main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs pam8404kgr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pam8404kgr: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
pam8404kgr-etched.fit.json pam8404kgr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pam8404kgr-etched.glb pam8404kgr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pam8404kgr-etched.step pam8404kgr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pam8404kgr.glb Publish 0.1.0 · Ray
pam8404kgr.kicad_mod Publish 0.1.0 · Ray
pam8404kgr.kicad_sym Publish 0.1.0 · Ray
pam8404kgr.lbr Publish 0.1.0 · Ray
pam8404kgr.step Publish 0.1.0 · Ray
README.md pam8404kgr: specified limits as data (metadata.characteristics, 45 rows from the datasheet) · Ray

PAM8404KGR

Diodes Incorporated · Audio Power OpAmps · QFN-20-EP(4x4)

PAM8404KGR from Diodes Incorporated, in a QFN-20-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 G1 input Gain select MSB. Together with G0 selects closed-loop gain of 6/12/18/24 dB (2/4/8/16 V/V). Internal 300kΩ pull-down in the QFN package.
2 OUTL+ output Left channel positive differential Class-D H-bridge output. Drives the + terminal of the left speaker (typ. 4Ω or 8Ω) with a ~300 kHz PWM signal.
3 PVDD power_in Power-stage supply for the output H-bridges (2.5V to 5.5V). Must be tied to the same rail as AVDD. Decouple with 1µF ceramic close to the pin and a bulk 10µF nearby.
4 PGND power_in Power ground return for the output H-bridges. Route separately from AGND back to system ground to keep Class-D switching currents out of the analog path.
5 OUTL- output Left channel negative differential Class-D H-bridge output. Drives the − terminal of the left speaker as a BTL pair with OUTL+.
6 NC unconnected Not connected. Leave floating or tie to ground; no internal connection.
7 /SDL input Left channel shutdown, active low. Pulling to GND puts the left channel into low-power shutdown (ISD < 1µA). Drive high (or to VDD) for normal operation.
8 /SDR input Right channel shutdown, active low. Pulling to GND puts the right channel into low-power shutdown (ISD < 1µA). Drive high (or to VDD) for normal operation.
9 AVDD power_in Analog supply for the input stage and bias circuitry (2.5V to 5.5V). Must be tied to the same rail as PVDD. Decouple with 1µF close to the pin and a 10µF bulk capacitor nearby.
10 NC unconnected Not connected. Leave floating or tie to ground; no internal connection.
11 OUTR- output Right channel negative differential Class-D H-bridge output. Drives the − terminal of the right speaker as a BTL pair with OUTR+.
12 PGND power_in Power ground return for the output H-bridges (tie to pin 4). Route separately from AGND back to system ground to isolate Class-D switching currents.
13 PVDD power_in Power-stage supply for the output H-bridges (tie to pin 3, 2.5V to 5.5V). Must be same rail as AVDD. Decouple with 1µF ceramic close to the pin.
14 OUTR+ output Right channel positive differential Class-D H-bridge output. Drives the + terminal of the right speaker with a ~300 kHz PWM signal.
15 G0 input Gain select LSB. Together with G1 selects closed-loop gain of 6/12/18/24 dB. Internal 300kΩ pull-down in the QFN package.
16 INR+ input Right channel positive audio input. AC-couple through CI (typ. 0.22µF) to the source; input impedance depends on gain setting (5.2-28.1kΩ).
17 INR- input Right channel negative audio input. AC-couple through CI (typ. 0.22µF); for single-ended sources tie to signal ground through a matching capacitor.
18 AGND power_in Analog ground reference for the input stage and bias. Route as quiet ground for signal components; tie to system ground at a single point separate from PGND.
19 INL- input Left channel negative audio input. AC-couple through CI (typ. 0.22µF); for single-ended sources tie to signal ground through a matching capacitor.
20 INL+ input Left channel positive audio input. AC-couple through CI (typ. 0.22µF) to the source; input impedance is gain-dependent (5.2-28.1kΩ).

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package QFN-20-EP(4x4)
Category Op-amp/Cmp
Pins 20

