main
Ray
Publish 0.1.0
285ffe2
PC925LENSZ0F
Sharp Microelectronics · Optocouplers - Logic Output · DIP-8
PC925LENSZ0F from Sharp Microelectronics, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N.C. | unconnected | No internal connection on the primary side. |
| 2 | Anode | input | LED anode; recommended forward current IF(ON) is 7 to 16 mA (25 mA absolute maximum). |
| 3 | Cathode | input | LED cathode; recommended forward voltage in the OFF state VF(OFF) is -3.0 to 0.8 V. |
| 4 | N.C. | unconnected | No internal connection on the primary side. |
| 5 | GND | power_in | Secondary-side ground; a bypass capacitor of 0.1 µF or more is needed between VCC and GND near the device. |
| 6 | VO | output | Gate drive output (totem-pole Tr.1/Tr.2) with peak output current up to 2.5 A; internally connected to pin 7. |
| 7 | VO | output | Gate drive output (totem-pole Tr.1/Tr.2) with peak output current up to 2.5 A; internally connected to pin 6. |
| 8 | VCC | power_in | Supply voltage, recommended 15 to 30 V (35 V absolute maximum), with a 0.1 µF or larger bypass capacitor to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sharp Microelectronics |
| Package | DIP-8 |
| Category | Optocoupler/LED/Digital Tube/Photoelectric Device |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Forward current | IF | 25 | mA | Ta=25℃ | 6 | ||
| Reverse voltage | VR | 5 | V | Ta=25℃ | 6 | ||
| Peak forward current | IFM | 1 | A | Pulse width≦1μs, 300pps | 6 | ||
| Supply voltage | Vcc | 35 | V | Ta=25℃ | 6 | ||
| Peak output current | Io(PEAK) | 2.5 | A | Pulse width≦10μs, Duty ratio : 0.002 | 6 | ||
| Power dissipation | Po | 250 | mW | Ta=25℃ | 6 | ||
| Total power dissipation | Ptot | 295 | mW | Ta=25℃ | 6 | ||
| Isolation voltage | Viso(rms) | 5 | kV | AC for 1 min, 40 to 60%RH, Ta=25℃ | 6 | ||
| Operating temperature | Topr | -40 | 100 | ℃ | 6 | ||
| Storage temperature | Tstg | -55 | 125 | ℃ | 6 | ||
| Soldering temperature | Tsol | 270 | ℃ | For 10s | 6 | ||
| Forward voltage | VF | 1.2 | 1.8 | V | Ta=25℃, IF=10mA | 7 | |
| Reverse current | IR | 10 | μA | VR=5V | 7 | ||
| Terminal capacitance | Ct | 60 | 150 | pF | Ta=25℃, V=0, f=1MHz | 7 | |
| High level output current | IOH | 0.5 | 1.5 | A | VO=(VCC-4V), IF(ON) | 7 | |
| High level output current | IOH | 2 | A | VO=(VCC-15V), IF(ON) | 7 | ||
| Low level output current | IOL | 0.5 | 2 | A | VO=2.5V, VF(OFF) | 7 | |
| Low level output current | IOL | 2 | A | VO=15V, VF(OFF) | 7 | ||
| Low level output voltage | VOL | 0.1 | 0.5 | V | IO=0.1A, VF(OFF) | 7 | |
| High level supply current | ICCH | 3 | mA | IF(ON), output open | 7 | ||
| Low level supply current | ICCL | 3 | mA | VF(OFF), output open | 7 | ||
| UVLO threshold (positive) | VUVLO+ | 11 | 12.7 | 13.5 | V | VO>5V, IF=10mA | 7 |
| UVLO threshold (negative) | VUVLO- | 9.5 | 11.2 | 12 | V | VO>5V, IF=10mA | 7 |
| UVLO hysteresis | UVLOHYS | 1.5 | V | 7 | |||
| L→H threshold input current | IFLH | 5 | mA | VO>5V, IO=0 | 7 | ||
| L→H propagation delay time | tPLH | 0.05 | 0.2 | 0.5 | μs | RG=10Ω, CG=10nF, f=10kHz, Duty ratio 50% | 7 |
