Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PAM2401SCADJ

Diodes Incorporated · DC-DC Converters · MSOP-8

PAM2401SCADJ from Diodes Incorporated, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LX passive Switch node. Connects to the drain of the internal N-channel MOSFET and source of the P-channel synchronous rectifier; the external boost inductor ties from VIN to this pin.
2 EN input Enable control input. VH ≥ 1.5V (VIN=3.3V) or ≥ 0.8V (VIN=0.9V) turns the converter on; VL ≤ 0.2V (VIN>1.2V) puts the part into <1µA shutdown.
3 VIN power_in Input supply pin, 0.9V to 4.75V operating range (absolute max +6.0V). Bypass with at least a 10µF ceramic capacitor located close to the IC.
4 AGND power_in Analog ground. Reference for the control circuitry; connect to the system ground plane.
5 FB input Feedback pin, internally regulated to 0.6V. Connect the tap of an external resistor divider from VOUT to set the output voltage per VOUT = 0.6 × (1 + R1/R2).
6 RSET input Programmable current-limit setting pin. An external resistor to GND selects the N-channel current limit (e.g. 66kΩ → 1A, 100kΩ → 1.5A, floating or >200kΩ → 3A).
7 OUT power_out Regulated boost output pin, adjustable 2.5V to 5.0V. Also senses the output for the true-disconnect P-MOSFET and internal OVP/PG comparators; bypass with a minimum 22µF ceramic capacitor.
8 PGND power_in Power ground return for the internal N-channel switch. Connect with a low-impedance path to the input and output capacitor grounds.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package MSOP-8
Category PMIC
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • PAM2401SCADJ
  • PAM2401SCADJYPADJ

CAD (KiCad official)

  • Symbol: PAM2401SCADJ
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: pam2401scadj-etched.step / pam2401scadj-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pam2401scadj.step / pam2401scadj.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (10 pp, sha256 e3a025eaf6ee1a54, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF