component

Paul's LED Nameplate

Public Made by Adom

by adom

USB-C powered desk nameplate PCB spelling PAUL in 36 white 0402 LEDs. Plug in an iPhone charger and the name lights up.

Overview Files Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
Propose a change
Name Last commit message Last updated
2026-05-20T19-00-47.png Migrate asset from Helium wiki 1mo ago
3d.glb Migrate asset from Helium wiki 1mo ago
3d.png Migrate asset from Helium wiki 1mo ago
index.html Migrate asset from Helium wiki 1mo ago
page.json Remove internal identifiers from page.json 10d ago
paul-led-nameplate-source.tar.gz Migrate asset from Helium wiki 1mo ago
pcb.svg Migrate asset from Helium wiki 1mo ago
plan.md Migrate asset from Helium wiki 1mo ago
README.md Initial commit: component/paul-led-nameplate 1mo ago
schematic.svg Migrate asset from Helium wiki 1mo ago

Overview

A desk nameplate PCB that spells PAUL in 36 white 0402 LEDs, powered by a USB-C connector. Plug in any iPhone charger and the name lights up.

Design

  • Font: 3x5 pixel dot-matrix, 3 mm pitch, 4 mm letter gap
  • LEDs: 36 white 0402 (P=8, A=10, U=11, L=7)
  • Current limiting: 36x 220 ohm 0402 resistors (~14 mA per LED)
  • Power: USB-C (TYPE-C-31-M-12) with 5.1k CC pulldowns for default 5V
  • Board: 64x24 mm, 2-layer, rounded edges
  • Total draw: ~504 mA (within USB-C default 900 mA budget)

Circuit

All LEDs wired in parallel: VBUS -> 220 ohm resistor -> LED anode, cathode -> GND. A 100 nF bypass cap smooths the VBUS rail. Two 5.1k resistors on CC1/CC2 tell the USB-C host to supply 5V.

Built with tscircuit + adom-tsci.