Ordering variants

  • PAM8404KGR
  • PAM8404KGRZER

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (VDD) range VDD 2.5 5.5 V 4
Shutdown Current (QFN) ISD 1 µA VDD = 2.5V to 5.5V, VSD = 0.3V 4
Supply Voltage (absolute maximum) 6 V 3
Input Voltage -0.3 upper limit printed as VDD + 0.3; unit not printed 3
Maximum Junction Temperature 150 unit not printed 3
Storage Temperature -65 150 °C 3
Soldering Temperature 250 10 sec; unit not printed 3
Supply Voltage Range (recommended) 2.5 5.5 V 3
Operation Temperature Range -40 85 °C 3
Junction Temperature Range -40 125 °C 3
Thermal Resistance Junction to Ambient (U-QFN4040-20) θJA 31 °C/W U-QFN4040-20 package 3
Thermal Resistance Junction to Case (U-QFN4040-20) θJC 13 °C/W U-QFN4040-20 package 3
Output Power PO 3 W THD+N = 10%, f = 1kHz, RL = 4Ω, VDD = 5.0V 4
Output Power PO 1.5 W THD+N = 10%, f = 1kHz, RL = 4Ω, VDD = 3.6V 4
Output Power PO 2.35 W THD+N = 1%, f = 1kHz, RL = 4Ω, VDD = 5.0V 4
Output Power PO 1.2 W THD+N = 1%, f = 1kHz, RL = 4Ω, VDD = 3.6V 4
Output Power PO 1.7 W THD+N = 10%, f = 1kHz, RL = 8Ω, VDD = 5.0V 4
Output Power PO 0.9 W THD+N = 10%, f = 1kHz, RL = 8Ω, VDD = 3.6V 4
Output Power PO 1.4 W THD+N = 1%, f = 1kHz, RL = 8Ω, VDD = 5.0V 4
Output Power PO 0.7 W THD+N = 1%, f = 1kHz, RL = 8Ω, VDD = 3.6V 4
Total Harmonic Distortion Plus Noise THD+N 0.15 % VDD = 5.0V, Po = 0.5W, RL = 8Ω, f = 1kHz 4
Total Harmonic Distortion Plus Noise THD+N 0.27 % VDD = 3.6V, Po = 0.5W, RL = 8Ω 4
Total Harmonic Distortion Plus Noise THD+N 0.23 % VDD = 5.0V, Po = 1W, RL = 4Ω, f = 1kHz 4
Total Harmonic Distortion Plus Noise THD+N 0.24 % VDD = 3.6V, Po = 1W, RL = 4Ω 4
Power Supply Ripple Rejection PSRR -48 dB VDD = 5.0V, inputs AC-grounded with CIN = 1.0μF, f = 100kHz 4
Power Supply Ripple Rejection PSRR -63 dB VDD = 5.0V, inputs AC-grounded with CIN = 1.0μF, f = 1kHz 4
Crosstalk CS -93 dB VDD = 5V, Po = 0.5W, RL = 4Ω, Gv = 23dB, f = 1kHz 4
Signal-to-Noise Ratio SNR 87 dB VDD = 5V, VORMS = 1V, Gv = 23dB, A-weighting 4
Output Noise VN 43 µV VDD = 5V, inputs AC-grounded with CIN = 1μF, A-weighting 4
Output Noise (bandwidth 22Hz to 22kHz, no A-weighting) BW 59 µV 22Hz – 22kHz, no A-weighting 4
Dynamic Range Dyn 97 dB VDD = 5V, THD = 1%, A-weighting 4
Efficiency η 89 % RL = 8Ω, THD = 10%, f = 1kHz 4
Efficiency η 84 % RL = 4Ω, THD = 10% 4
Quiescent Current IQ 11 mA VDD = 5.0V, no load 4
Quiescent Current IQ 6 mA VDD = 3.6V 4
Static Drain-to-Source On-State Resistance, PMOS RDS(ON) 250 mΩ IDS = 500mA, VGS = 5V 4
Static Drain-to-Source On-State Resistance, NMOS RDS(ON) 170 mΩ IDS = 500mA, VGS = 5V 4
Switching Frequency fsw 300 kHz VDD = 3V to 5V 4
Output Offset Voltage VOS 10 mV VIN = 0V, VDD = 5V 4
Closed-Loop Voltage Gain Gain 6 dB VDD = 5V, RL = 4Ω, f = 1kHz, G0 = L, G1 = L 4
Closed-Loop Voltage Gain Gain 12 dB VDD = 5V, RL = 4Ω, f = 1kHz, G0 = H, G1 = L 4
Closed-Loop Voltage Gain Gain 18 dB VDD = 5V, RL = 4Ω, f = 1kHz, G0 = L, G1 = H 4
Closed-Loop Voltage Gain Gain 24 dB VDD = 5V, RL = 4Ω, f = 1kHz, G0 = H, G1 = H 4
Overtemperature Protection OTP 150 °C No load, junction temperature, VDD = 5V 4
Overtemperature Hysteresis OTH 50 °C 4

CAD (KiCad official)

  • Symbol: PAM8404KGR
  • Footprint: Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm
  • 3D model: QFN-20-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: pam8404kgr-etched.step / pam8404kgr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pam8404kgr.step / pam8404kgr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (None pp, sha256 7f94eeb297192eb9, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF