main
Ray
Publish 0.1.0
30d642d
PA3855.003NLT
Pulse Electronics · Transformers · Unknown
PA3855.003NLT from Pulse Electronics, in an Unknown. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Primary winding (1-3), dotted end. 41 uH +/-10%, 62 mOhm max DCR; 33-57 V, 200 kHz input side. |
| 2 | 2 | unspecified | Lead present in Pulse's mechanical drawing and land (p.4, 10 leads) but absent from the PA3855.003NL schematic and from every inductance/DCR/hi-pot row (p.1); the sheet does not say whether it connects to anything. Treat as unconnected unless Pulse confirms otherwise. |
| 3 | 3 | passive | Primary winding (1-3), undotted end. |
| 4 | 4 | passive | Auxiliary winding (4-5), dotted end. 10 V, 50 mA; 120 mOhm max DCR; 1:1 to the 10-7 secondary. |
| 5 | 5 | passive | Auxiliary winding (4-5), undotted end. |
| 6 | 6 | passive | Secondary winding (9-6), undotted end. |
| 7 | 7 | passive | Secondary winding (10-7), undotted end. |
| 8 | 8 | unspecified | Lead present in Pulse's mechanical drawing and land (p.4, 10 leads) but absent from the PA3855.003NL schematic and from every inductance/DCR/hi-pot row (p.1); the sheet does not say whether it connects to anything. Treat as unconnected unless Pulse confirms otherwise. |
| 9 | 9 | passive | Secondary winding (9-6), dotted end. 12 V, 1.5 A; 20 mOhm max DCR; turns ratio 2.67:1 (pri:sec). |
| 10 | 10 | passive | Secondary winding (10-7), dotted end. 12 V, 1.5 A; 23 mOhm max DCR. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Pulse Electronics |
| Package | Unknown |
| Category | Transformers |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DCR | DCR | 62 | mΩ | Pins (1-3) | 1 | ||
| DCR | DCR | 20 | mΩ | Pins (9-6) | 1 | ||
| DCR | DCR | 23 | mΩ | Pins (10-7) | 1 | ||
| DCR | DCR | 120 | mΩ | Pins (4-5) | 1 | ||
| Leakage inductance | Lk | 0.67 | uH | Pins (10,9,6,7,4,5) shorted | 1 | ||
| Hi-Pot Pri-Sec | 2250 | Vdc | Pri-Sec | 1 | |||
| Primary inductance tolerance | -10 | 10 | % | 1 | |||
| Primary inductance | Lpri | 41 | uH | Pins (1-3) | 1 |
CAD (Adom-generated)
- Symbol:
PA3855.003NLT - Footprint:
Adom_Gen:Pulse_Electronics_PA3855_26c196 - 3D model: generated to fit the land (STEP)
- 3D model files:
pa3855-003nlt-etched.step/pa3855-003nlt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pa3855-003nlt.step/pa3855-003nlt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Pulse Electronics datasheet (5 pp, sha256
bbde64296ac74e15, retrieved 2026-11-18) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
# PA3855.003NLT
**Pulse Electronics** · Transformers · Unknown
PA3855.003NLT from Pulse Electronics, in an Unknown. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Primary winding (1-3), dotted end. 41 uH +/-10%, 62 mOhm max DCR; 33-57 V, 200 kHz input side. |
| 2 | 2 | unspecified | Lead present in Pulse's mechanical drawing and land (p.4, 10 leads) but absent from the PA3855.003NL schematic and from every inductance/DCR/hi-pot row (p.1); the sheet does not say whether it connects to anything. Treat as unconnected unless Pulse confirms otherwise. |
| 3 | 3 | passive | Primary winding (1-3), undotted end. |
| 4 | 4 | passive | Auxiliary winding (4-5), dotted end. 10 V, 50 mA; 120 mOhm max DCR; 1:1 to the 10-7 secondary. |
| 5 | 5 | passive | Auxiliary winding (4-5), undotted end. |
| 6 | 6 | passive | Secondary winding (9-6), undotted end. |
| 7 | 7 | passive | Secondary winding (10-7), undotted end. |
| 8 | 8 | unspecified | Lead present in Pulse's mechanical drawing and land (p.4, 10 leads) but absent from the PA3855.003NL schematic and from every inductance/DCR/hi-pot row (p.1); the sheet does not say whether it connects to anything. Treat as unconnected unless Pulse confirms otherwise. |
| 9 | 9 | passive | Secondary winding (9-6), dotted end. 12 V, 1.5 A; 20 mOhm max DCR; turns ratio 2.67:1 (pri:sec). |
| 10 | 10 | passive | Secondary winding (10-7), dotted end. 12 V, 1.5 A; 23 mOhm max DCR. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Pulse Electronics |
| Package | Unknown |
| Category | Transformers |
| Pins | 10 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DCR | DCR | | | 62 | mΩ | Pins (1-3) | 1 |
| DCR | DCR | | | 20 | mΩ | Pins (9-6) | 1 |
| DCR | DCR | | | 23 | mΩ | Pins (10-7) | 1 |
| DCR | DCR | | | 120 | mΩ | Pins (4-5) | 1 |
| Leakage inductance | Lk | | | 0.67 | uH | Pins (10,9,6,7,4,5) shorted | 1 |
| Hi-Pot Pri-Sec | | | | 2250 | Vdc | Pri-Sec | 1 |
| Primary inductance tolerance | | -10 | | 10 | % | | 1 |
| Primary inductance | Lpri | | 41 | | uH | Pins (1-3) | 1 |
## CAD (Adom-generated)
- Symbol: `PA3855.003NLT`
- Footprint: `Adom_Gen:Pulse_Electronics_PA3855_26c196`
- 3D model: generated to fit the land (STEP)
- 3D model files: `pa3855-003nlt-etched.step` / `pa3855-003nlt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pa3855-003nlt.step` / `pa3855-003nlt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Pulse Electronics datasheet](https://yageogroup.com/download/datasheet/PA3855.003NLT) (5 pp, sha256 `bbde64296ac74e15`, retrieved 2026-11-18)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
[Datasheet PDF](docs/pa3855-003nlt-datasheet.pdf)