main
Ray Publish 0.1.0 df632c8
{
  "slug": "pam2319ayaa",
  "version": "0.1.0",
  "type": "component",
  "description": "Diodes Incorporated DC-DC Converters, WDFN-12-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "pam2319ayaa",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pam2319ayaa.kicad_sym",
    "pam2319ayaa.kicad_mod",
    "pam2319ayaa.glb",
    "pam2319ayaa.step",
    "pam2319ayaa.lbr",
    "docs/hero.png",
    "docs/pam2319ayaa-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "pam2319ayaa-hero.glb",
    "pam2319ayaa-hero.overlay.json",
    "pam2319ayaa-etched.glb"
  ],
  "component": {
    "mpn": "PAM2319AYAA",
    "manufacturer": "Diodes Incorporated",
    "package": "WDFN-12-EP(3x3)",
    "pin_count": 13,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.diodes.com/assets/Datasheets/PAM2319AYAA.pdf",
    "parts": {
      "symbol": "pam2319ayaa.kicad_sym",
      "footprint": "pam2319ayaa.kicad_mod",
      "model_3d": "pam2319ayaa-hero.glb",
      "model_3d_plain": "pam2319ayaa-etched.glb",
      "model_3d_step": "pam2319ayaa-etched.step",
      "model_3d_step_plain": "pam2319ayaa.step",
      "lbr": "pam2319ayaa.lbr"
    },
    "distributor_links": {
      "lcsc": "C2071057"
    },
    "distributor_check": {
      "checked_at": "2026-10-27T07:21:30Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "FB2",
        "type": "input",
        "description": "Channel 2 feedback pin internally set to 0.6V."
      },
      {
        "number": "2",
        "name": "VIN2",
        "type": "power_in",
        "description": "Input voltage pin of channel 2, operating range 2.7V to 5.5V."
      },
      {
        "number": "3",
        "name": "AGND2",
        "type": "power_in",
        "description": "Signal ground of channel 2 for small signal components."
      },
      {
        "number": "4",
        "name": "VIN1",
        "type": "power_in",
        "description": "Input voltage pin of channel 1, operating range 2.7V to 5.5V."
      },
      {
        "number": "5",
        "name": "PGND1",
        "type": "power_in",
        "description": "Main power ground pin of channel 1; should connect to the input capacitor GND rather than directly to the thermal pad."
      },
      {
        "number": "6",
        "name": "SW1",
        "type": "output",
        "description": "Channel 1 switching pin, the drains of the internal main and synchronous power MOSFET."
      },
      {
        "number": "7",
        "name": "FB1",
        "type": "input",
        "description": "Channel 1 feedback pin internally set to 0.6V."
      },
      {
        "number": "8",
        "name": "AGND1",
        "type": "power_in",
        "description": "Signal ground of channel 1 for small signal components."
      },
      {
        "number": "9",
        "name": "EN1",
        "type": "input",
        "description": "Enable control input; pull logic high to enable Vo1 and logic low to disable."
      },
      {
        "number": "10",
        "name": "EN2",
        "type": "input",
        "description": "Enable control input; pull logic high to enable Vo2 and logic low to disable."
      },
      {
        "number": "11",
        "name": "PGND2",
        "type": "power_in",
        "description": "Main power ground pin of channel 2."
      },
      {
        "number": "12",
        "name": "SW2",
        "type": "output",
        "description": "Channel 2 switching pin, the drains of the internal main and synchronous power MOSFET."
      },
      {
        "number": "13",
        "name": "EP",
        "type": "power_in",
        "description": "Exposed pad, connect to GND and solder to the PCB for thermal dissipation."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Exposed pad is listed as '—' in the pin table; number '13' is assigned by convention and is not prin; Ordering table lists PAM2319AYAA in W-DFN3x3-12L; the package hint says WDFN-12-EP(3x3), which is co",
          "1/13 pins cited to the wrong page (name found elsewhere): ['13:EP@p2']"
        ],
        "pages_sent": 12,
        "cost_usd": 0.0993,
        "at": "2026-10-27T07:21:08"
      },
      "datasheet": {
        "url": "https://www.diodes.com/assets/Datasheets/PAM2319AYAA.pdf",
        "pages": 12,
        "sha256": "37edd8baf91ca895",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 13,
        "described": 13,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pam2319ayaa.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.9,
          0.6
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c480e4f33893f3811b2c745e14f4e19e88b67803c9e7bfd2184ac92b57acba49",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pam2319ayaa-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.9,
          0.6
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b64372717d4c1668f9dbc6aefaf8a286e0ed5c780e453a17e87834d357c9fd64",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}