PAM8906M1012-13

{
  "slug": "pam8906m1012-13",
  "version": "0.1.0",
  "type": "component",
  "description": "Diodes Incorporated Interface - Specialized, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "communication interface chip",
    "pam8906m1012-13",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pam8906m1012-13.kicad_sym",
    "pam8906m1012-13.kicad_mod",
    "pam8906m1012-13.glb",
    "pam8906m1012-13.step",
    "pam8906m1012-13.lbr",
    "docs/hero.png",
    "docs/pam8906m1012-13-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "pam8906m1012-13-hero.glb",
    "pam8906m1012-13-hero.overlay.json",
    "pam8906m1012-13-etched.glb"
  ],
  "component": {
    "mpn": "PAM8906M1012-13",
    "manufacturer": "Diodes Incorporated",
    "package": "MSOP-10",
    "pin_count": 10,
    "category": "Communication Interface Chip",
    "subcategory": "Interface - Specialized",
    "datasheet": "https://www.diodes.com/assets/Datasheets/PAM8906M1012-13.pdf",
    "parts": {
      "symbol": "pam8906m1012-13.kicad_sym",
      "footprint": "pam8906m1012-13.kicad_mod",
      "model_3d": "pam8906m1012-13-hero.glb",
      "model_3d_plain": "pam8906m1012-13-etched.glb",
      "model_3d_step": "pam8906m1012-13-etched.step",
      "model_3d_step_plain": "pam8906m1012-13.step",
      "lbr": "pam8906m1012-13.lbr"
    },
    "distributor_links": {
      "lcsc": "C17448443",
      "digikey": "31-PAM8906M1012-13TR-ND",
      "mouser": "621-PAM8906M1012-13"
    },
    "distributor_check": {
      "checked_at": "2026-10-23T03:05:43Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "31-PAM8906M1012-13TR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "621-PAM8906M1012-13",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_out",
        "description": "Internal 5V LDO output supplying the boost and piezo driver blocks; a 1µF capacitor (16V rating) is recommended at this pin."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; connect to the bottom of the IC and expand to the VCC/VIN/VOUT capacitor grounds."
      },
      {
        "number": "3",
        "name": "BOOT",
        "type": "passive",
        "description": "Bootstrap capacitor connection; use a 0.1µF capacitor rated 25V or higher placed close to the pin."
      },
      {
        "number": "4",
        "name": "SW",
        "type": "bidirectional",
        "description": "Switch pin of the boost converter; connect to the external inductor (0.47µH typical), with an optional Schottky to VOUT."
      },
      {
        "number": "5",
        "name": "VOUT",
        "type": "power_out",
        "description": "Boost converter output (12V option for this MPN); use a 1µF to 2.2µF capacitor rated 3 x VOUT, with a maximum of 25V on this pin."
      },
      {
        "number": "6",
        "name": "OUTN",
        "type": "output",
        "description": "Negative sounder output of the piezo driver, high-impedance in shutdown, with a maximum of 25V."
      },
      {
        "number": "7",
        "name": "OUTP",
        "type": "output",
        "description": "Positive sounder output of the piezo driver, high-impedance in shutdown, with a maximum of 25V."
      },
      {
        "number": "8",
        "name": "FB",
        "type": "input",
        "description": "Feedback pin for a 3-terminal sounder; connect to VOUT when using a 2-terminal sounder."
      },
      {
        "number": "9",
        "name": "DIN",
        "type": "input",
        "description": "PWM signal input that also enables/shuts down the device, with VIH of 1.5V to VIN, VIL of 0 to 0.4V and shutdown after DIN is low for 100ms (typ)."
      },
      {
        "number": "10",
        "name": "VIN",
        "type": "power_in",
        "description": "Battery supply input, 2.1V to 5.5V operating (absolute maximum 6.0V), decoupled with 1µF plus 10µF."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 11,
        "cost_usd": 0.104,
        "at": "2026-10-23T03:05:19"
      },
      "datasheet": {
        "url": "https://www.diodes.com/assets/Datasheets/PAM8906M1012-13.pdf",
        "pages": 11,
        "sha256": "44dc52c48dcda8f0",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pam8906m1012-13.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pam8906m1012-13-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "8bd1e1bae9348693eb5947188a985feefbb28b0a80a65f665aae5d11b80897ab",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}