| H→L propagation delay time | tPHL | 0.05 | 0.2 | 0.5 | μs | RG=10Ω, CG=10nF, f=10kHz, Duty ratio 50% | 7 |
| Distortion of pulse width | ΔtW | 0.3 | μs | RG=10Ω, CG=10nF, f=10kHz, Duty ratio 50% | 7 | ||
| Propagation delay skew | tPSK | -0.35 | 0.35 | μs | RG=10Ω, CG=10nF, f=10kHz, Duty ratio 50% | 7 | |
| Common mode rejection (high level output) | /CMH/ | 15 | kV/μs | Ta=25℃, VCM=1.5kV(p-p), IF=10 to 16mA, VCC=30V, VOH>15V | 7 | ||
| Common mode rejection (low level output) | /CML/ | 15 | kV/μs | Ta=25℃, VCM=1.5kV(p-p), VF=0, VCC=30V, VOL<1.0V | 7 | ||
| Forward current (ON) | IF(ON) | 7 | 16 | mA | 14 | ||
| Forward voltage (OFF) | VF(OFF) | -3 | 0.8 | V | 14 | ||
| Supply voltage | VCC | 15 | 30 | V | 14 | ||
| Operating temperature | Topr | -40 | 100 | ℃ | 14 | ||
| Rise time | tr | 0.1 | μs | RG=10Ω, CG=10nF, f=10kHz, Duty ratio 50% | 7 | ||
| Fall time | tf | 0.1 | μs | RG=10Ω, CG=10nF, f=10kHz, Duty ratio 50% | 7 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper Alloy | Pin material: Copper Alloy | 5 |
CAD (KiCad official)
- Symbol:
PC925LENSZ0F - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
pc925lensz0f-etched.step/pc925lensz0f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pc925lensz0f.step/pc925lensz0f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Sharp Microelectronics datasheet (18 pp, sha256
06dae26128fa795f, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PC925LENSZ0F
**Sharp Microelectronics** · Optocouplers - Logic Output · DIP-8
PC925LENSZ0F from Sharp Microelectronics, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N.C. | unconnected | No internal connection on the primary side. |
| 2 | Anode | input | LED anode; recommended forward current IF(ON) is 7 to 16 mA (25 mA absolute maximum). |
| 3 | Cathode | input | LED cathode; recommended forward voltage in the OFF state VF(OFF) is -3.0 to 0.8 V. |
| 4 | N.C. | unconnected | No internal connection on the primary side. |
| 5 | GND | power_in | Secondary-side ground; a bypass capacitor of 0.1 µF or more is needed between VCC and GND near the device. |
| 6 | VO | output | Gate drive output (totem-pole Tr.1/Tr.2) with peak output current up to 2.5 A; internally connected to pin 7. |
| 7 | VO | output | Gate drive output (totem-pole Tr.1/Tr.2) with peak output current up to 2.5 A; internally connected to pin 6. |
| 8 | VCC | power_in | Supply voltage, recommended 15 to 30 V (35 V absolute maximum), with a 0.1 µF or larger bypass capacitor to GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sharp Microelectronics |
| Package | DIP-8 |
| Category | Optocoupler/LED/Digital Tube/Photoelectric Device |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Forward current | IF | | | 25 | mA | Ta=25℃ | 6 |
| Reverse voltage | VR | | | 5 | V | Ta=25℃ | 6 |
| Peak forward current | IFM | | | 1 | A | Pulse width≦1μs, 300pps | 6 |
| Supply voltage | Vcc | | | 35 | V | Ta=25℃ | 6 |
| Peak output current | Io(PEAK) | | | 2.5 | A | Pulse width≦10μs, Duty ratio : 0.002 | 6 |
