main
Ray
Publish 0.1.0
bd7091a
P82B96PWR
Texas Instruments · Signal Buffers, Repeaters, Splitters · TSSOP-8
P82B96PWR from Texas Instruments, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Sx | bidirectional | Serial data bus (SDA) I/O that connects to the I2C master's VCC through a pullup resistor; Sx sinks up to 3 mA static current and is rated for the 15 V maximum I2C bus voltage. |
| 2 | Rx | input | Receive input from the buffered bus; it connects to the VCC of the P82B96 through a pullup resistor, and a low here pulls the Sx I2C pin low. |
| 3 | Tx | output | Open-collector transmit output that connects to the VCC of the P82B96 through a pullup resistor and can be pulled up to 15 V without VCC present. |
| 4 | GND | power_in | Ground reference for the device; the GND pin must be tied to ground. |
| 5 | Ty | output | Open-collector transmit output that connects to the VCC of the P82B96 through a pullup resistor and can be pulled up to 15 V without VCC present. |
| 6 | Ry | input | Receive input from the buffered bus; it connects to the VCC of the P82B96 through a pullup resistor, and a low here pulls the Sy I2C pin low. |
| 7 | Sy | bidirectional | Serial clock bus (SCL) I/O that connects to the I2C master's VCC through a pullup resistor; Sy sinks up to 3 mA static current and is rated for the 15 V maximum I2C bus voltage. |
| 8 | VCC | power_in | Supply voltage input, rated 2 V to 15 V, with approximately 100 nF decoupling recommended close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage on VCC pin | VCC | -0.3 | 18 | V | 5 | ||
| Voltage on buffered input Sx or Sy (SDA or SCL) | VI | -0.3 | 18 | V | 5 | ||
| Voltage on buffered input Rx or Ry | VI | -0.3 | 18 | V | 5 | ||
| Voltage on buffered output Sx or Sy (SDA or SCL) | VO | -0.3 | 18 | V | 5 | ||
| Voltage on buffered output Tx or Ty | VO | -0.3 | 18 | V | 5 | ||
| Continuous output current Sx or Sy | IO | 250 | mA | 5 | |||
| Continuous output current Tx or Ty | IO | 250 | mA | 5 | |||
| Continuous current through VCC or GND | ICC | 250 | mA | 5 | |||
| Storage temperature | Tstg | -55 | 125 | °C | 5 | ||
| Supply voltage | VCC | 2 | 15 | V | 5 | ||
| Low-level output current, Sx, Sy | IOL | 3 | mA | VSx, VSy = 1 V, VRx, VRy ≤ 0.42 V | 5 | ||
| Low-level output current, Tx, Ty | IOL | 30 | mA | VSx, VSy = 0.4 V, VTx, VTy = 0.4 V | 5 | ||
| Maximum input/output voltage level, Sx, Sy | VIOmax | 15 | V | VTx, VTy = 0.4 V | 5 | ||
| Maximum input/output voltage level, Tx, Ty | VIOmax | 15 | V | VSx, VSy = 0.4 V | 5 | ||
| Low-level input voltage difference, Sx, Sy | VILdiff | 0.4 | V | 5 | |||
| Operating free-air temperature | TA | -40 | 85 | °C | 5 | ||
| Low-level output voltage, Sx, Sy | VOL | 0.8 | 0.88 | 1 | V | VCC = 2.3 V to 2.7 V; ISx, ISy = 3 mA; full-temperature values per graph only | 6 |
| Low-level output voltage, Sx, Sy | VOL | 0.67 | 0.73 | 0.79 | V | VCC = 2.3 V to 2.7 V; ISx, ISy = 0.2 mA; full-temperature values per graph only | 6 |
| Quiescent supply current | ICC | 0.9 | 2 | mA | VCC = 2.3 V to 2.7 V; Sx = Sy = VCC; max 2 over TA = -40 to 85°C | 6 | |
| Additional supply current per pin low | ΔICC | 1.7 | 3 | mA | VCC = 2.3 V to 2.7 V; Tx, Ty; max 3 over TA = -40 to 85°C | 6 | |
| Dynamic output sink capability on I2C bus | IIOS | 5.5 | 18 | mA | VCC = 2.3 V to 2.7 V; VSx, VSy > 2 V; VRx, VRy = low; min 5.5 over TA = -40 to 85°C (25°C min 7) | 6 | |
| Leakage current on I2C bus | IIOS | 0.1 | 1 | μA | VCC = 2.3 V to 2.7 V; VSx, VSy = 2.5 V; VRx, VRy = high | 6 | |
| Dynamic output sink capability on buffered bus | IOT | 60 | 100 | mA | VCC = 2.3 V to 2.7 V; VTx, VTy > 1 V; VSx, VSy = low; 0.4 V | 6 | |
| Leakage current on buffered bus | IIOT | 0.1 | 1 | μA | VCC = 2.3 V to 2.7 V; VTx, VTy = VCC = 2.5 V; VSx, VSy = high | 6 | |
| Input current from I2C bus | II | -1 | 1 | μA | VCC = 2.3 V to 2.7 V; Sx, Sy; bus low; VRx, VRy = high | 6 | |
| Input current from buffered bus | II | -1 | 1 | μA | VCC = 2.3 V to 2.7 V; Rx, Ry; bus low; VRx, VRy = 0.4 V | 6 | |
| Leakage current on buffered bus input | 1 | 1.5 | μA | VCC = 2.3 V to 2.7 V; VRx, VRy = VCC | 6 | ||
| Input logic level high threshold on normal I2C bus, Sx, Sy | VIT | 0.65 | 0.7 | V | VCC = 2.3 V to 2.7 V | 6 | |
| Input logic level low threshold on normal I2C bus, Sx, Sy | VIT | 0.6 | 0.65 | V | VCC = 2.3 V to 2.7 V | 6 | |
| Input logic level high threshold, Rx, Ry (0.58 x VCC) | VIT | 0.58 | x VCC | VCC = 2.3 V to 2.7 V | 6 | ||
| Input logic level low threshold, Rx, Ry (0.42 x VCC) | VIT | 0.42 | x VCC | VCC = 2.3 V to 2.7 V | 6 | ||
| Input/output logic level difference for I2C applications | VIOdiff | 100 | 150 | mV | VCC = 2.3 V to 2.7 V; (VSx output low at 3 mA) - (VSx input high max) | 6 | |
| VCC voltage at which all buses are released | VIOrel | 1 | 1 | V | VCC = 2.3 V to 2.7 V; Sx, Sy, Tx, Ty lowered until released | 6 | |
| Dynamic output sink capability on I2C bus | IIOS | 5.7 | 18 | mA | VCC = 3 V to 3.6 V; VSx, VSy > 2 V; VRx, VRy = low; min over TA = -40 to 85°C | 7 | |
| Dynamic output sink capability on I2C bus | IIOS | 6 | 18 | mA | VCC = 4.5 V to 5.5 V; VSx, VSy > 2 V; VRx, VRy = low; min over TA = -40 to 85°C | 8 | |
| Dynamic output sink capability on I2C bus | IIOS | 6.5 | 18 | mA | VCC = 15 V; VSx, VSy > 2 V; VRx, VRy = low; min over TA = -40 to 85°C | 9 | |
| Temperature coefficient of input thresholds, Sx, Sy | ΔV/ΔTIN | -2 | mV/°C | Sx, Sy | 6 | ||
| Temperature coefficient of output low levels, Sx, Sy | ΔV/ΔTOUT | -1.8 | mV/°C | VCC = 2.3 V to 2.7 V; ISx, ISy = 0.2 mA | 6 | ||
| Temperature coefficient of release voltage | ΔV/ΔTREL | -4 | mV/°C | VCC = 2.3 V to 2.7 V | 6 | ||
| Input capacitance, Rx, Ry | Cin | 2.5 | 4 | pF | VCC = 2.3 V to 2.7 V | 6 | |
| Junction-to-ambient thermal resistance, PW (TSSOP) | RθJA | 173.5 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance, PW (TSSOP) | RθJC(top) | 57.6 | °C/W | 5 | |||
| Junction-to-board thermal resistance, PW (TSSOP) | RθJB | 101.8 | °C/W | 5 | |||
| Junction-to-top characterization parameter, PW (TSSOP) | ψJT | 5.3 | °C/W | 5 | |||
| Junction-to-board characterization parameter, PW (TSSOP) | ψJB | 100.2 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
P82B96PWR - Footprint:
Package_SO:TSSOP-8_4.4x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
p82b96pwr-etched.step/p82b96pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);p82b96pwr.step/p82b96pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
8a684e53944a9929, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# P82B96PWR
