3.6 | V | | 4 |
| High-level input voltage, SDA and SCL inputs | VIH | | | 5.5 | V | SDA and SCL inputs; min printed as 0.7 × VCC | 4 |
| High-level input voltage, EN input | VIH | 2 | | 5.5 | V | EN input | 4 |
| Low-level input voltage, SDA and SCL inputs | VIL | -0.5 | | | V | SDA and SCL inputs; max printed as 0.3 × VCC | 4 |
| Low-level input voltage, EN input | VIL | -0.5 | | 0.8 | V | EN input | 4 |
| SDA and SCL low-level input voltage contention | VILc | -0.5 | | 0.4 | V | | 4 |
| Low-level output current | IOL | | | 6 | mA | VCC = 2.3 V | 4 |
| Operating free-air temperature | TA | -40 | | 85 | °C | | 4 |
| Input diode clamp voltage | VIK | | | -1.2 | V | II = -18 mA; VCC 2.3 V to 3.6 V | 5 |
| Low-level output voltage | VOL | 0.47 | 0.52 | 0.6 | V | SDAx, SCLx IOL = 20 μA or 6 mA; VCC 2.3 V to 3.6 V | 5 |
| Low-level input voltage below low-level output voltage | VOL, VILc | | 120 | | mV | SDAx, SCLx guaranteed by design; VCC 2.3 V to 3.6 V | 5 |
| Quiescent supply current, both channels high | ICC | | 0.5 | 3 | mA | Both channels high, SDAx = SCLx = VCC; VCC = 2.7 V | 5 |
| Quiescent supply current, both channels low | ICC | | 1 | 4 | mA | Both channels low, SDA0 = SCL0 = GND and SDA1 = SCL1 = open, or SDA0 = SCL0 = open and SDA1 = SCL1 = GND; VCC = 2.7 V | 5 |
| Quiescent supply current, in contention | ICC | | 1 | 4 | mA | In contention, SDAx = SCLx = GND; VCC = 2.7 V | 5 |
| Input current, SDAx and SCLx | II | -1 | | 1 | μA | VI = 3.6 V; VCC 2.3 V to 3.6 V | 5 |
| Input current, SDAx and SCLx | II | | | 3 | μA | VI = 0.2 V | 5 |
| Input current, EN | II | -1 | | 1 | μA | VI = VCC | 5 |
| Input current, EN | II | -20 | | -10 | μA | VI = 0.2 V | 5 |
| Leakage current, SDAx and SCLx | Ioff | | | 0.5 | μA | VI = 3.6 V; EN = L or H 0 V | 5 |
| Leakage current during power up, SDAx and SCLx | II(ramp) | | | 1 | μA | VI = 3.6 V; EN = L or H; 0 V to 2.3 V | 5 |
| Input capacitance, EN | Cin | | 7 | 9 | pF | VI = 3 V or GND; 3.3 V | 5 |
| Input capacitance, SDAx and SCLx | Cin | | 7 | 9 | pF | EN = H; 3.3 V | 5 |
| Setup time, EN↑ before Start condition | tsu | 100 | | | ns | VCC = 2.5 V ± 0.2 V | 5 |
| Hold time, EN↓ after Stop condition | th | 130 | | | ns | VCC = 2.5 V ± 0.2 V | 5 |
| Hold time, EN↓ after Stop condition | th | 100 | | | ns | VCC = 3.3 V ± 0.3 V | 5 |
| Propagation delay time, SDA0/SCL0 or SDA1/SCL1 to SDA1/SCL1 or SDA0/SCL0 (tPZL) | tPZL | | 82 | 130 | ns | CL ≤ 100 pF; VCC = 2.5 V ± 0.2 V | 5 |
| Propagation delay time, SDA0/SCL0 or SDA1/SCL1 to SDA1/SCL1 or SDA0/SCL0 (tPZL) | tPZL | | 68 | 120 | ns | CL ≤ 100 pF; VCC = 3.3 V ± 0.3 V | 5 |
| Propagation delay time, low-to-high-impedance (tPLZ) | tPLZ | | 113 | 190 | ns | CL ≤ 100 pF; VCC = 2.5 V ± 0.2 V | 5 |
| Propagation delay time, low-to-high-impedance (tPLZ) | tPLZ | | 102 | 180 | ns | CL ≤ 100 pF; VCC = 3.3 V ± 0.3 V | 5 |
| Thermal resistance, junction-to-ambient | RθJA | | 170.8 | | °C/W | DGK (VSSOP) 8 pins | 4 |
| Thermal resistance, junction-to-case (top) | RθJC(top) | | 62.9 | | °C/W | DGK (VSSOP) 8 pins | 4 |
| Thermal resistance, junction-to-board | RθJB | | 91.6 | | °C/W | DGK (VSSOP) 8 pins | 4 |
| Junction-to-top characterization parameter | ψJT | | 9.5 | | °C/W | DGK (VSSOP) 8 pins | 4 |
| Junction-to-board characterization parameter | ψJB | | 90.2 | | °C/W | DGK (VSSOP) 8 pins | 4 |
## CAD (KiCad official)
- Symbol: `PCA9515BDGKR`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `pca9515bdgkr-etched.step` / `pca9515bdgkr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pca9515bdgkr.step` / `pca9515bdgkr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/pca9515b.pdf) (21 pp, sha256 `9285bb8d6ea98153`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pca9515bdgkr-datasheet.pdf)