component
P82B96PW
Public Made by Adomby adom
Texas Instruments Signal Buffers, Repeaters, Splitters, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownP82B96PW
Texas Instruments · Signal Buffers, Repeaters, Splitters · TSSOP-8
P82B96PW from Texas Instruments, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Sx | bidirectional | Serial data bus or SDA; connect to VCC of the I2C master through a pullup resistor. |
| 2 | Rx | input | Receive signal; connect to VCC of the P82B96 through a pullup resistor. |
| 3 | Tx | output | Transmit signal; connect to VCC of the P82B96 through a pullup resistor. |
| 4 | GND | power_in | Ground. |
| 5 | Ty | output | Transmit signal; connect to VCC of the P82B96 through a pullup resistor. |
| 6 | Ry | input | Receive signal; connect to VCC of the P82B96 through a pullup resistor. |
| 7 | Sy | bidirectional | Serial clock bus or SCL; connect to VCC of the I2C master through a pullup resistor. |
| 8 | VCC | power_in | Supply voltage, specified at 2 V to 15 V in the recommended operating conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-8 |
| Category | Interface |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
P82B96PW - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
p82b96pw-etched.step/p82b96pw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);p82b96pw.step/p82b96pw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
8a684e53944a9929, retrieved 2026-10-08, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).