**Texas Instruments** · Signal Buffers, Repeaters, Splitters · TSSOP-8
P82B96PWR from Texas Instruments, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Sx | bidirectional | Serial data bus (SDA) I/O that connects to the I2C master's VCC through a pullup resistor; Sx sinks up to 3 mA static current and is rated for the 15 V maximum I2C bus voltage. |
| 2 | Rx | input | Receive input from the buffered bus; it connects to the VCC of the P82B96 through a pullup resistor, and a low here pulls the Sx I2C pin low. |
| 3 | Tx | output | Open-collector transmit output that connects to the VCC of the P82B96 through a pullup resistor and can be pulled up to 15 V without VCC present. |
| 4 | GND | power_in | Ground reference for the device; the GND pin must be tied to ground. |
| 5 | Ty | output | Open-collector transmit output that connects to the VCC of the P82B96 through a pullup resistor and can be pulled up to 15 V without VCC present. |
| 6 | Ry | input | Receive input from the buffered bus; it connects to the VCC of the P82B96 through a pullup resistor, and a low here pulls the Sy I2C pin low. |
| 7 | Sy | bidirectional | Serial clock bus (SCL) I/O that connects to the I2C master's VCC through a pullup resistor; Sy sinks up to 3 mA static current and is rated for the 15 V maximum I2C bus voltage. |
| 8 | VCC | power_in | Supply voltage input, rated 2 V to 15 V, with approximately 100 nF decoupling recommended close to the pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-8 |
| Category | Interface |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage on VCC pin | VCC | -0.3 | | 18 | V | | 5 |
| Voltage on buffered input Sx or Sy (SDA or SCL) | VI | -0.3 | | 18 | V | | 5 |
| Voltage on buffered input Rx or Ry | VI | -0.3 | | 18 | V | | 5 |
| Voltage on buffered output Sx or Sy (SDA or SCL) | VO | -0.3 | | 18 | V | | 5 |
| Voltage on buffered output Tx or Ty | VO | -0.3 | | 18 | V | | 5 |
| Continuous output current Sx or Sy | IO | | | 250 | mA | | 5 |
| Continuous output current Tx or Ty | IO | | | 250 | mA | | 5 |
| Continuous current through VCC or GND | ICC | | | 250 | mA | | 5 |
| Storage temperature | Tstg | -55 | | 125 | °C | | 5 |
| Supply voltage | VCC | 2 | | 15 | V | | 5 |
| Low-level output current, Sx, Sy | IOL | | | 3 | mA | VSx, VSy = 1 V, VRx, VRy ≤ 0.42 V | 5 |
| Low-level output current, Tx, Ty | IOL | | | 30 | mA | VSx, VSy = 0.4 V, VTx, VTy = 0.4 V | 5 |
| Maximum input/output voltage level, Sx, Sy | VIOmax | | | 15 | V | VTx, VTy = 0.4 V | 5 |
| Maximum input/output voltage level, Tx, Ty | VIOmax | | | 15 | V | VSx, VSy = 0.4 V | 5 |
| Low-level input voltage difference, Sx, Sy | VILdiff | | | 0.4 | V | | 5 |
| Operating free-air temperature | TA | -40 | | 85 | °C | | 5 |
| Low-level output voltage, Sx, Sy | VOL | 0.8 | 0.88 | 1 | V | VCC = 2.3 V to 2.7 V; ISx, ISy = 3 mA; full-temperature values per graph only | 6 |
| Low-level output voltage, Sx, Sy | VOL | 0.67 | 0.73 | 0.79 | V | VCC = 2.3 V to 2.7 V; ISx, ISy = 0.2 mA; full-temperature values per graph only | 6 |
| Quiescent supply current | ICC | | 0.9 | 2 | mA | VCC = 2.3 V to 2.7 V; Sx = Sy = VCC; max 2 over TA = -40 to 85°C | 6 |
| Additional supply current per pin low | ΔICC | | 1.7 | 3 | mA | VCC = 2.3 V to 2.7 V; Tx, Ty; max 3 over TA = -40 to 85°C | 6 |
| Dynamic output sink capability on I2C bus | IIOS | 5.5 | 18 | | mA | VCC = 2.3 V to 2.7 V; VSx, VSy > 2 V; VRx, VRy = low; min 5.5 over TA = -40 to 85°C (25°C min 7) | 6 |
