main
Ray
Publish 0.1.0
d280b88
PAM2861ABR
Diodes Incorporated · LED Drivers · TSOT-25
PAM2861ABR from Diodes Incorporated, in a TSOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LX | output | Drain of the internal NDMOS switch, with the LX pin voltage limited to -0.3 V to +40 V absolute maximum. |
| 2 | GND | power_in | Ground reference (0 V) for the device; all voltages are referenced to ground. |
| 3 | VSET | input | Multi-function on/off and brightness control: below 0.2 V turns the output off, 0.3 V to 2.5 V gives DC adjustment from 12% to 100% of IOUTnom, PWM from an open-collector or open-drain drive adjusts output current, and the pin is limited to -0.3 V to +6.0 V. |
| 4 | ISENSE | input | Connect the sense resistor RS from this pin to VIN to set the nominal average output current, IOUTnom = 0.1/RS. |
| 5 | VIN | power_in | Input supply, 6 V to 40 V; decouple to ground with 10 µF or higher X7R ceramic capacitor placed close to the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TSOT-25 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 6 | 40 | V | 4 | ||
| Shutdown Current | ISD | 20 | 40 | µA | VSET Pin Grouded | 4 | |
| Mean Current Sense Threshold Voltage | VSENSE | 95 | 100 | 105 | mV | Measured on ISENSE Pin with Respect to VIN | 4 |
| ISENSE Pin Input Current | ISENSE | -0.1 | 8 | µA | VSENSE = VIN | 4 | |
| VSET Range on VSET Pin | VEN | 0.3 | 2.5 | V | For DC Dimming | 4 | |
| LX Switch Leakage Current | ILX(LEAK) | 5 | µA | 4 | |||
| Recommended Maximum Switch Frequency | FLX(MAX) | 1 | MHz | 4 | |||
| Max Duty Circle | 98 | % | 4 | ||||
| Recommended Duty Cycle Range | DLX | 25 | 75 | % | 4 | ||
| Input Voltage Range | -0.3 | 40 | V | 3 | |||
| LX, ISENSE Pin Voltage | -0.3 | 40 | V | 3 | |||
| VSET Pin Voltage | -0.3 | 6 | V | 3 | |||
| Maximum Junction Temperature | 170 | °C | 3 | ||||
| Storage Temperature | -65 | 170 | °C | 3 | |||
| Input Voltage Range (recommended) | 6 | 40 | V | 3 | |||
| Ambient Temperature Range | -40 | 85 | °C | 3 | |||
| Junction Temperature Range | -40 | 150 | °C | 3 | |||
| Thermal Resistance (Junction to Ambient), TSOT25 | θJA | 250 | °C/W | 3 | |||
| Thermal Resistance (Junction to Case), TSOT25 | θJC | 130 | °C/W | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per M2003 JESD22-B102 Weight: 0.013 grams (Approximate) | 11 |
CAD (KiCad official)
- Symbol:
PAM2861ABR - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-25 (KiCad packages3D, STEP)
- 3D model files:
pam2861abr-etched.step/pam2861abr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pam2861abr.step/pam2861abr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (12 pp, sha256
10db5ebfd993c593, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PAM2861ABR
**Diodes Incorporated** · LED Drivers · TSOT-25
PAM2861ABR from Diodes Incorporated, in a TSOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LX | output | Drain of the internal NDMOS switch, with the LX pin voltage limited to -0.3 V to +40 V absolute maximum. |
| 2 | GND | power_in | Ground reference (0 V) for the device; all voltages are referenced to ground. |
| 3 | VSET | input | Multi-function on/off and brightness control: below 0.2 V turns the output off, 0.3 V to 2.5 V gives DC adjustment from 12% to 100% of IOUTnom, PWM from an open-collector or open-drain drive adjusts output current, and the pin is limited to -0.3 V to +6.0 V. |
| 4 | ISENSE | input | Connect the sense resistor RS from this pin to VIN to set the nominal average output current, IOUTnom = 0.1/RS. |
| 5 | VIN | power_in | Input supply, 6 V to 40 V; decouple to ground with 10 µF or higher X7R ceramic capacitor placed close to the device. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TSOT-25 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 6 | | 40 | V | | 4 |
| Shutdown Current | ISD | | 20 | 40 | µA | VSET Pin Grouded | 4 |
| Mean Current Sense Threshold Voltage | VSENSE | 95 | 100 | 105 | mV | Measured on ISENSE Pin with Respect to VIN | 4 |
| ISENSE Pin Input Current | ISENSE | -0.1 | | 8 | µA | VSENSE = VIN | 4 |
| VSET Range on VSET Pin | VEN | 0.3 | | 2.5 | V | For DC Dimming | 4 |
| LX Switch Leakage Current | ILX(LEAK) | | | 5 | µA | | 4 |
| Recommended Maximum Switch Frequency | FLX(MAX) | | | 1 | MHz | | 4 |
| Max Duty Circle | | | | 98 | % | | 4 |
| Recommended Duty Cycle Range | DLX | 25 | | 75 | % | | 4 |
| Input Voltage Range | | -0.3 | | 40 | V | | 3 |
| LX, ISENSE Pin Voltage | | -0.3 | | 40 | V | | 3 |
| VSET Pin Voltage | | -0.3 | | 6 | V | | 3 |
| Maximum Junction Temperature | | | | 170 | °C | | 3 |
| Storage Temperature | | -65 | | 170 | °C | | 3 |
| Input Voltage Range (recommended) | | 6 | | 40 | V | | 3 |
| Ambient Temperature Range | | -40 | | 85 | °C | | 3 |
| Junction Temperature Range | | -40 | | 150 | °C | | 3 |
| Thermal Resistance (Junction to Ambient), TSOT25 | θJA | | | 250 | °C/W | | 3 |
| Thermal Resistance (Junction to Case), TSOT25 | θJC | | | 130 | °C/W | | 3 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per M2003 JESD22-B102 Weight: 0.013 grams (Approximate) | 11 |
## CAD (KiCad official)
- Symbol: `PAM2861ABR`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-5`
- 3D model: TSOT-25 (KiCad packages3D, STEP)
- 3D model files: `pam2861abr-etched.step` / `pam2861abr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pam2861abr.step` / `pam2861abr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://www.diodes.com/assets/Datasheets/PAM2861ABR.pdf) (12 pp, sha256 `10db5ebfd993c593`, retrieved 2026-10-27, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pam2861abr-datasheet.pdf)