component
PAM8008DR
Public Made by Adomby adom
Diodes Incorporated Audio Amplifiers, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPAM8008DR
Diodes Incorporated · Audio Amplifiers · SOIC-16
PAM8008DR from Diodes Incorporated, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SD | input | Full chip shutdown control input, active low; the amplifier bias is turned off when logic low is applied, and the pin has an internal pull-up so it may be left floating. |
| 2 | BYPASS | passive | Bias voltage node for the power amplifiers, where the analog reference bypass capacitor CBYP (0.47µF to 1.0µF ceramic recommended) sets start-up rate and noise. |
| 3 | RINN | input | Negative input of the right channel power amplifier. |
| 4 | PL | input | Power limit setting pin: connect to GND or leave floating for power limit at 2.5W, connect high for anti-saturation or power limit depending on VDD, or connect to VDD/2 to disable both functions. |
| 5 | GND | power_in | Ground connection; one of three GND pins (with pins 12 and 13) that serve as the return for Class-D output noise currents. |
| 6 | LINN | input | Negative input of the left channel power amplifier. |
| 7 | VOLUME | input | DC volume control input that sets the Class-D gain using the 64-step table from -58.62 dB to +19.84 dB. |
| 8 | MUTE | input | Mute control input, active high: logic high disables the Class-D outputs and logic low enables them, with an internal pull-down so it may be left floating. |
| 9 | LOUTP | output | Positive output of the left channel power amplifier (Class-D output). |
| 10 | VDD | power_in | Power supply pin; recommended supply range is 2.5 V to 5.5 V and the absolute maximum is 6.0 V. |
| 11 | LOUTN | output | Negative output of the left channel power amplifier (Class-D output). |
| 12 | GND | power_in | Ground connection; one of three GND pins (with pins 5 and 13) that serve as the return for Class-D output noise currents. |
| 13 | GND | power_in | Ground connection; one of three GND pins (with pins 5 and 12) that serve as the return for Class-D output noise currents. |
| 14 | ROUTN | output | Negative output of the right channel power amplifier (Class-D output). |
| 15 | VDD | power_in | Power supply pin; recommended supply range is 2.5 V to 5.5 V and the absolute maximum is 6.0 V. |
| 16 | ROUTP | output | Positive output of the right channel power amplifier (Class-D output). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOIC-16 |
| Category | Amplifiers/Comparators |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VDD | 2.5 | 5.5 | V | 4 | ||
| Quiescent Current | IQ | 8 | mA | No Load | 4 | ||
| Output Offset Voltage | VOS | 10 | mV | No Load | 4 | ||
| Mute Current | IMUTE | 4 | 10 | mA | MUTE = VDD | 4 | |
| Shutdown Current | ISD | 1 | µA | VSD = 0V | 4 | ||
| Logic Input High | VIH | 1.4 | V | 4 | |||
| Logic Input Low | VIL | 0.6 | V | 4 | |||
| Oscillator Frequency | fOSC | 200 | 250 | 300 | kHz | 4 | |
| Supply Voltage Range | VDD | 2.5 | 5.5 | V | 3 | ||
| Ambient Operation Temperature Range | TA | -20 | 85 | °C | 3 | ||
| Junction Temperature Range | TJ | -20 | 125 | °C | 3 | ||
| Supply Voltage | VDD | 6 | V | 3 | |||
| Input Voltage | VIN | -0.3 | V | Upper limit printed as VDD +0.3 V | 3 | ||
| Operational Junction Temperature | TJ | -40 | 125 | °C | 3 | ||
| Storage Temperature | TSTG | -65 | 150 | °C | 3 | ||
| Soldering Temperature | 300 | °C | 5 sec | 3 | |||
| Thermal Resistance (Junction to Ambient) | θJA | 110 | °C/W | SOP-16L | 3 | ||
| Thermal Resistance (Junction to Case) | θJC | 23 | °C/W | SOP-16L | 3 |
CAD (KiCad official)
- Symbol:
PAM8008DR - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
pam8008dr-etched.step/pam8008dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pam8008dr.step/pam8008dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (14 pp, sha256
d7cc288b39337834, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).