| Leakage current on I2C bus | IIOS | | 0.1 | 1 | μA | VCC = 2.3 V to 2.7 V; VSx, VSy = 2.5 V; VRx, VRy = high | 6 |
| Dynamic output sink capability on buffered bus | IOT | 60 | 100 | | mA | VCC = 2.3 V to 2.7 V; VTx, VTy > 1 V; VSx, VSy = low; 0.4 V | 6 |
| Leakage current on buffered bus | IIOT | | 0.1 | 1 | μA | VCC = 2.3 V to 2.7 V; VTx, VTy = VCC = 2.5 V; VSx, VSy = high | 6 |
| Input current from I2C bus | II | -1 | | 1 | μA | VCC = 2.3 V to 2.7 V; Sx, Sy; bus low; VRx, VRy = high | 6 |
| Input current from buffered bus | II | -1 | | 1 | μA | VCC = 2.3 V to 2.7 V; Rx, Ry; bus low; VRx, VRy = 0.4 V | 6 |
| Leakage current on buffered bus input | | | 1 | 1.5 | μA | VCC = 2.3 V to 2.7 V; VRx, VRy = VCC | 6 |
| Input logic level high threshold on normal I2C bus, Sx, Sy | VIT | 0.65 | 0.7 | | V | VCC = 2.3 V to 2.7 V | 6 |
| Input logic level low threshold on normal I2C bus, Sx, Sy | VIT | | 0.6 | 0.65 | V | VCC = 2.3 V to 2.7 V | 6 |
| Input logic level high threshold, Rx, Ry (0.58 x VCC) | VIT | 0.58 | | | x VCC | VCC = 2.3 V to 2.7 V | 6 |
| Input logic level low threshold, Rx, Ry (0.42 x VCC) | VIT | | | 0.42 | x VCC | VCC = 2.3 V to 2.7 V | 6 |
| Input/output logic level difference for I2C applications | VIOdiff | 100 | 150 | | mV | VCC = 2.3 V to 2.7 V; (VSx output low at 3 mA) - (VSx input high max) | 6 |
| VCC voltage at which all buses are released | VIOrel | | 1 | 1 | V | VCC = 2.3 V to 2.7 V; Sx, Sy, Tx, Ty lowered until released | 6 |
| Dynamic output sink capability on I2C bus | IIOS | 5.7 | 18 | | mA | VCC = 3 V to 3.6 V; VSx, VSy > 2 V; VRx, VRy = low; min over TA = -40 to 85°C | 7 |
| Dynamic output sink capability on I2C bus | IIOS | 6 | 18 | | mA | VCC = 4.5 V to 5.5 V; VSx, VSy > 2 V; VRx, VRy = low; min over TA = -40 to 85°C | 8 |
| Dynamic output sink capability on I2C bus | IIOS | 6.5 | 18 | | mA | VCC = 15 V; VSx, VSy > 2 V; VRx, VRy = low; min over TA = -40 to 85°C | 9 |
| Temperature coefficient of input thresholds, Sx, Sy | ΔV/ΔTIN | | -2 | | mV/°C | Sx, Sy | 6 |
| Temperature coefficient of output low levels, Sx, Sy | ΔV/ΔTOUT | | -1.8 | | mV/°C | VCC = 2.3 V to 2.7 V; ISx, ISy = 0.2 mA | 6 |
| Temperature coefficient of release voltage | ΔV/ΔTREL | | -4 | | mV/°C | VCC = 2.3 V to 2.7 V | 6 |
| Input capacitance, Rx, Ry | Cin | | 2.5 | 4 | pF | VCC = 2.3 V to 2.7 V | 6 |
| Junction-to-ambient thermal resistance, PW (TSSOP) | RθJA | | 173.5 | | °C/W | | 5 |
| Junction-to-case (top) thermal resistance, PW (TSSOP) | RθJC(top) | | 57.6 | | °C/W | | 5 |
| Junction-to-board thermal resistance, PW (TSSOP) | RθJB | | 101.8 | | °C/W | | 5 |
| Junction-to-top characterization parameter, PW (TSSOP) | ψJT | | 5.3 | | °C/W | | 5 |
| Junction-to-board characterization parameter, PW (TSSOP) | ψJB | | 100.2 | | °C/W | | 5 |
## CAD (KiCad official)
- Symbol: `P82B96PWR`
- Footprint: `Package_SO:TSSOP-8_4.4x3mm_P0.65mm`
- 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files: `p82b96pwr-etched.step` / `p82b96pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `p82b96pwr.step` / `p82b96pwr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/p82b96.pdf) (38 pp, sha256 `8a684e53944a9929`, retrieved 2026-11-10, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/p82b96pwr-datasheet.pdf)