| Power dissipation | Po | | | 250 | mW | Ta=25℃ | 6 |
| Total power dissipation | Ptot | | | 295 | mW | Ta=25℃ | 6 |
| Isolation voltage | Viso(rms) | | | 5 | kV | AC for 1 min, 40 to 60%RH, Ta=25℃ | 6 |
| Operating temperature | Topr | -40 | | 100 | ℃ | | 6 |
| Storage temperature | Tstg | -55 | | 125 | ℃ | | 6 |
| Soldering temperature | Tsol | | | 270 | ℃ | For 10s | 6 |
| Forward voltage | VF | 1.2 | | 1.8 | V | Ta=25℃, IF=10mA | 7 |
| Reverse current | IR | | | 10 | μA | VR=5V | 7 |
| Terminal capacitance | Ct | | 60 | 150 | pF | Ta=25℃, V=0, f=1MHz | 7 |
| High level output current | IOH | 0.5 | 1.5 | | A | VO=(VCC-4V), IF(ON) | 7 |
| High level output current | IOH | 2 | | | A | VO=(VCC-15V), IF(ON) | 7 |
| Low level output current | IOL | 0.5 | 2 | | A | VO=2.5V, VF(OFF) | 7 |
| Low level output current | IOL | 2 | | | A | VO=15V, VF(OFF) | 7 |
| Low level output voltage | VOL | | 0.1 | 0.5 | V | IO=0.1A, VF(OFF) | 7 |
| High level supply current | ICCH | | | 3 | mA | IF(ON), output open | 7 |
| Low level supply current | ICCL | | | 3 | mA | VF(OFF), output open | 7 |
| UVLO threshold (positive) | VUVLO+ | 11 | 12.7 | 13.5 | V | VO>5V, IF=10mA | 7 |
| UVLO threshold (negative) | VUVLO- | 9.5 | 11.2 | 12 | V | VO>5V, IF=10mA | 7 |
| UVLO hysteresis | UVLOHYS | | 1.5 | | V | | 7 |
| L→H threshold input current | IFLH | | | 5 | mA | VO>5V, IO=0 | 7 |
| L→H propagation delay time | tPLH | 0.05 | 0.2 | 0.5 | μs | RG=10Ω, CG=10nF, f=10kHz, Duty ratio 50% | 7 |
| H→L propagation delay time | tPHL | 0.05 | 0.2 | 0.5 | μs | RG=10Ω, CG=10nF, f=10kHz, Duty ratio 50% | 7 |
| Distortion of pulse width | ΔtW | | | 0.3 | μs | RG=10Ω, CG=10nF, f=10kHz, Duty ratio 50% | 7 |
| Propagation delay skew | tPSK | -0.35 | | 0.35 | μs | RG=10Ω, CG=10nF, f=10kHz, Duty ratio 50% | 7 |
| Common mode rejection (high level output) | /CMH/ | 15 | | | kV/μs | Ta=25℃, VCM=1.5kV(p-p), IF=10 to 16mA, VCC=30V, VOH>15V | 7 |
| Common mode rejection (low level output) | /CML/ | 15 | | | kV/μs | Ta=25℃, VCM=1.5kV(p-p), VF=0, VCC=30V, VOL<1.0V | 7 |
| Forward current (ON) | IF(ON) | 7 | | 16 | mA | | 14 |
| Forward voltage (OFF) | VF(OFF) | -3 | | 0.8 | V | | 14 |
| Supply voltage | VCC | 15 | | 30 | V | | 14 |
| Operating temperature | Topr | -40 | | 100 | ℃ | | 14 |
| Rise time | tr | | 0.1 | | μs | RG=10Ω, CG=10nF, f=10kHz, Duty ratio 50% | 7 |
| Fall time | tf | | 0.1 | | μs | RG=10Ω, CG=10nF, f=10kHz, Duty ratio 50% | 7 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper Alloy | | Pin material: Copper Alloy | 5 |
## CAD (KiCad official)
- Symbol: `PC925LENSZ0F`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files: `pc925lensz0f-etched.step` / `pc925lensz0f-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pc925lensz0f.step` / `pc925lensz0f.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Sharp Microelectronics datasheet](docs/pc925lensz0f-datasheet.pdf) (18 pp, sha256 `06dae26128fa795f`, retrieved 2026-10-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pc925lensz0f-datasheet.pdf)