main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs pam8904jer: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pam8904jer: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json pam8904jer: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
pam8904jer-etched.fit.json pam8904jer: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pam8904jer-etched.glb pam8904jer: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pam8904jer-etched.step pam8904jer: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pam8904jer.glb Publish 0.1.0 · Ray
pam8904jer.kicad_mod Publish 0.1.0 · Ray
pam8904jer.kicad_sym Publish 0.1.0 · Ray
pam8904jer.lbr Publish 0.1.0 · Ray
pam8904jer.step Publish 0.1.0 · Ray
README.md pam8904jer: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

PAM8904JER

Diodes Incorporated · Audio Power OpAmps · TQFN-16-EP(3x3)

PAM8904JER from Diodes Incorporated, in a TQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN1 input Charge pump mode select 1. Digital input used with EN2 to select shutdown, 1x, 2x, or 3x charge pump modes. VIH >= 0.5*VIN, VIL <= 0.4V.
2 EN2 input Charge pump mode select 2. Digital input used with EN1 to select shutdown, 1x, 2x, or 3x charge pump modes. VIH >= 0.5*VIN, VIL <= 0.4V.
3 DIN input Signal input. Rectangular pulse drives the piezo. DIN=0 forces shutdown. Typical input frequency 4kHz.
4 NC unconnected No connection. Leave floating or tie to GND.
5 CN1 passive Charge pump flying capacitor 1 negative terminal. Connect 1uF capacitor between CP1 and CN1.
6 GND power_in Ground reference for the device.
7 VO2 output Positive output to piezo sounder. Drives one terminal of the ceramic/piezo transducer (single-ended or differential with VO1).
8 NC unconnected No connection. Leave floating or tie to GND.
9 VO1 output Negative output to piezo sounder. Drives the opposite terminal of the ceramic/piezo transducer (single-ended or differential with VO2).
10 CN2 passive Charge pump flying capacitor 2 negative terminal. Connect 1uF capacitor between CP2 and CN2.
11 CP1 passive Charge pump flying capacitor 1 positive terminal. Connect 1uF capacitor between CP1 and CN1.
12 NC unconnected No connection. Leave floating or tie to GND.
13 VOUT power_out Boost output. Charge pump output providing 1x/2x/3x VIN (up to ~12V typ, 13.5V max). Requires 2.2uF output capacitor to GND.
14 CP2 passive Charge pump flying capacitor 2 positive terminal. Connect 1uF capacitor between CP2 and CN2.
15 VIN power_in Power supply input. Operating range 1.8V to 5.5V. Requires 2.2uF input decoupling capacitor to GND.
16 NC unconnected No connection. Leave floating or tie to GND.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package TQFN-16-EP(3x3)
Category Op-amp/Cmp
Pins 16

Ordering variants

Same part, different packaging or reel option.

  • PAM8904JER
  • PAM8904JERJPR
  • PAM8904JERGPR

CAD (KiCad official)

  • Symbol: PAM8904JER
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: TQFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: pam8904jer-etched.step / pam8904jer-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pam8904jer.step / pam8904jer.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (10 pp, sha256 49d251123d3e4e62, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF